used Furnaces for sale

Oven 700 1.3x1.3x1.5m Auto door PLC top quality Giessereianlagen Giessereimaschine Giessereimaschinenbau Giessereitechnik Giessereizubehör Glasschmelzöfen H aubenöfen Herdwagenöfen Hochtemperaturöfen Induktionsanlagen Industrieöfen Industrieofenanlagen Industrieofenbau Kammeröfen Keramikbrennöfen Kippofen Kupolöfen Laboratorien Laboröfen Lötofen Maschinen Muffelöfen Nachverbrennungsanlagen Öfen Ofenanlagen Ofenbau Ofenbauzubehör Prozessanlagen Prozesssteuerungssysteme Pyr lyse Pyrolyseöfen Regelungstechnik Retortenka meröfen Retortenofen Rohrofen Salzbadöfen Schmelzofen Sinteröfen Thermoprozessanlage Thermoprozesstechnik Vakuumglühofen Vakuumkamme fen Veraschungsöfen Versuchsofen Vorwärmofen Wachsausschmelzverfahren Wannenofen Wärmebehandlung Wärmebehandlungsöfen Wärmebehandlungsverfahren Wärmerückgewinnungsanlagen Warmhalteofen Poreba Gur ...

Continuous tempering furnace plant, make Aichelin consisting of: - material charge (belt) - hardening furnace (HTO) - quenching bath - washing machine - tempering furnace (NTO) with link chain belt required space: W=4,5 m, H= 4,0 m, L=31 m line length heated length: 6500mm conveyor belt width: 1000 mm electrical connection value: 160 kVA total heating capacity: 500 kW over 40 Noxmat Recu-burner throughput: max. 650 kg/h protective gas: methanol

Key data: 1180 °C

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

Bejbl convection oven 12kW convection fan 900 m³/h The furnace was designed for heating/heating components Year of construction 2016, S/N 2422; with convection fan Haprovent-M S DV 300 (900 m³/h, 1,650 Pa) Motor (230/400 V, 0.5 kW, 1,435 rpm) Air heater LE-R 112 (400 V, 12 kW) More items - new and used - can be found in our shop! International shipping costs on request!

bogie furnace 1x1x2m Temperature max 1200C PLC Data monitoring good quality Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken- und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gil ...

Cieffe FNCm 2.5/0.8/1500 Hardening furnace Chamber furnace 1120 °C Manafacture: Cieffe Type: FNCm 2.5/0.8/1500 Max temperature: 1120 °C Series: 4185/1B Rated Current: 70A 37 kVA 400 volts Year: 2000 More items - new and used - can be found in our shop! International shipping costs on request!

Fully automatic hardening line consists of: 1x hardening furnace with salt bath LLF-8/G/X-S (gas-heated) 2x tempering furnace FVF-8/E/X-R (electrical heated) 1x tempering furnace FVF-8-G/X (gas-heated) 1x washing machine WCF-8/X/3/E-R (electrical heated) 1x fine filter for wasing machine 1x desalination plant DS-80/E for washing machine 1x salt transfer container (salt storage for hardening furnace) 1x magazine with loader and unloader 1x transport roller conveyor 2x lift table (charge and discharge) 1x extractor hood over the entire length of the driveway 1x cooling place

Double chamber furnace, make Cieffe The furnace consists of: - 1 nitriding chamber with an operating pressure of 0.5 bar, - 1 quenching chamber with an operating pressure of 15 bar, - 2 cooling chambers, each equipped with an air/water heat exchanger, with a working pressure of 15 bar. The cooling chambers are installed above the quench chamber. The nitriding chamber and the quenching chamber are separated from each other by two sealed doors. type: NCV refurbished year: 2003 connected load: 436 kVA charge weight: max. 2,500 kg usable dimensions (W x H x D): 910 x 800 x 1300 mm type of heating: open flame gas burner heating areas: 2 heat output: 235 kW operating temp.: max. 700°C vacuum: 2.5 x 10-2 mbar pump capacity: 250 m3 / h quench pressure: 15 bar cooling gas: N2 / 190 m3 / h

usable dimensions width: 700 mm height: 650 mm depth: 1100 mm rated voltage: 3/400 V, 50 Hz control voltage: 220 V AC 24 V DC total power: 250 KVA temperature under vacuum: 600 - 1350 C heating: rated power: 200 kW heating conductor: graphite pumping rate: booster pump: 250 m3/h roots pump: 2050 m3/h oil quenching: bath volume: approx. 5,0 m3

