Manufacturer:
(Category: 106)
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 114100 €: 2156.49 €: 135 to: 3050 mm: 4 : 320 mm: 3340 mm: 500 mm: servomotorischer Riemenan : 100 mm/s: 10 mm/s: 100 mm/s: 650 mm: 250 mm: 4200 mm: 2200 mm: 2550 mm: 7300 kgservomotor drive with multiple switched flat belt system4 axes (Y1, Y2,X, R)CNC control DELEM DA-66S- 2D touchscreen display 17- 3D visualisation in simulation and production- intuitive touch-screen control (simple drawing of the bending outline with your finger)- simple and convenient data transfer- multi-simulation option- user friendly programming in dialogue form- graphic simulation of the bending sequenceservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)safety device BLVT light guardlinear guided sheet support ar ...
pressure:100 tthroat:350 mmstroke:6 - 100 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:850 x 700 mmhole in the table:470 x 150 mmtable height over floor:855 mmram surface:450 x 300 mmram adjustment:80 mmpower requirement:7,5 kWweight:5,0 tdimensions (WxDxH):1,5 x 2,3 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical
pressure:500 tdistance between columns:2240 mmstroke:1180 mmdistance table/ram, max. stroke up, adjustment up:1800 mmtable surface area:2050 x 1800 mmpressure of drawing cushion in table:250 tstroke of drawing cushion in table:380 mmdrawing cushion surface in table:1800 x 1200 mmpressure of drawing cushion in ram:122 tstroke of drawing cushion in ram:200 mmdrawing cushion area in ram:1800 x 1200 mmram surface:2215 x 1800 mmtable height over floor:500 mmspeed down:400 mm/sspeed up:10 - 400 mm/sworking speed:10 - 100 mm/sdepth of the foundation:3,0 mpower requirement:122 + 75 + 64,5 kWweight:110,0 tDimensions (WxDxH):3,6 x 2,2 x 8,5 mheight over floor:6,8 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table and ram:hydraulic
pressure:500 tdistance between columns:3200 mmstroke:1250 mmdistance table/ram, max. stroke up, adjustment up:1810 mmtable surface area:3000 x 1900 mmpressure of drawing cushion in ram:150 tstroke of drawing cushion in ram:200 mmdrawing cushion area in ram:2400 x 1200 mmram surface:3160 x 1900 mmspeed down:400 mm/sspeed up:250 mm/sworking speed:18 - 58 mm/sheight over floor:6,5 mpower requirement:90,0 + 36,5 kWweight:110 tGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in ram:hydraulic
pressure:800 tdistance between columns:3010 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:1350 mmtable surface area:3000 x 1800 mmtable height over floor:500 mmside window:1500 x 1400 mmram surface:3000 x 1800 mmspeed down:300 mm/soil volume:900 lheight over floor:5,4 mheight beneath floor:2,1 mpower requirement:200,0 kWweight:80,0 tDimensions (WxDxH):5,2 x 2,6 x 7,5 mram interlocking:in TDC depth stop:mechanical
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 137900 €: 2606.31 €: 220 to: 6050 mm: Y1 / Y2 / X Achse : 265 mm: 5100 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 1050 mm: 154 mm: 250 l: 22 kW: 7500 mm: 1770 mm: 3350 mm: 20800 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010 ...
nominal force:315 tstroke:300 mmno. of strokes:36 /mindistance between columns:540 mmdistance table/ram, max. stroke up, adjustment up:750 mmtable surface area:530 x 630 mmblow die to die:630 tAllowed max. force:500 tram surface:450 x 560 mmspindle diameter:180 mmpower capacity:18,0 kWweight:13,0 tDimensions (WxDxH):2,5 x 2,0 x 4,0 m
pressure:100 tdistance between columns:1060 mmstroke:700 mmdistance table/ram, max. stroke up, adjustment up:1250 mmtable surface area:1000 x 700 mmpressure of drawing cushion in table:40 tstroke of drawing cushion in table:200 mmdie cushion area:Ø 250 mmtable height over floor:950 mmside window:580 x 750 mmram surface:1000 x 700 mmoil volume:700 lpower requirement:47,0 kWweight:13,0 tDimensions (WxDxH):2,2 x 1,8 x 5,0 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical; motoric adjustable ram interlocking:SITEMA
pressure:160 tdistance between columns:2050/1900 mmstroke:15 - 170 mmno. of strokes:15 - 40 /mindistance table/ram, max. stroke up, adjustment up:690 mmtable surface area:1600 x 800 mmside window:800 mmram surface:1620 x 700 mmram adjustment:140 mmpower requirement:15,0 kWweight:24,0 tDimensions (WxDxH):3,3 x 2,3 x 5,3 mheight over floor:4,8 mheight beneath floor:0,5 mclutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic
pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmpressure of drawing cushion in table:60 tstroke of drawing cushion in table:100 mmdrawing cushion surface in table:1300 x 810 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmheight beneath floor:0,3 mpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor without drawing cushion:0,3 mheight beneath floor with drawing cushion:1,0 mclutch-/ brake combination:pneumatic; Desch overload protection in ram:mechanical ram counterbalance:pneumatic ram adjustment:motoric drawing cushion in table:pneumatic Mechanical pincer ...
pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor:0,3 mpneumatic clutch-brake combination:Desch Mechanical pincers feed:Obru, BVK 3.10.3
pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmpressure of drawing cushion in table:60 tstroke of drawing cushion in table:100 mmdrawing cushion surface in table:1300 x 810 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor without drawing cushion:0,3 mheight beneath floor with drawing cushion:1,0 mpneumatic clutch-brake combination:Desch drawing cushion in table:pneumatic Mechanical pincers feed:Obru, BVK 3.10.3
pressure:6,3 tthroat:300 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:450 x 400 mmhole in the table:80 mmtable height over floor:700 mmram surface:50 mmoil volume:90 lpower requirement:5,5 kWweight:1,35 tdimensions (WxDxH):1,8 x 2,0 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical
pressure:040 tstroke:8 - 50 mmno. of strokes:50 - 300 /mindistance between columns:600 mmdistance table/ram, max. stroke up, adjustment up:285 mmtable surface area:590 x 500 mmhole in the table:590 x 40 - 100 mmtable height over floor:860 mmcolumn travel -side:280 mmram surface:590 x 380 mmram adjustment:80 mmmaterial width of feeder:150 mmpower requirement:7,5 kWclutch:pneumatic ram adjustment:motoric pincer feed:mechanical
pressure:035 tthroat:225 mmstroke:8 - 100 mmno. of strokes:110 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:580 x 460 mmhole in the table:250 x 150 mmtable height over floor:700 mmtable adjustable:230 mmram surface:355 x 120 mmram adjustment:70 mmpower requirement:2,2 kWweight:1,5 tdimensions (WxDxH):1,0 x 1,5 x 2,05 mclutch:rolling key overload protection in ram:mechanical
pressure:160 tthroat:370 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1000 x 700 mmhole in the table:100 mmtable height over floor:820 mmram surface:600 x 520 mmspeed down:350 mm/sspeed up:350 mm/sworking speed:12 - 36 mm/soil volume:1100 lpower requirement:27,0 kWweight:16,5 tdimensions (WxDxH):1,8 x 2,7 x 3,95 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:motoric adjustable
material width:450 mmmaterial thickness:0,5 - 1,0 mmno. of straightening rolls:6 straightening roll diameter:53 mmnumber of draw-in rolls:2 diameter of draw-in rolls:96 mmpower requirement:1,0 kWweight:0,65 tdimensions (WxDxH):1,0 x 1,0 x 1,55 m
pressure:100 tthroat:450 mmstroke:170 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:3220 x 800 mmtable height over floor:850 mmram surface:3220 x 800 mmspeed down:50 mm/sspeed up:150 mm/sworking speed:7 mm/soil volume:600 lpower requirement:20,0 kWweight:16,0 tdimensions (WxDxH):3,7 x 2,5 x 2,6 m
pressure:080 tthroat:360 mmstroke:8 - 112 mmno. of strokes:78 /mindistance table/ram, max. stroke up, adjustment up:467 mmtable surface area:900 x 650 mmhole in the table:250 mmtable height over floor:800 mmpassage to the back:330 mmram surface:650 x 400 mmram adjustment:80 mmpower requirement:11,0 kWdimensions (WxDxH):1,2 x 2,2 x 2,9 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanisch
pressure:160 tstroke:160 fix mmno. of strokes:30 - 120 /mindistance between columns:1190 mmdistance table/ram, max. stroke up, adjustment up:735 mmtable surface area:1200 x 1000 mmhole in the table:500 x 300 mmtable height over floor:900 mmside window:600 mmram surface:1000 x 800 mmram adjustment:125 mmmaterial width of feeder:550 mmmaterial thickness of feeder:0 - 6,0 mmfeed length:350 mmmaterial cross-cut:1100 mm²Feed speed:50 m/minpower requirement:45,0 kWweight:25,0 tdimensions (WxDxH):2,3 x 2,1 x 4,7 minfinitely variable drive:PIV overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic pincer feed:mechanisch, RS 350/550 SL 90
