We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 103)
used
x-travel:1000 mmy-travel:320 mmz-travel:400 mmTable dimensions:1000 x 400 mm
used
adjustment drive of the grinding spind.slide:0,0025 - 0,05 mmtotal power requirement:100 kWadjustment of grinding head slide:150 mmweight of the machine ca.:17 tgrinding spindle drive:2 x 37 kWgrinding width:30-150 mmperipheral speed:34 m/secworkpiece speeds:60 - 300 mm/Sek.grinding height:70 mmgrinding wheel diameter:750 mmgrinding tools:750 x 75 x 350 mmgrinding wheel turning speeds:870 U/Min.max. workpiece diameter:250 mm
used
The pick-up station attached to the rear slot table, including the clamped cutter head, is not part of the offer
used
used
used
used
x-travel:200 mmy-travel:100 mmz-travel:100 mmtotal power requirement:1,5 kWweight of the machine ca.:1,1 tdimensions of the machine ca.:0,6 x 0,6 x 1,8 mtable-size:350 x 150 mmNew class condition milling machine with vize and dividing head- Original year of manufacture unknown
used
Year of construction: approx. 1981 Accessories: - Universal milling head, tangential milling head, - Interchangeable wheels - 2 cutting equipment, - little used
used
x-travel:14000 mmy-travel:3100 mmz-travel:1.200 mm (220 - 1.420) mmdistance between columns:4.417 mmtable-size:14.000 x 2.500 mmworkpiece weight:15.000 kg/mdrive capacity - spindle motor:25 kWspindle cone:63 HSKspindle turning speed range:18000 rpmmilling feeds:30000 mm/mindimensions of the machine ca.:15.000 x 8.418 x 6.033 mmweight of the machine ca.:135 tCNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach
used
x-travel:2000 mmy-travel:800 mmz-travel:800 mmtable-size:2.000 x 700 mmworkpiece weight:3500 kgdrive capacity - spindle motor:17 kWspindle cone:50 ISOspindle turning speed range:3000 U/mindimensions of the machine ca.:5265 x 3250 x 2730 mweight of the machine ca.:9 tCNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines.- Completely repair of the head, replacing bearings, shafts and engaging gears.- Completely replacement of all the bearings of the machine.- Replacing the joining screws of the bodies.- Completely repair of spindles.- Adjustment and repair of axis.- Grinding and adjusting all guides, because of deterioration.- Grinding and adjusting of the guide ways of the ram.- Repairing o ...
used
Operating voltage: 230 VFrequency: 50 – 60 HzRated current: 2.8 AControl: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)Tool holder: probably SK 30Max. tool clamping length: 35 mmTable dimensions: 420 x 120 mmwith 2 grooves and a special EMCO viceJaw width: 60 mmTravel - X: approx. 190 mm, Y: approx. 140 mm, Z: approx. 260 mmincl. matching mobile workbench with various suitable contentsincl. 7-fold tool changer, collets and various matching tool holdersNote: An identical and completely identical machine will be delivered and not exactly the one shown in the photos.
new
x-travel:1000 mmy-travel:1150 mmz-travel:700 mmtable-size:900 mmtable load:1500 kgspindle speeds:10.000 1/minspindle drive:Motorspindel von Cytec CS34-180-A 34&42KW/160&200 Nmspindle taper:A100 HSKT-slots:18mm/7/100 mmmilling feed range:20.000 mm/minrapid traverse feeds:X/Y/Z: 24 m/mindiameter of tools max.:150 mmworkpiece length:300 mmweight of tools max.:20 kgweight of the machine ca.:15 tdimensions of the machine ca.:s. Katalog mCNC controller:Heidenhain iTNC-640 HSCI-Steuerung cnc rotary table:von Cytec; mit Ø900mm; 800 1/min Drehmomenttisch (AS3347) + HSK-T63/100 Spindel & ATC + TNC-640 Fräsdrehzahlregelung B-axis:Fräskopf, 0-180° c-axis:0,001° automatic tool changer:HSK-A/T100; 60 fachScales:in X/Y/Z von Heidenhain mit Druckluft inner coolant:20
used
used
x-travel:3600 mmy-travel:1250 mmz-travel:1600 mmtable load capacity:8000 kptable clamping surface::4100 x 1050 feed range:10 - 5000 mm/minrapid traverse feeds:10000 mm/minspindle motor:29 kWspindle taper::ISO 50spindle turning speed range:5 - 4000 U/mintotal power requirement:70 kWweight of the machine ca.:28 tdimensions of the machine ca.:8,5 x 5,4 x 3,2 mMachine with Heidenhain TNC 430 Steuerung- tool changer 30-fold- milling head indexable 2,5°- 4. axis turn table
used
x-travel:600 mmy-travel:450 mmz-travel:400 mmTable area:700 x 480 mmspindle turning speed range:10 - 3150 U/minspindle taper ISO:40 quill stroke:80 mmdimensions of the machine ca.:1,8 x 2,1 x 1,9 mtotal power requirement:8 kWweight of the machine ca.:3,5 tMachine with universal turn, sviwel and tilting table- CNC control DIALOG II- splash guards- misc. parts
used
Spindle diameter horizontal 75 mm, spindle diameter vertical 55 mm, feed X-/ Y-axis 1-5000 mm/min, feed Z-axis 10000 mm/min, tool holder SK40, 32 tool positions
used
Machine number: 2820-0492Operating voltage: 400 VFrequency: 50/60 HzRated current: 19 AControl: DECKEL CONTUR 3Travel X-axis: 400 mmTravel Y-axis: 400 mmTravel Z-axis: 400 mmFeed: 2 - 3600 mm/minRapid traverse: up to 4 m/minTool holder: SK 40Table dimensions: 700 x 460 mmwith 7 groovesincl. vice, jaw width: 110 mmReference: Hüpometall - Lot 22
used
This 5-axis SCHÃCO AS 100 was manufactured in 2022. It features a machine bed length of 9,000 mm and allows for 6-sided processing with two 5-axis towers. The machine includes 5 movable clamping blocks with independent drives and a saw blade diameter of 450 mm. If you are looking to get high-quality profile machining capabilities, consider the SCHÃCO AS 100 universal machining centre we have for sale. Contact us for further details.