3 EMOD electric motors are for sale for Degussa chamber furnaces type GKU ... 2 type 132S / 6 unused with the following performance parameters: Power: 2.2 KW Speed: 970 Flange: d = 250mm Protection class: IP 54 1 pc.type 132S / 4 unused with the following performance parameters: Power: 4 KW Speed: 1.430 Flange: d = 250mm Protection class: IP 54 Sold without warranty or guarantee!

FRANCE ETUVES XXL01 industrial furnace was manufactured in 2013. The furnace used in curing, polymerisation, coating, heating and drying of workpieces has a structure made of high quality steel with a 1000 litre capacity utility chamber. A large opening door allows for quick and easy loading of workpieces without weight limit into the chamber. The air from the top of the furnace is drawn in, heated to 200°C and blown out from the rear of the chamber onto the workpieces via an efficient ventilation system. All of the furnace’s heating elements are ideally positioned in the airflow, guaranteeing fast and efficient heating. In the case of a malfunction, the fan and the heating process are automatically stopped. The machine is equipped with a PID control C3000 with functions such as real-time temperature display, start delay and cycle repeat. The total weight of the furnace is 500 kg.  ...

High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

High temperature furnace, make GERO type: ULO 40/10- 2G heating: electrical useable space: ø400 x 600 mm temperature: max. 1.000°C room conditions: ventilation / exhaustion voltage: 400V connected load: 25 kVA control: MODCON with Modvis 2000

We offer two chamber furnaces of type 1 G1101 from Glasbeek Finish BV. Burner: 2. Heating medium: natural gas. Heating capacity: 200kW to 450°C. Footprint: 3400x2400.

We offer the EFU 60/60 air circulation furnace of the Heraeus brand. Application temperature 500 °C, usable dimensions: 600x600x600.

Hardening furnace Specifications: - Nominal temperature / continuous temperature up to 1150 ° - Temperature infinitely adjustable - Temperature display - Drive 400 V / 8 kW - Interior dimensions approx. W 260 x H 160 x D 500 mm - Usable space 0.02 m³ - Space requirement approx. W 700 x H 1400 x D 900 mm - Weight approx. 140 kg

degree: 650 working heigth: 250 mmlength: 250 mmwidth: 250 mmdepth: 450 mmtotal power requirement: 8 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 250 °cwidth: . mmheight: mmdepth: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Heraeus Type: TUo Year of construction: 1967 Power: 5.5 kW Temperature: 250 °C Dimensions: 600 x 600 x 550 mm

Key data: 250 , 1500 , 3000

New device with new machines Warranty -Temperature 250°C -Inside BxDxH 1500 x 3000 x 2000 mm -Outside BxDxH 2410 x 3560 x 2730 mm -Content 9000 litres -Control Omron E5CC (target actual value controller) -Time timer Galaxy -Overtemperature protection Omron K8 Relay -Entry lanes -2 pcs circulating air fans -Exhaust air and supply air flap manually adjustable -Safety door switch -Power 43 KW -Connection 400 V , 3 phased -not suitable for solvent-containing substances -Temperature accuracy +/- 5°C -incl. documentation, CE declaration We are happy to offer installation and commissioning.

salt bath hardening system, make: IOB almost unused with charging dimensions 800 Ø x 1200 mm heating type: gas/electric consisting of: 2 loading places 3 electrical heated pre-reheating furnaces 500°C 4 gas heated crucible furnaces 900°C 1 electrical heated thermal bath 450°C 1 electrical heated washing tank (3-fold) 1 air cooling tank 1 water drainer 2 unloading places 1 el. measuring, regulating and control system 1 evaporator 1 intermediate storage tank 1 suction 1 chimney various accessories condition good requird space: approx. 12 x 20 m

Heated surfacefinishing machine for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

UV2 furnace, model QSTS_3D-1000_2011001. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Kuhnast UV4 furnace, model QSTS_3D-550_2017001, SN: 2017001. In good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,5 ...

