subcategories
(3rd category level)
Manufacturer:
(Category: 107)
MAVIJET MJT-W53D 4020 CNC waterjet cutting machine was built in 2020 in Turkey by MAVİFORM METAL MAKİNA SAN.TİC.LTD.ŞTİ. The machine, equipped with a 5-axis cutting head, offers unlimited machining of a wide range of materials, i.e. metal, plastics and glass. Machining is performed with innovative water jet cutting technology, which guarantees perfectly smooth edges without the need for further finishing operations. During cutting, only natural abrasive and water are used, making the process free of harmful fumes and safe for the environment. The offer also includes a comprehensive range of equipment, consisting of, among others, an advanced control system, a 40 kW high-pressure pump and an abrasive tank. MJT-W53D 4020 WaterJet with empty tank weighs 4560 kg. Technical specifications of the MAVIJET MJT-W53D 4020 water cutting machine - CNC controller: ESA - number of axes: 5 ...
sheet width: 3020 mmplate thickness: 2.0 mmbending angle max.: 135 °stroke of upper beam: 250 mmAdjustment folding beam: 25.0 mmwork height max.: 935 mmcontrol: SCHRÖDER NC total power requirement: 6.0 kWweight of the machine ca.: 3350 kg.dimensions of the machine ca.: 4250 x 2300 x 1900 mm- in checked conditions - machinevideo -https://www.youtube.com/watch?v=kyDHkc9opN4Features:- Dynamic, powerful motorized folding machine- Used SCHRÖDER NC control unit with LCD display Manual, setup, and automatic operation Fast programming of individual parts Pivoting control panel, right front- NC electro-motorized backgauge with rear sheet support surface- Manual lower beam adjustment- 1x freely movable double foot switch- 1x bending tool set- 2x emergency stop buttons at the front- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...
pressure: 135 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 200 mm/secwork speed: 12.0 mm/secreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 15.0 kWweight: 10800 kgrange L-W-H: 5100 x 2100 x 2850 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A- with additional cro ...
sheet width: 3060 mmplate thickness: 8.0 mmthickness at Niro-steel: 6.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...
pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 185 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 160 mmback stop - adjustable: max. 800 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 14000 kgrange L-W-H: 5150 x 2250 x 3000 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot ...
sheet width: 4100 mmplate thickness: 8,0 mm STpre-bending: 6,0 mm STdiameter of upper rolls: 300 mmside roll diameter: 210 mmdiameter of lower rolls: 270 mmtotal power requirement: 7,5 kWweight of the machine ca.: 9.930 kg.dimensions of the machine ca.: 6532 x 1730 x 1489 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution ...
sheet width: 2600 mmplate thickness: 10,0 mmpre-bending: 8,0 mmdiameter of upper rolls: 230 mmside roll diameter: 190 mmdiameter of lower rolls: 210 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5.560 kg.range L-W-H: 4.650x1.380x1.300 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter of brush: Ø 250 mmwidth of brush: 40.0 mmturning speed range: 2850 U/minvoltage: 400 Volttotal power requirement: 1.3 / 1.8 kWweight of the machine ca.: 36.0 kgdimensions of the machine ca.: 415 x 467 x 356 mmEquipment:- Deburring of individual pieces and small series- Deburring of stretched round, rectangular and square tubes + flat material- Heavy, durable industrial design- with maintenance-free motor- long service life and very smooth running thanks to balanced rotor- with quality ball bearings- storage area for safety glasses- incl. 1x multi-purpose wire brush, wire thickness 0.35 mm- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 225 tchamfer lenght: 3050 mmdistance between columns: 2550 mmcolumn arm: 300 mmajustment speed: 110 mm/secwork speed: 9.0 mm/secreturn speed: 130 mm/secwork stroke: 240 mmdayligth: 320 - 560 mmtable height: 1000 mmtable width: 200 mmoil volume: 350 ltr.operating pressure: max. 296 barair pressure: 4.5 - 6.0 barvoltage: 400 Volttotal power requirement: 18.5 kWweight: 14900 kgrange L-W-H: 5180 x 2400 x 3100 mm- in checked condition - machine video -https://www.youtube.com/watch?v=ebbbzSYMxKwFurnishing:- electro-hydraulic CNC die bending/press brake- CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library- CNC-controlled back gauge adjustment (X-axis) Stop range X axis of bending line .. ...