used
This 3-axis TOS KUÅIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUÅIM FS 100 S/A3 vertical machining centre. Contact us for more information.
used
This 4-axis SCHÃCO PBX AL was manufactured in 2008. It features a processing length of 7,200 mm and is designed for the machining of aluminum profiles, including double-bar processing and through-feed capability for longer profiles. The machine includes an automatic tool changer and clamping blocks for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the SCHÃCO PBX AL universal machining centre we have for sale. Contact us for further details.
used
This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine.
used
This 4-axis SCHÃCO Profilbearbeitungscenter 299 650 was manufactured in 2004. It features a powerful 21 kW motor and operates at a voltage of 380 V. With a maximum operating pressure of 0.8 MPa and a weight of 5,000 kg, this machine is designed for robust performance. If you are looking to get high-quality machining capabilities, consider the SCHÃCO Profilbearbeitungscenter 299 650 universal machining centre we have for sale. Contact us for further details.
used
x-travel:30000 mmy-travel:3600 mmz-travel:1900 mmmilling head speed:1 - 4000 U/minspindle taper ISO:50 feed speeds:1 - 10000 mm/minrapid traverse:25 m/minmilling spindle motor:46 kWtotal power requirement:85 kWdimensions of the machine ca.:45 x 8,7 x 5,5 ü.F. mwith CNC HEIDENHAIN iTNC 530autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm )2 chip conveyors, coolant attachment
used
This 3-axis ARES-SEIKI R4530 was manufactured in 2006. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 300 mm. The machine includes a work table size of 600 mm x 300 mm and a maximum table load of 200 kg. If you are looking to get high-quality machining capabilities, consider the ARES-SEIKI R4530 vertical machining centre we have for sale. Contact us for further details.
used
This HAAS VF-2, manufactured in 2008, offers strong machining capability with 706 mm of X-axis travel, 406 mm on the Y-axis, and 508 mm on the Z-axis. Equipped with a spindle speed of 8100 rpm and a powerful 22.4 kW spindle motor, it is well suited for demanding milling applications. The visual and technical condition of the machine is very good for its age. Contact us for more information.
used
x-travel:2000 mmy-travel:1500 mmz-travel:1460 mmmilling spindle motor:35/30 kWspindle taper ISO:50 spindle turning speed range:24 - 3000 U/mintable surface area:1350 x 1550 mmtable load:6 tfeed speeds:10 - 3000 mm/minrapid speed:10 m/mintotal power requirement:48 kWweight of the machine ca.:24 tCNC HEIDENHAIN TNC 426B-axis table roundHoriz. and Vertikal automatic positioning Milling Head
used
This HAAS VF-3 vertical machining center, manufactured in 2017, offers strong milling performance with a large 1219 Ã 457 mm table and a load capacity of 1588 kg. It is equipped with an 8100 rpm spindle and includes a chip conveyor as well as a through-spindle coolant 21 bar option. The machine is in excellent technical condition. If you are looking for high-quality milling capabilities, consider the HAAS VF-3 we have for sale. Contact us for more information.
used
x-travel:16300 mmy-travel:2600 mmz-travel:1600 mmspindle taper ISO:50 spindle turning speed range:22 - 4000 U/minrapid traverse:24 / 36 m/minmain drive:37 kWtotal power requirement:50 kWwith CNC HEIDENHAIN TNC 430automatic Universal Milling Headautomatic toolchanger 90-pocketscoolant attchament and chip conveyor