Manufacturer:
(Category: 104)
Surface Grinding Machine Manufacturer: Elbschliff Elb Type SHW4 VA Grinding length 450mm Grinding width 200mm Grinding height 250mm Machine still works very precisely, so geometrically it is still top. Machine will be available from mid-October.
Surface grinding machine manufactured in 1990. This GEIBEL & HOTZ FS 40 SA features a maximum grinding length of 400 mm and a grinding width of 200 mm. It has a maximum workpiece weight capacity of 150 kg and a clamping surface of 600 mm in length. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ FS 40 SA machine we have for sale. Contact us for further details.
This 3-axis KNUTH HFS 50100 F NC was manufactured in 2023. It features a magnetic table measuring 1000 mm x 500 mm and a powerful total power of 14 kW. The machine includes a coolant system with a paper belt filter and magnetic separator, along with essential accessories such as grinding wheel flanges and precision vises. If you are looking to get high-quality surface grinding capabilities, consider the KNUTH HFS 50100 F NC machine we have for sale. Contact us for further details.
This 3-axis ELB Schliff Perfket 6 SPS-NK was manufactured in 2004. It features a grinding range of 600 mm in length, 400 mm in width, and 475 mm in height. The machine has a maximum table load capacity of 600 kg and a longitudinal stroke of 700 mm. If you are looking to get high-quality surface grinding capabilities, consider the ELB Schliff Perfket 6 SPS-NK machine we have for sale. Contact us for further details.
grinding diameter: 700 mmgrinding length: 4000 mmcentre height: 375 mmworkpiece weight: 3000 kggrinding wheel size: 750 x 75 mmgrinding wheel turining speeds: 375 - 1190 U/mincross adjustment of grinding head: 470 turning speed range - workpiece: 12 - 120 U/minmain drive motor: 43 kWworkpiece drive: 4,5 kWtotal power requirement: ca. 50 kWmanufactured 1975/ overhauled 1995The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 175 mmgrinding length: 650 mmgrinding diameter: 350 mmcontrol: Fanuc 0i-TD Resolution: 0,0001 mmgrinding spindle head:: grinding wheel turining speeds: 1-2810 U/mingrinding spindle - swivable: 0-15 -30 °grinding wheel size: 500 x 63 x 203 mmperipheral speed: max. 50 m/secpower capacity: 11,5 kWworkpiece spindle head:: Number of revolutions: 1-1500 U/minpower capacity: 1,8 kWspindle passage: 26 mmFitting taper: MK 4 Tailstock:: taper of center: MK 3/4 quill stroke: 35 mmdiameter of quill: 50 mmfine adjustment: +/- 0,04 mmaxis stroke:: x-axis: 370 mmz-axis: 800 mmb-axis: ? °feeds:: feed speeds: X: 0,001 - 15.000 mm/minfeed speeds: Z: 0,001 - 20.000 mm/minworkpiece weight: 80 kgworkpiece length - max.: 650 mmmax. workpiece diameter: 349 mmtable swivelabel +/-: 10 °total power requirement: 20 kVAweight of the machine ca.: 9 tdimensions of the machine ca.: 3,3 x 2,1 mca ...
Reform AR RFS Type 500 Year of manufacture 1987 Good technical condition.
GER tangential grinding machine mod. RS-10/50 FEATURES Table dimensions: 1000×550 mm Table distance to the center of the grinding wheel: 625 mm Table Speed: 2 to 25 Max Ground Weight: 1000 kgs Longitudinal travel X: 1050 mm Cross travel Y: 500 mm Auto Penetration: Yes Wheel dimensions: Ø 400x80x127 mm Wheel holder: 12.5 HP Hydraulic pump power: 5.5 HP Equipped with Electromagnet: 760×500 mm
KAIR GRINDING MACHINE FEATURES Table length 800 mm Table width 400 mm Wheel diameter 250 mm Wheel width 40 mm Spindle power 2 kW Length x width x total height 4800 × 2000 × 2000 mm Weight 3200 kg
Offer 26204 Technical data: - Inclination-adjustable working position - Sanding belt dimensions approx. 50 x 2000 mm - 2 speeds - Sanding belt fine adjustment - Contact disc diameter 250 mm - Shaft mount left 20 mm - Effective length of the shaft 35 mm - Motorized suction - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 950 x H 1750 x D 750 mm - Base frame H 520 mm - Weight approx. 200 kg
V-trade Economy BMT 2050 UH cylindrical grinding machine built in 2012 provides high precision and excellent machining quality of rotating surfaces with a maximum diameter of 200 mm. Technical specifications of the V-TRADE BMT 2050 UH grinding machine - maximum workpiece diameter: 200 mm - maximum workpiece length: 500 mm - power supply: 3x 400 V - dimensions (L x W x H): 2600 x 1800 x 1600 mm - weight of the V-trade Economy BMT 2050 UH machine: approx. 2500 kg
grinding diameter: 350 mmgrinding length: 660 mmmax. module: 25 min. module: 0,5 Control: CNC total power requirement: 30 kWweight of the machine ca.: 8,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 350 , 650 , 175
STUDER S30-1 CE – High-precision cylindrical grinding machine | Complete retrofit We offer a STUDER S30-1 CE for high-precision external and internal cylindrical grinding work. The machine has undergone a comprehensive retrofit by MIRA Retrofit, including the revision and renovation of its main components, as well as a careful adjustment and tuning process. The result is a machine that is ready to work, with a high level of precision, reliability and stability, and performance comparable to that of a new machine. Main data: - Distance between points: 650 mm - Height between dots: 175 mm - Grinding: exterior and interior - Status: full retrofit – ready to work Revision and fine-tuning All elements have been carefully checked and adjusted to ensure high geometric accuracy and reliable, stable operation. Photographs of our finished machine. Av ...