Kuhnast UV6 furnace, model QSTS_3D-550_2017003, SN: 2017003. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (pai ...

Kuhnast UV1 furnace, model QSTS_3D_V1_2012006, SN: 2012006. Good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,0 ...

TECHNICAL DATA This furnace system is for recrystallization, normalization, soft annealing, stress relief, annealing and conditionally suitable for soldering. belt width: 1000 mm working height: 300 mm (over belt) heated length: 4250 mm electrical heating power: 300 kW heating zones: 4 heating temperature: 900 – 1120°C belt speed: 6 – 60 m/h (continuously adjustable) nominal connected load: 310 kW natural gas consumption: 50 Nm3/h natural gas pressure: 30 – 50 mbar nitrogen consumption: 70 Nm3/h – on purging nitrogen pressure: 100 mbar emergency cooling water pressure: 4-6 bar furnace length: 25298 mm furnace width: 2200 mm furnace height: 2800 mm exhaust gas quantity: 1200 m3 / h

Inv. Num. : 5013 Type: DLE 650/220/3000 G Producer: Mahler Created: 2007 Parameters: Belt width: 650 mm Free height above belt: 220 mm Gross continuous power including belt: 500 kg-hod Belt conveyor control range: 50-500 mm Upper limit temperature: 1120 C Operating temperature: 800-1120 C Electric heating capacity: 125 kW Total current: 130 kW Effective length of the furnace (heated): 3000 mm Furnace length: 19500 mm Furnace width: 2000 mm Furnace height: 2600 mm Weight: 12 t Equipment: Technical Documentation The stove is electrically heated.

Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 yom: 2010 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

A functional oven is sold Temperature range 0-220°C 1500W power 220V connection Dimensions outside 520475685mm Dimensions of the interior 375375330mm (measured between the slots)

Tunnel Type Annealing Furnace Mioba Mfg: Mioba Year of Mfg. 2008 Temperature 450 – 950 C Fuel: Natural Gas 15 Zones with a total of 144 Burners Plate thickness 3-120 mm Plate width 700 – 3.800 mm Plate length 16.500 mm Max Plate with thickness of 40 mm: 3200 x 12.000 mm Max Plate with thickness of 8 mm: 2500 x 10.000 mm Special roll load 2.260 kg/M 7 Conveyor Roll Sections; total 177 centrifugal casted rolls Speed 0,25 – 25 M/Min. Furnace Length 80 Meter; inside width 3900 mm

Key data: 260 mm, 1900 , 1430

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available With safety system for solvent-based substances according to DIN 1539 -Inside w x d x h 1000 x 1000 x 1500mm -Outside w x d x h 1900 x 1430 x 2315 mm -Capacity 1500 liters -Tmax 260°C -Controller P570/ 50 programs each 40 segments freely programmable -NtLog for controller recording the data via USB stick -Air circulation 3600 m³/h -Exhaust gas volume min. 390m³/h -Additional equipment: drive-in rails -Connected load 39 KW -Weight 1150 kg -incl. documentation, CE declaration We are happy to offer installation and commissioning. Viewing in our warehouse by appointment.

Key data: 260 mm, 1250 , 1250

We constantly have new and used convection chamber furnaces on offer. Give us a call! Convection chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and drive-in channels and exhaust fan Demo unit, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs each 20 segments freely programmable -NtLog for controller recording the data via USB stick -Temp. uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air flow rate 125m³/h -Auxiliary: Controlled cooling (exhaust fan) Entry rails Bushing 40 mm -Connected load 27 KW -Weight 1800 kg -not suitable for solvent-based substances -incl. documentation, CE declaration We ...