table length: 4000 mmtable width: 2000 mmburner heads: Precitec Procutterx-axis: 4050 mmz-axis: 150 mmy-axis: 2050 mmtotal power requirement: 18,0 kWweight of the machine ca.: 18.150 kgdimensions of the machine ca.: 12430 X 5664 X 2310 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 220 tchamfer lenght: 3760 mmdistance between columns: 3250 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 160 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 160 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 12906 kgrange L-W-H: 5100 x 2250 x 2900 mm-------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA 58T (TouchScreen)- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 stop fingers- controlled axes Y1 - Y2 - X - R - C (crowning)- electr. Crowning controlled by CNC- Upper deer foot tool with PS 135.85-R08, system A with quic ...
pressure: 320 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 140 mm/secwork speed: 10.5 mm/secreturn speed: 150 mm/secwork stroke: 375 mmdayligth: 650 mmtable height: 900 mmtable width: 240 mmoil volume: 400 ltr.voltage: 400 Volttotal power requirement: 30.0 kWweight: 17082 kgDimensions (HxWxD): 4550 x 2450 x 3200 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, Sys ...
pressure: 40.0 tchamfer lenght: 1270 mmdistance between columns: 1050 mmcolumn arm: 350 mmdayligth: 387 mmwork stroke: 170 mmtable height: 850 mmback stop - adjustable: 800 mmadjustment speed: 230 mm/minajustment speed: 140 mm/secworking feed: 10.0 mm/secreturn speed: 170 mm/sectotal power requirement: 5.5 kWweight of the machine ca.: 3220 kgdimensions of the machine ca.: 2150 x 1650 x 2300 mm--------------------------------------------------Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds--------------------------------------------------Furnishing:- DELEM CNC control model DA 58T (TouchScreen)- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 stop fingers- controlled axes Y1 - Y2 - X - R - C (crowning)- electr. Crowning controlled by CNC- Upper deer foot tool w ...
pressure: 160 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 90.0 mm/secwork speed: 7.5 mm/secreturn speed: 80.0 mm/secwork stroke: 160 mmdayligth: 395 mmtable height: 900 mmback stop - adjustable: max. 800 mmoil volume: 200 ltr.voltage: 400 Volttotal power requirement: 11.0 kWweight: 7524 kgrange L-W-H: 4250 x 1900 x 2550 mmFurnishing:- DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface intuitive, graphical entry of profiles Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation Radius programming Graphic tool and product library Collision monitoring 3D visualization 1 ...
pressure: 80.0 tchamfer lenght: 2600 mmdistance between columns: 2200 mmcolumn arm: 250 mmram stroke speed: 90.0 mm/secwork speed: 7.5 mm/minreturn speed: 60.0 mm/secwork stroke: 160 mmdayligth: 380 mmtable height: 900 mmoil volume: 150 ltr.voltage: 400 Voltweight: 5227 kgrange L-W-H: 3750 x 1950 x 2400 mmFurnishing:- DELEM - CNC control model DA-58T- controlled axes: Y1 - Y2 and X- AKAS laser in front of the machine- manual crowning- Upper tool, deer foot- Lower tool, die block with 4Vs- SICK light barrier behind the machine- 2 front support arms- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- CE mark / declaration of conformity- Operating manual: machine and control- Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 tchamfer lenght: 3760 mmdistance between columns: 3250 mmcolumn arm: 250 mmram stroke speed: 90.0 mm/secwork speed: 7.5 mm/minreturn speed: 80.0 mm/secwork stroke: 160 mmdayligth: 395 mmtable height: 900 mmoil volume: 200 ltr.voltage: 400 Voltweight: 8514 kgrange L-W-H: 4910 x 1900 x 2550 mmFurnishing:- DELEM - CNC control model DA-58T- controlled axes: Y1 - Y2 and X- SICK light barrier in front of the machine- Upper tool, deer foot- Lower tool, die block with 4Vs- manual table crowning- SICK light barrier behind the machine- 2 front support arms- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- CE mark / declaration of conformity- Operating manual: machine and control- Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 85.0 tchamfer lenght: 2050 mmdistance between columns: 1750 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/secback stop - adjustable: max. 600 mmtable width: 120 mmwork height max.: 1050 mmNumber of working hours: 28.500 hoil volume: 200 loperating pressure: 340 bartotal power requirement: 14.0 kVAweight of the machine ca.: 9050 kgrange L-W-H: 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition () with only approx. 28.500 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=ZuwyPKJSYLwEquipment:- CNC electro-hydraulic press brake- including DELEM CNC control swiveling control panel at the front left- CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning- CNC electro-motorized back stop (X axis)- CNC e ...
pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 135 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 90.0 mmoil volume: 200 ltr.voltage: 400 Volttotal power requirement: 15.0 kWweight: 9450 kgrange L-W-H: 4250 x 2150 x 2800 mm--------------------------------------------------Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-58T graphic/touch screen 2D graphical programming 15 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface- Motorized backgauge with R-axis, on ball screws- X = 800 mm R = 250 mm with 2 stop fingers- co ...
bending diam. - max.: 36.0 mm STcutting thickness max.: 36.0 mm STmotor: 1450 U/minoil volume: 32.0 lmotor: 380 Volt 50 Hztotal power requirement: 5.5 kWweight: 650 kgrange L-W-H: 1470 x 1200 x 1020 mm Exhibition machine - NEW ()Equipment:- Maximum performance, minimum consumption- hydraulic combination machine for bending and cutting processes for e.g. structural steel or solid material- Bending mode with 3x different angle settings- manual and automatic mode selectable- simultaneous bending and cutting processes when the machine is in operation- ECO mode = hydraulic pump only runs when the foot switch is pressed- freely movable foot switch- operating instructionstechnical data:- steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm- steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm for 2 p ...
table length: 3000 mmtable width: 1500 mmlaser capacity in Watt: 4.000 Wattx-axis: 3050 mmz-axis: 150 mmy-axis: 1550 mmburner heads: Precitec HPSSLtotal power requirement: 22,0 kWweight of the machine ca.: 14.200 kgrange L-W-H: 10.360 x 5.110 x 2.310 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mmplate thickness: 8,0 mm STpre-bending: 6,0 mm STdiameter of upper rolls: 190 mmside roll diameter: 150 mmdiameter of lower rolls: 170 mmtotal power requirement: 3,0 kWweight of the machine ca.: 3.290 kg.dimensions of the machine ca.: 4042 x 1380 x 1254 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution ...
pressure: 60,0 tsquare edge steel: 35,0 mmround bar steel: 40,0 mmL-beam: 120x120x12 mmpunching cross-cut in cmm: Ø28 in 15 / Ø38 in 11 mmthroat: 220 mmflat steel: 200x20 / 300x15 mmblade length: 317 mmoil volume: 45,0 ltr.work height max.: 940 / 1140 mmstrokes per minute: max. 26 work stroke: 55,0 mmtotal power requirement: 4,0 kWweight of the machine ca.: 1425 kg.Dimensions (HxWxD): 1510 x 590 x 1570 mmFurnishing:- Support table at the hole punch- Support table on the square notcher- foot switch- Bed. Instructions- CE declaration+ MUBEA - punch and die holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1600 mmplate thickness: 15,0 mm STpre-bending: 13,0 mm STdiameter of upper rolls: 230 mmside roll diameter: 210 mmdiameter of lower rolls: 190 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4225 kg.dimensions of the machine ca.: 4000 x 1300 x 1440 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution ...