pressure:315 tdistance between columns:1620 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1600 x 1100 mmpressure of drawing cushion in ram:20 tstroke of drawing cushion in ram:100 mmdrawing cushion area in ram:300 x 300 mmside window:600 x 1100 mmtable height over floor:750 mmram surface:1600 x 1100 mmoil volume:1500 lpower requirement:110,0 kWweight:35,0 tdimensions (WxDxH):4,65 x 2,61 x 5,5 mheight over floor:5,05 mheight beneath floor:0,45 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in ram:hydraulic ram interlocking:pneumatic cutting impact cushioning:hydraulic
pressure:60 tdistance between columns:650 mmstroke:220 mmdistance table/ram, max. stroke up, adjustment up:410 mmtable surface area:600 x 525 mmpressure of drawing cushion in table:5 tstroke of drawing cushion in table:80 mmtable height over floor:900 mmside window:200 mmram surface:560 x 490 mmdimensions (WxDxH):1,9 x 1,3 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick FGS 600 drawing cushion in table:hydraulic foundation pit:not necessary
pressure:60 tdistance between columns:650 mmstroke:220 mmdistance table/ram, max. stroke up, adjustment up:410 mmtable surface area:600 x 525 mmhole in the table:110 mmtable height over floor:900 mmside window:200 mmram surface:560 x 490 mmpower requirement:15,0 kWdimensions (WxDxH):1,9 x 1,3 x 2,7 mfoundation pit:not necessary
pressure:250 tdistance between columns:1110 mmstroke:250 mmDistance table/ram, max. stroke up, adjustment up:500 mmTable surface area:1100 x 900 mmTable height above floor:950 mmSide window:690 mmRam surface:1100 x 900 mmOil volume:730 lPower capacity:56,0 kWDimensions (WxDxH):2,3 x 1,55 x 3,96 m
pressure:160 tthroat:360 mmstroke:200 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:920 x 700 mmHole in the table:150 mmtable height over floor:960 mmpassage to the back:590 mmram surface:620 x 560 mmspeed down:390 mm/sspeed up:390 mm/sworking speed:58 mm/spower requirement:30,0 kWweight:16,0 tdimensions (WxDxH):1,6 x 2,5 x 3,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanisch
pressure:2000 tdistance between columns:975 mmstroke:400 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1015 x 1050 mmtable height over floor:800 mmcapacity of ejector in table:6,3 tejector stroke in table:100 mmcapacity of ejector in ram:65 tejector stroke in ram:100 mmram surface:975 x 1050 mmreturn capacity:150 tspeed down:235 mm/sspeed up:250 mm/sworking speed:5 - 20 mm/soil volume:4000 lheight over floor:3,65 mheight beneath floor:3,75 mpower requirement:194,0 kWweight:105,0 tdimensions (WxDxH):5,0 x 6,5 x 7,4 m
pressure:100 tdistance between columns:1000 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:980 x 700 mmpressure of drawing cushion in table:4 x 10 / 1 x 20 tstroke of drawing cushion in table:180 mmtable height over floor:800 mmside window:400 mmram surface:1000 x 700 mmspeed down:500 mm/sspeed up:450 mm/sworking speed:60 mm/spower requirement:40,0 kWdimensions (WxDxH):1,5 x 1,4 x 4,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:4 x 10 t + 1 x 20 t, getrennt einschaltbar foundation pit:nicht erforderlich
pressure:200 tdistance between columns:970 mmstroke:360 mmDistance table/ram, max. stroke up, adjustment up:630 mmtable surface area:1000 x 800 mmcapacity of ejector:10 tejector stroke in table:160 mmtable height over floor:850 mmside window:400 mmram surface:1000 x 800 mmspeed down:420 mm/sspeed up:410 mm/sworking speed:50 mm/soil volume:1240 lreturn capacity:24 tpower requirement:45,0 + 15,0 kWweight:16,0 tdimensions (WxDxH):2,7 x 2,5 x 4,3 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:mechanisch foundation pit:nicht erforderlich
: neu : 2026 : 070179 : prompt, Zwischenverkauf v : Türkei : 19900 €: 382.08 €: 1 : 150 to: fix : 300 mm: 610 mm: 1020 mm: 9 mm/s: 5 mm/s: 10 mm/s: 600x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2470 mm: 2450 kg2 guidingsupper plate with T-slotstable plate with T-Slotsmanometerrapid down move with automtic changeto working speedpiston stops in every position2 HAND CONTROL AND FOOT PEDALtable height adjustableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