Key data: 260 , 1250 , 1250

Circulating air chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and run-inchins Demonstration device, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs per 20 segments freely programmable -NtLog for controller Record data via USB stick -Temp. Uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air volume flow 125m³/h -Additional equipment: Motor-closing fresh air and exhaust air flaps Entry rails -Connection power 31.2 KW -Net weight 1800 kg -not suitable for solvent-based substances -incl. documentation, CE declaration We are happy to offer installation and commissioning.

Debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 Process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. ball valve - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor.

Chamber furnace Manufacturer: Nabertherm Model: N161 Year of construction: 2000 temperature 1200 C kW: 30 A: 43.4 Hz: 50 V: 400 N: 3 Combustion chamber dimensions: approx. 54 x 40 x 85 cm Overall size oven: approx. 120 x 170 x 200 cm Weight approx. 950 kg verm. 6,955 operating hours Control: Controller C 40 An instruction manual is available for the control

Key data: 850 mm

We always have convection chamber furnaces on offer. Give us a call! it 12 months warranty, from 2023, original packaging, in stock -500 liters -Max temperature: 850°C -with controller P570 ( 50 programs with 40 segments each ) - Process documentation on the customer's USB stick -Furnace chamber: W x D x H 750 x 1000 x 750 mm -Temp. uniformity +/- 5 °C according to DIN 17052-1 in the empty furnace room -Max 125 kg charging weight opt. Tray (not included) -Connected load approx. 28 KW -not suitable for solvent-based substances - Documentation, CE declaration Auxiliary: Controlled cooling (exhaust fan) Viewing in our warehouse by appointment. We stock new and used industrial furnaces. Get in touch with us!

Key data: 450 , 450 , 600

Convection chamber furnace electr. 450°C with supply and exhaust air system motorized Demonstration device, unused, 24 months warranty -Temperature max.; 450 °C -Volume of oven space: 120 liters -Outside: 1200 x 1470 x 1575 mm(W x D x H) -Oven space: 450 x 600 x 450 mm (W x D x H) -Controller C440, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: motor-driven supply and exhaust air system -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: max 10 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3Ph/PE 50 Hz, without RCD Documentation Visit in our warehouse by appointment.

Key data: 650 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 650°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 650 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 13 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3/PE 50 Hz, without RCD -Documentation Viewing in our warehouse by appointment.

Key data: 850 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 850°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 850 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: -Motor-controlled supply and exhaust air flaps -Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 12-13-14 KW (according to connection voltage) -Fan capacity : approx. 500 m³/h -Connection: 380- 400- 415V 3/PE 50 Hz, without RCD circuit breaker -Documentation Viewing in our warehouse by appointment.

Key data: 450 mm

We always have convection chamber furnaces on offer. Give us a call! Very good condition, 12 months warranty -free-standing, on base -Temperature max.: 450 °C -Volume of furnace chamber: 250 liters -Exterior: 1002+225 x 1636 x 1860 mm(W x D x H) -Furnace chamber: 600 x 750 x 600 mm (W x D x H) -Controller C280, 9 programs each with 4 segments -Temperature uniformity: ± 6°C according to DIN 17052-1 -strong air circulation, air guide box for optimal air flow -Supply and exhaust air flap manual -Connection flange for supply air fan under furnace -Permissible batch weight: 125 kg with distributed load per rack -1 bottom plate incl. -2 slide-in plates additionally available on request -Connected load: max 13 KW -3phase -Documentation -Weight 610 kg Viewing in our warehouse by appointment.

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

Key data: 300 mm, 1200 , 670

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available -Model with wheels -Temperature max.: 300 °C -Volume furnace chamber: 1050 liters -Exterior: 1470 x 970 x 1920 mm (W x D x H) -Furnace chamber: 1200 x 670 x 1400 mm (W x D x H) -Controller C550, 10 programs each 20 steps Controller has Wi-Fi and app as standard -Horizontal, forced air circulation results in a Temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with the exhaust air flap closed) -Permissible batch weight: 250 kg with distributed load -Gratings included: 4 pcs -Max number of gratings 14 pcs -Additional equipment: bushing for thermocouples I-Ø 44 mm -Connected load: max 9.3 KW -Fan capacity : approx. 500 m³/h -Connection: 380-415V 3/N/PE 50 Hz -Net weight : 450 kg - Documentation, CE declaratio ...

