Manufacturer:
(Category: 104)
grinding length: . mmgrinding width: . mmworkpiece height: . mmtotal power requirement: 146 kWweight of the machine ca.: 140 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: max. 630 mmgrinding width: max. 200 mmworkpiece height: . mmx-axis: max. 250 mmy-axis: max. 710 mmdistance spindle center to table: max. 500 mmtable surface area: 0,25 mmtable load: max. 1,1 ttable speed -stepless-: 2 - 18 m/mincross feed autom.: . dust exhaust: 0,25 kWcoolant pump: 0,09 kWtotal power requirement: ca. 4,5 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 2400 x 1600 x 1900 mmAdjustmentsY axis: 1 scale value = 0.005 mmZ axis: 1 scale value = 0.002 mmManual adjustment (within the range of 250 mm of the Y axis): 80 mmSpeeds:automatic cross feedAdjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke,- continuous: 0 - 4 m/minGrinding wheel Ø max. 200 mmGrinding wheel bore: 51 mmGrinding wheel width: 20 mmDiamond dressing unitDigitaldisplay for 2 advertisement vertical infeedThe data for this ad was created with ModulMWS - the sof ...
width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 100 x 915 mmwork table:: 225 x 155 mmtotal power requirement: 0,44 kWweight of the machine ca.: 0,018 tdimensions of the machine ca.: 0,56 x 0,26 x 0,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...
Rogers 300 HYD Knife Roll Grinder Model: 300 HYD Size 102 Year of arrival at the plant: 1961 Space used by the machine: 7 x 2 x 1,8m Worktable dimensions: 2600 x 250,50 mm. Longitudinal table travel (stroke): 3000 mm. Magnetic system of the table: EML 15 - 115 Volts - 13 Amp - 1500 Watts. Longitudinal slide feed: 0 - 28 m/min. Cross travel without abrasive wheel: 200 mm. Cross travel with new abrasive wheel: 92 mm. Vertical Capacity: 200 mm. Abrasive wheel: Ring abrasive wheel, 26" outer dia., made up of 10 segments type 53 (S/G FLAT RS-801-B) of 6.1/2 "x 2 "x6". Each segment must indicate the maximum RPM for the ring. Abrasive wheel head speed: 560 Rpm. Cooling tank capacity: 259 liters
used
May SS80 U Machine can be visited by arrangement under power
Prior sale reserved - errors possible Internal Reference Number: D-1143-3
Prior sale reserved - errors possible Internal Reference Number: D-1143-2
grinding wheel diameter: 315 mmgrinding wheel width: 40 no. of working stations: 2 Stückspeeds: 1745 U/minvoltage: 380 Vtotal power requirement: 1,1 kWweight of the machine ca.: 230 kgdimensions of the machine ca.: 0,85 x 0,45 x 1,05 mS/N: 48817The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.
Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg
grinding diameter: 350,450 mmgrinding length: 600 mmcentre height: 175,225 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ±10 °longitudinal feed of the table: 900 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 70 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 3,1 x 2,0 mAs the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and withwarranty, but we can also offer you the service for your machines.Foto von bereits gelieferter Maschine mit eventuell anderen Op ...
grinding diameter: 5 - 255 mmgrinding length: 300 mmcentre height: 130 mmgrinding length at plunge grinding: 50 mmcontrol: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/minwork piece spindle speed: 0 - 500 U/minfeed of grinding spindle slide cross: 0 - 5000 mm/mintable speeds: 0 - 5 m/mingrinding wheel diameter: 450 mmtotal power requirement: 10 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,65 x 2,2 x 2,35 mAccessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition
! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages
Discus Werke DSH 600/1000 Side Surface Grinding Machine This type of machine is a machine with a motor-driven grinding spindle. The clamping and grinding of the workpieces is carried out with clamping devices tailored to the respective work. The devices are attached to the machine bed. The column saddle on which the motor spindle is mounted serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side Surface Grinding Machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 liters Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of construction: 1964 Condition: used The side surface grinding machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, ...
Manufacturer Producer Saacke Typ type UW2 CNC Year of construction Construction year 1989 Steuerung control Sinumerik Machine size machine size 3500x3000x2500 mm Spannung Voltage 400 V Machine weight machine weight approx. 2.5 t
Grinding range: 400 x 200 mm Magnet table: 400 x 175 mm Height adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm. Equipped with: - Coolant device - Band filter - Hydraulic system - Operating instructions Country of origin: Germany Motor power: 1.5 kW Machine LxWxH: 2200 x 1500 x 2100 mm Machine Weight: 1100 kg
Grinding length: 500 mm Grinding diameter: 300 mm Grinding wheel diameter: 400 mm Equipped with: - Bezel - Grinding wheels Country of origin: Germany Machine LxWxH: 2300 x 1700 x 1700 mm Machine Weight: 3500 kg
With matching spacer rings according to photos. Scope of delivery according to photo 1.
workpiece length: 610 mmwork piece width: 180 mmworkpiece height: 240 mmdia. of cup wheel: 200 mmtable-size: Ø 280 mmspindle throat: 250 mmspindle speed:: 3000 U/min.voltage: 380 Vtotal power requirement: 2,94 kWweight of the machine ca.: 430 kgdimensions of the machine ca.: 0,85 x 0,75 x 1,90 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
drill diameter: 3-40 mmdrilling length: 500 mmlip angle: 15 - 75 °total power requirement: 4,1 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,80x1,60x1,40 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 1220 mmband speed: 1140 m/min.: 0,62 x 0,4 x 0,35 cmtotal power requirement: 1,5 kWweight of the machine ca.: 0,04 tdimensions: 0,97 x 0,67 x 0,37 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
drill diameter: 1,5 - 25 mmlip angle: 40 - 180 °6-jaw-chucks: various equipment: manual included: Encapsulated drive motor: closed version, air-cooled, rotary and ACdrills with cylindrical or conical shankleft and right-hand drills6 Jaw chuckDevice for compressed air coolingvarious equipment (see pictures)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2000 mmband speed: 33 m/sectotal power requirement: 4 kWweight of the machine ca.: 100 tdimensions of the machine ca.: 1,2 x 0,5 x 0,85 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mmband length: 2000 mmband speed: 37 m/sectotal power requirement: 3 kWweight of the machine ca.: 0,105 tdimensions of the machine ca.: 1,2 x 0,5 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 25 mmband length: 762 mmdimensions of grinding wheel: 125 mmTable tiltable up to: 45 Gradtable surface area: 130 x 130 mmconnected load frequency: 230 Vtotal power requirement: 0,3 kWweight of the machine ca.: 9 Kgdimensions of the machine ca.: 650 x 360 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding range: 2 - 20 mmsharp cornered angle min./max.: 90 - 135 Gradconnected load: 230 Vweight of the machine ca.: 8,6 Kgdimensions of the machine ca.: 0,35 x 0,2 x 0,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gate Sharper Manufacturer Vollmer for Inclined and straight ground
grinding length: . mmgrinding width: . mmworkpiece height: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
