subcategories
(3rd category level)
Manufacturer:
(Category: 109)
plate thickness: mmsheet width: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m
tube diameter:40-90 mmwall strength:20 mmweight of the machine ca.:11 tdimensions of the machine ca.:4 x 1,6 x 1,35 mbending radius max.:270 mmThis machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure valve ...
diameter:210 mmweight of the machine ca.:0,05 tturning speeds:4200 Bore:75 mmclamping diameter:254 mmdimensions of the machine ca.:0,6 x 0,5 x 0,4 m2-jaw power operating chuck with draw pipe and various jaw sets.
screw size:60 mmclosing pressure:3500 kNweight of the machine ca.:25,5 t
x-travel:650 mmy-travel:450 mmz-travel:420 mmcontrol:MAKINO Hyper i U-axis:± 75 mmV-axis:± 75 mmmax. size of workpiece LxWxH:1000 x 800 x 400 mmworkpiece weight:max. 1500 kgTable dimensions:910 x 710 mmweight of the machine ca.:5 tDimensions (L/W/H):3 x 3 x 2,3 mmMemory:10 GB Wire EDM in good condition.
bore capacity in steel (diameter):12 mmthroat:300 mmbore stroke:80 mmtotal power requirement:1,5 kWweight of the machine ca.:1,2 tdimensions of the machine ca.:0,6 x 0,7 x 2,1 mAppr. 100 year old column boring machine, complete overhould and ready to operate- swivel table, base table- taper tool chuck- base motor with drive belt to overhead spindle
bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmDist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mmDistance between spindle axis and column:350 - 1260 spindle taper:4 MKRange of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mmtotal power requirement:3,5 kWdimensions of the machine ca.:2150x1070x2840 mfeed:0,09 - 1,5 m/minweight of the machine ca.:3 t
length:1600 mmwidth:1000 mmplate height:200 mmweight of the machine ca.:1 tdimensions of the machine ca.:1,6 x 1,0 x 1,3 mHardstone measuring plate with support desk and 2 tailstocks
working area:2500 mmFree moveable 6-axis measuring device- operating software- W-Lan- ball tracer
Basket size LxWxH:600 mmMax. basket weight:80 kgNo. of washing chambers:1 Temperature for washing water:60 °CElectrical heating power:4 kWtotal power requirement:5 kWLoading:Höhe bis 300 tank capacity:50 lCapacity:60 l/minMachine size LxWxH:0,75 x 1,0 x 1,2 mStainless steel high pressure cleaning machine for industrial use with basket diameter 600 mmWorkpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets- pneumatic spring supported machine lit- stainless steel driven basket- spraying bars and pump stainless steel design- loading basket with Jog function
faceplate diameter:4000 mmswing diameter:4300 mmturning height:2500 mmmax. workpiece weight:63 ttotal power requirement:125 kWweight of the machine ca.:134 tdimensions:6100x10400x8400 mmUsed Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.
Workbench drilling Machine GUILLARDON GT 16 Cone: CM2 Spindle exit: 150 mm Rotation: from 150 to 3000 RPM Table size: 400 x 400 mm Rotation right / left Throat depth: 280 mm Spindle diameter: Ø 60 mm Column diameter: Ø 105 mm 2 speeds motor Speed variation by belt drive Non-functional electronic drive Manual Descent Maxi height mandrel/table: 450 mm Mini height mandrel/table: 150 mm Sold with the table Voltage: 380 V Width: 500 mm Depth: 900 mm Total height on the table in high position: 2100 mm Total height on the table in a low position: 1700 mm Weight: approx 350 kg
Laser cutting machine Type: ADILAS Manufacturer: BLM/ADIGE Year: 2008 Laser type: CO2 Power: 3500 W Number of tables: 2 interchangeable Working area: 6000 x 3000 mm Laser hours: 20,000 The generator was serviced at about 12,000 hours. Steel: up to 20 mm Stainless steel sheets: up to 12 mm Aluminum: up to 6 mm Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Stiefelmayer 3D Horizontal Arm Coordinate Measuring & Marking Machine – 5000 x 1750 mm Plate Overview / Description: For sale is a high-precision, manual 3D horizontal arm coordinate measuring machine (CMM) and layout station manufactured by Stiefelmayer, complete with a heavy-duty cast iron surface plate (Spezialgußeisen) and Carl Zeiss IMT digital electronics. Ideal for large-part inspection, prototype construction, automotive cubing, and casting marking/layout tasks. Technical Specifications Measuring Plate / Bed (Stiefelmayer) - Manufacturer: Stiefelmayer - Plate Dimensions (L × W × H): 5000 mm × 1750 mm × 350 mm - Plate Material: Special Cast Iron (Spezialgußeisen mit Stahlzusatz) - Plate Weight: Approx. 5,800 kg - Surface Flatness: DIN 876/II (precision ground) - Base Supports: 10 × Height-adjustable cast iron levelling feet (Stützböcke, adjustable 370–470 mm) - W ...
