subcategories
(3rd category level)
Manufacturer:
(Category: 103)
Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315 x 12. 8) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible.
Key data: 2500 mm, 1000 mm, 1100 mm
CNC Bed Milling Machine Manufacturer: Anayak Type Performer 2500 Year of manufacture 2007 Control Heidenhain iTNC530 ( with new monitor ) Table size 2700 x 850mm Load 6,000kg Travel X/Y/Z 2500/1000/1100mm Tool holder SK50 IKZ Internal Coolant Supply Chip conveyor Electronic Handwheel Heidenhain HR410 Head cannot be swivelled over program Engine on: 54.205h Spindle on : 14.850h Without the accessories that can be seen.
x-travel: 1600 mmy-travel: 710 mmz-travel: 700 mmControl: HEIDENHAIN, TNC 124 table surface area: 2200 x 550 mmspindle taper: SK 50 DIN 69871 spindle turning speed - stepless: 40 - 1600 U/minspindle drive: 11 kWfeed X/Y/Z-axis: 2000/2000/1000 mm/min.rapid traverse X/Y/Z axis: 5000/5000/2500 mm/minfeed motor: 3 kWdistance table / vertical spindle: 50 - 750 mmdistance table/horizontal spindle: 60 - 760 mmtable load: max. 3000 kgtotal power requirement: 15 kWweight of the machine ca.: 8 tdimensions of machine L x W x H: 3,50 x 2,82 x 2,70 mAccessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg
Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Sizes: various -Sale: only as a package -Weight: 0.8 kg
Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 260 mm-56 teeth: belt width approx. 85 mm-Receptacle: Taper clamping bushing: optibelt 3525-50 Ø 50 x 65 mm-Dimensions: Ø 255 x 100 mm-Weight: 22.6 kg
lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 141 mm-Dimensions: see photo technical drawing-Dimensions: 157/72/H108 mm-Weight: 1.8 kg
clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block-Step block: clamping pad for clamping tool, 2 pieces-Clamping width: 50 mm-Price/Delivery: complete-Dimensions: 120/60/H140 mm-Weight: 1.9 kg/piece
clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block-Step block: clamping pad for clamping tool, 4 pieces-Clamping width: 50 mm-Bore: Ø 30 mm-Price/Delivery: complete-Dimensions: 100/60/H45 mm-Weight: 1.0 kg/piece
Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling -X/Y/Z travel: 550/340/420 mm -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table-Manufacturer: Mikron, milling machine table T-slot table from CNC machining center UME 600-Table surface: 530 x 900 mm-T grooves: groove width 14 mm, groove spacing 63 mm-Transport dimensions: 900/530/H390 mm-Weight: 248 kg
lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 95 mm-Dimensions: see photo technical drawing-Dimensions: 110/60/H98 mm-Weight: 1.3 kg
Tool carrier for SK 30 holders-made of: polypropylene copolymer-Impact and scratch resistant, insensitive to heat-resistant to: mineral oil and various chemicals-Price: complete
Copy part head, copy head, part head-Copy head rail for: lathe, grinder-Dimensions: 465/80/H410 mm-Weight: 10 kg
Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 255 mm-Type: 56-14M-85-56 teeth: belt width approx. 85 mm-Receptacle: Taper clamping bushing: optibelt 3525-40 Ø 40 x 65 mm-Dimensions: Ø 255 x 100 mm-Weight: 24.5 kg
lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 143 mm-Dimensions: see photo technical drawing-Number: 2x clamps available-Price: per piece-Dimensions: 166/57/H115 mm-Weight: 1.7 kg/pc.
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 260 x 1000 mm -T slots: 16 mm
turning clamp, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, rotary indexing table, indexing table-Tactical table: pneumatic-Clamping surface: Ø 270 mm-Division: 24-Dimensions: 500/130/H280 mm-Weight: 35.7 kg
Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 228 mm -Type: D TB 90-8M-50 -Number of teeth: 90 teeth / Belt width: 50 mm -Mount: Taper clamping bushing 3020-40 / Ø 40 x 50.8 mm -Dimensions: Ø 228 x 60 mm -Weight: 12 kg
Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibel, timing belt pulley Ø 228 mm -Type: TB 90 8M 30 -Material: Cast iron -Number of teeth: 90 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-30 Ø 30 x 45 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 228 x 45 mm -Weight: 7.1 kg/pc.
Clutch gear, gear clutch, slip hub, slip clutch-Manufacturer: Mayr, ROBA slip hub slip clutch-Type: 3/100,210-Sprocket: Duplex 30 teeth-Dimensions: see photos-Total dimensions: Ø 158 x 70 mm-Weight: 4.4 kg
Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table -Clamping table: drilling machine table -Table surface: 480 x 330 mm -Bore: Ø 48 mm bolt circle Ø 108 x 13 mm -Groove width: 13 mm -Dimensions: see photo -Dimensions total: 540/550/H70 mm -Weight: 30 kg
Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 315 mm -Type: 8M -Number of teeth: 124 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-30 Ø 30 x 45 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 315 x 45 mm -Weight: 16.3 kg/pc.
lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 83 mm-Dimensions: see photo technical drawing-Dimensions: 100/72/H83 mm-Weight: 1.2 kg
Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 72-8M-20 -Material: Steel -Number of teeth: 90 teeth / Belt width: 20 mm -Mount: Optibelt 2012-30 taper clamping bushing Ø 30 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 192 x 32 mm -Weight: 4.1 kg/pc.
lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 101 mm-Dimensions: see photo technical drawing-Dimensions: 117/83/H140 mm-Weight: 1.8 kg
clamping rail, guide rail, support rail, stop rail-Mounting rail: with T-slot-Length: 1200 mm-Groove width: 15 mm, dimensions see photo technical drawing-Dimensions: 1200/80/H30 mm-Weight: 18.4 kg
Flat belt pulley, toothed pulley, multi-belt pulley, belt pulley, timing belt pulley -Manufacturer: Desch, timing belt pulley Ø 255 mm - Pitch: 14 mm / Belt width 55 mm -Receipt: Ø 40 x 50 mm taper bushing Desch 3020-40 -Dimensions: Ø 255 x 70 mm -Weight: 16.3 kg
Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 64-8M-50 -Material: Steel -Number of teeth: 64 teeth / Belt width: 50 mm -Mount: Optibelt 2517-40 taper clamping bushing Ø 40 x 44.5 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 168 x 60 mm -Weight: 6.8 kg/pc.
Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 48-8M-30 -Material: Steel -Number of teeth: 48 teeth / Belt width: 30 mm -Mount: Taper clamping bushing Tecnamic 2012-40 Ø 40 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 128 x 40 mm -Weight: 2.5 kg/pc.