weight max.: 5000 kgtable turning speeds: 6 - 60 m/hroll diameter: 250 x 120 mmworkpiece diameter: 250 - 2.800 mmweight: 300 kgrange L-W-H: 0 mm Antriebrange L-W-H: 0 mm Mitläufertotal power requirement: 0,75 kWStable turningThe HGK_Series has two synchronously working drive units that are used forensure continuous rotation with stepless speed control. Of the Roller spacing can be increased and decreased manually using locking pins to achieve a large diameter range of the workpieces.Characteristics:- For rotating and positioning- in the field of machine, container, plant and pipeline construction- Two synchronously running drive motors- Adjustable rotation speed.- PU castors- Adjustment is via bolts- Remote controlScope of delivery:- 1x controller- 1x driven unit- 1x traveling unitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdown holder: 14 Stückno. of strokes: 20 Hub/mincutting angle: 1,2 °control: CYBELEC CybTouchwork height max.: 800 mmoil volume: 150 ltr.total power requirement: 11,0 kWweight: 5500 kgrange L-W-H: 4.000 x 2.410 x 1.640 mm-------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------Furnishing: - CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for longer cuts- ...
sheet width: 2600 mmplate thickness: 8,0 mmthickness at Niro-steel: 5,0 mmdown holder: 12 Stückno. of strokes: 18 Hub/minoil volume: 200 ltr.cutting angle: 1,5 °engine output: 15,0 kWweight of the machine ca.: 6.300 kgrange L-W-H: 3525 x 2350 x 1700 mm-------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------Furnishing: - CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for longer cuts- 1x side stop- 2x front support arms- Ball ...
punching pressure: 28.0 tpunching cross-cut in cmm: 31 in 7.0 mm STthroat: 250 mmdayligth: 223 mmno. of strokes: 10 - 30 Hub/minoil volume: 32.0 ltr.work height max.: 1033 mmtotal power requirement: 3.0 kWweight of the machine ca.: 553 kgdimensions of the machine ca.: 730 x 540 x 1530 mFurnishing:- Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm- Free: LED lighting in the punching area- Swiveling scraper (plates exchangeable)- Various material support tables are available separately- Brace- 2-step foot switch, with double press for grain search function- electrical controls- Stroke length and stroke position continuously adjustable- integrated hydraulic unit with oil filling- Performance specifications apply to a material strength of 450 N/mm²- Main connection cable and plug for 16 amps are not included in ...
sheet width: 3100 mmplate thickness: 13,0 mmpre-bending: 10,0 mmdiameter of upper rolls: 300 mmside roll diameter: 210 mmdiameter of lower rolls: 270 mmtotal power requirement: 11,0 kWFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 10.0 - 60.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 64.0 mm CU/Aluwall strength: 4.0 mmrevolutions per minute: 1.25 - 2.50 U/minbar material - diameter: 35.0 mmvoltage: 400 VoltControl: ISITAN NC total power requirement: 2.0 kWweight: 140 kgrange L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request- Steel tube capacity: 60.0 x 3.0 mm- Gas tube capacity: 2 Gas x 3.91 mm- Square profile capacity (FE 42) 60 x 30 x 4.0 mm- Max. bending radius: 200 mm- Minimum radius: 2 x D- Hexagonal tool holder- Min. outer diameter: 5 mm - 1/8 GasEquipment:- ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each- Patented quick tool change system- Continuously adjustable bending speed- One bending speed- 1 free-floating foot switch- 1 bending tool set included Additional segments available upon reque ...
tube diameter: 10.0 - 42.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 54.0 mm CU/Aluwall strength: 2.0 mmbar material - diameter: 30.0 mmrevolutions per minute: 1.30 U/minvoltage: 400 Volttotal power requirement: 1.5 kWweight: 110 kgrange L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request- Steel tube capacity: 42.0 x 3.56 mm- Gas tube capacity: 1 1/4 Gas x 3.5 mm- Square profile capacity (FE 42) 40 x 20 x 2.6 mm- Max. bending radius: 200 mm- Minimum radius: 2 x D- Hexagonal tool holder- Min. outer diameter: 5 mm - 1/8 GasFeatures:- Patented quick tool change system- One bending speed- Digital machine display- 1x freely movable foot switch- 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holderThe data for this ad was created with ModulMWS - the software solution of Log ...
MASZYNERIA SP. Z O.O.