AEG Double Grinding and Polishing Machine – Type DP 300/2200 -Operating voltage: 380 V -Motor power: 2.2 kW -Max. disc diameter: Ø 300 mm -Max. pane width: 50 mm -Polishing spindle speed: 1,400 rpm Dimensions: LxWxH 1.2x0.4x0.9 meters / Weight 180Kg
B50 - Mech. Bending machine/reinforcing steel bending machine New / Unused Year of construction 2026 -Technical data see data sheet Dimensions LxWxH 1.4x1.3x1.5 meters / Weight 500Kg
HAHNDORF Type SEW 52/300mm / Groove Shaping Machine -Keyway slotting machine suitable for slotting inner keyways into gears / Pulleys or hubs. -Stroke length max. 300mm -Groove width max. 32mm -Cutting speed 5 meters/minute - Return approx. 5 meters / minute -Face plates / table diameter approx. 380 x 300 mm -Smallest bore with spec. Bumper blade 6mm -With plunger inserts 20mm -With normal bumper 60mm -Drive power 1.1 KW -Bumper with bumper insert -Connection cable Dimensions: LxWxH 1.2x0.6x1.6 meters / Weight 350Kg
Hydraulic Material - 5 Carts with Fittings and Components Type: Hydraulic material Contents: 5 carts loaded with new hydraulic components stored in assorted bins Load capacity: 200 kg - 500 kg Approx. total weight: 4000 kg Approx. dimensions per cart (L x W x H): 1300 x 1300 x 2000 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-38
Various Hydraulic Cylinders Type: Various hydraulic cylinders and hydraulic components Contents: Assorted hydraulic cylinders of various sizes and types, including compact hydraulic motors and valve blocks, stored on a 5-shelf wooden rack Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-40
MITUTOYO PJ - -CE marking -Projection screen 315mm with reticle -Image display : Reversed / Inverted - Standard - magnification 10x objective -Angle measurement integrated digital angle display (resolution 0.01 degree / measuring range +- 360 degrees -Optic Type: Telecentric optical system for distortion-free measurements -Measuring range approx. 150x50mm -Lighting type: halogen illumination for transmitted light (contour) and incident light (surface) -Data output RS 232 C & data processor QM -DATA 200 included Dimensions: LxWxH 0.8x0.8x1.2 meters / weight approx. 120Kg
This 4-axis ONA KE500 wire EDM machine was manufactured in 2004. It features a maximum workpiece weight capacity of 5000 kg and a Z-axis travel of 400 mm. The machine offers impressive X-Y travel dimensions of 700 x 500 mm and U-V travel of 460 x 460 mm. If you are looking to get high-quality wire EDM capabilities, consider the ONA KE500 machine we have for sale. Contact us for further details.
This 5-axis FANUC Robocut alpha-C400iC was manufactured in 2023. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 255 mm. The machine has a permissible workpiece weight of 500 kg, making it suitable for various applications. If you are looking to get high-quality die-sinking capabilities, consider the FANUC Robocut alpha-C400iC machine we have for sale. Contact us for further details.
Deckel-Maho DMU50 X: 500 - Y: 400 - Z: 400 mm CNCMax longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 400 mm Power on spindle: 13 kW Admission in boring head (ISO): BT 40 Spindlespeeds: 20 > 9000 rpm Table size: 700 x 500 mm Control: Heidenhain TNC 426 Length: 2700 mm Depth : 2700 mm Height: 2500 mm Weight: 3,5 ton Toolholder: yes Number of tools: 16 positions
A compact electroplating unit is offered. Electrolytic bath for gold and silver refining applications, control: microprocessor control. Equipped with an integrated control unit with display and keypad. Weight: approx. 15kg, overall dimensions X/Y/Z: approx. 450mm/300mm/350mm. Inspection by arrangement is possible.
1.600 € 