K240/12 nabertherm . Foundry machines Nabertherm Kippofen 600kg Aluminium Nabertherm Kippofen 600kg Aluminium Balzer Kippofen 600kg Aluminium Balzer Schöpfofen 300kg Aluminium Fulmina Wannenkippofen 20 to Zamak/Zink Reißaus Durchlaufmischer 4-8 to Furansand AXA Fräsmaschine 2300x1190x600 Silo Ø 2500x5000 Sand

CHARACTERISTICS HEAT TREATMENT EQUIPMENT  heating method: electric   temperature min.: 420 °C  temperature max.: 930 °C  throughput, capacity: 6000 kg/hThroughput per Hour+ 420-680 degrees Celsius: 6000kg+ 830-930 degrees Celsius: 3200kg- Red tube storage racks next to the furnace not included

CHARACTERISTICS HEAT TREATMENT EQUIPMENT  heating method: gas   temperature min.: 420 °C  temperature max.: 930 °C  throughput, capacity: 10000 kg/hThroughput per hour+ 420-680 degrees Celsius: 10'000kg+ 830-930 degrees Celsius:  7'150kg

Key data: 700 °C, 2400 mm, 6500 mm

For sale is: 1 piece gas-fired chamber furnace with air circulation and bogie hearth Manufacturer: Nolzen Industrieofenbau GmbH & Co. KG Type: KLWg 220/180/650 Year: 2017 for unsupervised operation for three-phase three-phase 400Volt For temperatures up to max. 700 degrees C. for natural gas "H", liquefied petroleum gas Number of burners: 8 Total burner power: 720kW For more technical data, see the attached PDF. The furnace itself was only in operation for 4 years and during this time it made about 100 annealings, each lasting 23 hours.

specifications: - Nominal /permanent temperature can be selected up to approx. 1150 ° - digital temperature setting - Timer - Interior size approx. W 250 x H 190 x D 400 mm - Loading by front door - Opening width of the front door B 240 x H 190 mm - Drive 400 V / 7.5 kW - Base H 800 mm - Space requirement approx. W 900 x H 1450 x D 1100 mm - Weight approx. 120 kg

Key data: 700 °C, 2400 mm, 6500 mm

1 piece gas-fired chamber furnace with air circulation and bogie hearth Type: KLWg 220/180/650 for unsupervised operation for three-phase three-phase current 400 volts/N, 50 Hz. for temperatures up to max. 700°C for natural gas "H" External oven dimensions approx. Width in mm: 3400 Width with control cabinet in mm: 3800 Height in mm: 3200 Length with inserted. Bogie hearth in mm: 8000 Length with fed. Bogie hearth in mm: 15500 clear interior dimensions approx. Width in mm: 2400 Height over beams in mm: 1800 Length in mm: 6500 Volume in m³: 25,7 Batch dimensions max. Width in mm: 2000 Height in mm: 1500 Length in mm: 6100 Weight max. in kg: 20000 Connected loads approx. Number of rule groups: 4 Number of burners: 8 Total burner power in kW: 720 Burner air blower in kW: 5.5 Circulating motor in kW: 22 Number of circulating motors: 4 Bogie hearth d ...

Specifications: - Operating temperature adjustable from 80° to 300° - Interior dimensions approx. W 1000 x H 1200 x D 900 mm - mot. Small parts conveyor belt for loading with small parts - Usable space 0.88 m³ - Total steam room 1.99 m³ - Exhaust air volume 85 m³/h - permissible solvent quantity 22 gr./per batch - Door opening W 1000 x H 1100 mm - Opening flap in the door approx. W 750 x H 270 mm - Connected value heating 24 kW - Connection value fan 4.45 kW - Space requirement approx.B 2000 x H 2900 m. Fan x D 1800 mm - Weight approx. 2000 kg - Control settings with or without timer Min / h / day - Timer - controlled temperature preselection - Temperature display - Emergency – Off – Button