Spotting Press Fabr. GUSTAV HESSMERT Type TSD 40Masch. -No: 125/85 built in 1985Pressing and clamping pressure: 20 - 400 kNRetraction pressure: 100 kNDischarge pressure: 5 - 40 kNOperating pressure: 200 barClosing speed: 0 - 17 mm / sec.Opening speed: 0 - 37 mm / sec.Press speed: 0 - 4.0 mm / sec.Usable table surface: 600 x 600 mmInstallation height: 600 mmRam stroke: 300 mmAustoßerhub: 150 mmDisplacement weight: 600 kgSwivel and rotary weight: 300 kgSwivel and rotation angle: 180 degr.Operating pressure: 250 barConnected load: 380/220 V, 4.0 kWWeight approx: 2,3 tWith- swivel head above- T-slot table 0.6 x 0.6 m- in 2015 renewal of the PLC control Siemens,xa0xa0 with new program recording and network connectionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors e ...
Hydraulic tool test press and small series press, Nominal Force: 400to, Stroke: 600mm , Table surface/ ram surface: 2500 x 1500mm 4200 operating hours, weight: 32to. To be visited under electricity.
Spotting- and test injection press make REIS type TUS 60 AMachine -No: 791, built in 1974Max. Mold area: 600 x 1000 mmMax. Mold height: 727 mmMax. Mold weight: 2500 kgEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Load capacity of the upper swing-out plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmColumn diameter: 80 mmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H approx.: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Control panel- Test sprayer- Heater- ejectorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.W ...
Tuschier- and test injection press make REIS type TUS 60 A 10 HMachine -No: 177/66, built in 1966Table surface: 590 x 600 mmMax. Shaped area: 600 x 1200 mmMax. Mold height: 680 mmMax. Mold weight: 2.5 tStroke of the table: 500 mmEjector stroke: 200 mmEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 0 - 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Stroke speed stepless: 0 - 80 mm / sLoad capacity of the upper swivel plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Test sprayer- Heater- ejector- swivel top plate m. hydr. locklittle usedPrice on request.Delivery: ex warehouse or location free loading tr ...
Spotting Press Fabr. REIS Type TUS 60 OK-40 HWMasch. -No: 693/73 built in 1973Press force: 40 tTable or size of the ram surface: 670 x 470 mmPassage between columns wide / long side: 620/470 mmgr. distance between clamping surface and plunger: 740 mmRam stroke: 770 mmPress speed: 20 mm / sRapid traverse: 50 mm / sOpening speed: 34 mm / sEjector force: 3 tEjector stroke: 200 mmHydraulic drive: 380 V, 9.5 kWSpace required including space for aussfahrb. Table and pestles: 2200 x 1875 x 3000 mmWeight approx: 2400 kgWith- compl. electrical device- Control panel for the electrical system and hydraulics- Test sprayerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regards ...
Spotting and test spray press make REIS type TUS 60 / 0K 20Machine -No: 19137/79 Year 1979Technical specifications:Press force: 20 tRetraction force: 10 tgr. stroke: 775 mmEjector force: 3.0 tEjector travel: 200 mmOperating pressure: 175 barTable mounting surface: 570 x 670 mmDistance between columns: 620/470 mmInstallation height: 740 mmPiston diameter: 120 mmDrive power: 7.5 kWtotal installed power: 9.5 kWDimensions L x W x H: 1900 x 1200 x 3100 mmWeight approx: 2300 kgWith- Test spray device- 2 hydr. sockets- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