Grinding diameter: 600mm, grinding height: 400mm, max. table load: 500kg, length: 2540mm, width: 2130mm, height: 2350mm, weight: 5.2t, with manual, installation instructions and operating instructions, special face grinding program, 1x standard grinding wheel holder 25-100mm for wheel bore Ø127, tools (1x open-end wrench, 1x removal screw). An on-site inspection is possible.
Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible.
used
Weight: 5.400 Kg, Dimensions of the grinding wheel: Ø400 x Ø127 x 100 mm, Height to be rectified: 450 mm, Rectify surface: 1200 x 600 mm, Maximum width to be machined: 600 mm, Maximum length to be rectified: 1.200 mm, Motor power of grinding head: 10 Cv, Useful surface of the work table: 1200 x 550 mm
: neu : ca. 6 Monate ab Auftragse : Taiwan : 197510 €: 3732.94 €: 1010 mm: 590 mm: 1000 x 400 mm: 1000 x 400 mm: 0 -25 m/min: 0 - 4000 mm/min: 0,001 mm: 450 mm: 450 mm: 0 - 3800 mm/min: 0.001 mm: 600 - 3600 1/min: 11 kW: 3675 mm: 4055 mm: 2480 mm: 6500 kg: 423 kg: 670 kg: 405 x 50 x 127 mm: 2,4 / 3,9 kW: 5.9 kW: 0,005 mm: 0,003 mmRigid machine construction with a movable columnfor effective stability to ensure high grinding performance and machining accuracySmart iControlIV control with 15", touchscreen with electronic wired handwheelPC-based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (4 front and 2 rear)All 3 axes with precision ball screws and AC servo mot ...
Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment.
CONTROLS CNC controls FANUC 0I-TFP WORKING RANGE CYLINDRICAL GRINDING swing diameter (max): 350 mm workpiece weight between centers (max): 80 kgWORKING RANGE EXTERNAL GRINDING grinding diameter (max): 350 mm grinding length: 400 mmWORKPIECE SPINDLESTOCK spindle revolutions (max): 1500 /min drive power: 3 kW spindle bore diameter: 30 mm tool fixture: MK 5 c-axis: yes - positioning/indexing: 0.5 °TAILSTOCK distance betw. centers (max): 400 mm sleeve stroke: 60 mm taper: MK 4 SPINDLESTOCK GRINDING SPINDLE X-axis travel: 370 mm Z-axis travel: 500 mm tilting range (B-direction) min: 60 ° drive power: 9 kWGRINDING TOOL diameter (max): 500 mm borehole: diameter: 203.2 mm width: 63 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 8500 kgONLY 1700 operating ...
width of the strips: 75 mmband length: 2000 mmband speed: 34 m/stotal power requirement: 3,0 kWweight of the machine ca.: 75 kgdimensions of the machine ca.: 570 x 570 x 1150 mmFeatures:- Sanding and support table- Hinged protective shield- Machine base- Sanding belt- Emergency stop button- Operators manual (English)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2000 mmband speed: 34 m/stotal power requirement: 3,0 kWweight of the machine ca.: 95 kgdimensions of the machine ca.: 650 x 650 x 1150 mmFeatures:- Sanding and support table- Flip-up protective screen- Machine base- Sanding belt- Emergency stop button- Operators manual (English)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 5200 mmgrinding width: 1000 mmworkpiece height: 320 mmControl: Siemens 840D Passage width: 1300 mmgrinding height: 320 mmgrinding motor: 306 kWgrinding motor turning speeds up to: 320 U/mingrinding motor feed, infinitely variable: 0,5-35 m/mingrinding motor adjustment in steps: 0,002-1 mmgrinding motor adjustment, continuously stepless: bis/upto 5 mm/mindimensions of the machine ca.: 11,21 x 3,2 x 3,85 mCNC production surface grinding machine with segment headEquipment / Accessories:- with segment head, diameter 1400 mm segment head dimensions: 120/106 x 41 x 250 mm number of segments: 1 set = 26 pieces- with electro-magnetic table 5200 x 1300 mm- Marposs measuring control travel (Z1 axis), vertical: 420 mm- coolant flow rate 2000 l/min lifting station 2x pump for 1000 l/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cylindrical grinder FRIEDRICH SCHMALTZ R4/2000.
Manufacturer: HOUFEK Model: SPB 800 MAXX 2 Year: 2024 Condition: Used Stock number: 9516 Max. workpiece height: 0.5 - 160 mm Vacuum belt width: 800 mm Weight: 2100 kg
CONTROLS CNC controls FANUC SERIES 18-M WORKING RANGE -CUBIC- X-axis travel: 500 mm Y-axis travel: 300 mm W-axis travel: 450 mm rotating range C-axis from: 0 ° rotating range C-axis up to: 360 °TABLE table surface (left-right): 600 mm table surface (front-back): 380 mm workpiece load (max): 300 kgELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1800 mm space requirements -front/back-: 2000 mm total height: 3165 mm total weight approx.: 3100 kg
charge load: 125 liter: 1.000 mmtank diameter / tank height: 920 / 480 mm: 210 mmvoltage: 380 Vweight of the machine ca.: 630 kgdimensions of the machine ca.: 1,10 x 1,50 x 1,30 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis KNUTH HFS 30638 C surface grinding machine was manufactured in 2015. It has a weight of 1,960 kg and has operated for approximately 9,200 hours. If you are looking to get high-quality grinding capabilities, consider the KNUTH HFS 30638 C machine we have for sale. Contact us for further details.
