other metal working machines used for sale (11,699)

Control: Siemens Acramatic A2100 Di Speed: 8,000 rpm Travel in X/Y/Z: 510/510/510 mm Spindle: Technology: Belt spindle Speed: 8,000 rpm Power (max.): 9 kW Tool holder: SK40 Workbench: Clamping area: 700 x 520 mm Table load (max.): 500 kg General: Tool magazine: 21 stations Rapid traverse in X/Y/Z: 24/24/24 m/min Equipment/accessories: Chip management: chip tray Coolant management: IKZ pump with filter and high pressure Tool Measurement: Pushbutton, Renishaw TS27R Setup operation: Electronic handwheel Other equipment: Div. gebr. Tool holder and machine vices (2x Allmatic HD 125), rinsing gun

1 phase 220v ± 15%; frequency 50/60Hz; rated input current 25.5A; Output Current Adjustment 10-130 A; output voltage 20.4-25.2 V; open circuit voltage 56V; duty cycle 25%; power factor0.73; efficiency 80%; insulation grade F; Home Protection Degree IP21S; weight 2 KG; Dimensions 235x106x186mm

SICK WT34-V210 Photoelectric sensor , 1 019 280 / 1430 , Made in Germany

consisting of two piecesof panel dimensions: 1250 x 750 x 60 mm

grinding diameter:630 mmgrinding length:5000 mmcentre height:315 mmgrinding wheel diameter x bore x width:750x80x305 mmgrinding wheel peripheral speeds::35 m/secgrinding wheel speeds:500-1100 U/minmax. workpiece weight:3000 kgweight of the machine ca.:17900 kgmachine length:im Betrieb: ca. 15m

Crate included

With tool trolley

Operation unknown. Needs some attention with the electricity connection. This lot consists of 2 parts, size of part 1 with motor: LxWxH 3350mm x 1000mm x 750mm; dimension of part 2 without motor: LxWxH 2400mm x 600mm x 750mm

Extension: 760 mm; Includes cabinet with various tools

SICK Optex VT 180-N410 Optic Electronic, 6 008 790 , 0426S 12563 , Made in Japan

UTP 301 – Electric Welding Machine (up to 300 A) Technical data (according to nameplate): • Model / Type: UTP 301 / ISO 700 • Serial number: 081196 • Welding range: 10 – 300 A • Open circuit voltage (U₀): 63 V • ED at 300 A: 35% • ED at 229 A: 60% • ED at 177 A: 100% • Output voltage U₂: 32 V / 29 V / 27 V • Protection class: IP 23 • Input (mains connection): 3~ / 50–60 Hz • Mains voltage: 220 V / 380 V / 440 V / 500 V • Connected current (at 380 V): 25 A (rated current) • Cooling: Convection cooling Equipment: • Stepless current regulation via rotary control (scale up to 300 A) • Terminals for electrode holders and ground cables • Integrated chassis with pull handles • Electrode holder and ground cable included (used, see pictures) • Integrated 24 V connection (e.g. for accessories, fans) Condition: • Used, functional ...

with drawer cabinet and various tools

including saw blades and resistors, on 1 pallet

From 180 to 360cm

With case

on 4 pallets

Including 3x metal frame with various rollers with AFM approximately 170 x 105cm, complete with metal frame conveyor belt with gears and control box. Lying on 2 pallets.

Unused black steel

machine is defective

Magnetic force 300 Kg - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 250 x 130 mm; Approx. Weight: 9kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance.

VEGA VEGAPLUS 69 , PS69. AXCSAAHXKMXXX ,IP66/67,Order 2522404/002 Made in Germany

A total of 50 pieces in different designs, for more details see photos of the nameplates;

Inventory number: 45725 -Working width approx. 2500 mm

SICK WT27-2F112 Sensor , SENSICK P , 1015076 , Made in Germany

including various rocker clamps in box; including roll of welding wire Lincoln SupraMig 0.8 mm;

Investment number: 45726 Reference number: 790110 Total power requirement: 16Kw , Maximum table load 300KG Table size: 1540x600 mm