Manufacturer:
(Category: 106)
: neu : ca. 4 Monate ab Auftragse : Italien : 258000 €: 400 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4500 mm: 5000 mm: 2600 mm: 24000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmHorizontal verschiebbarer Zylinder2.200 mmHydraulisch beweglicher Ständer: 3.600 mmBedienung über Handhebel sowie BedienpanelTisch mit integriertem Zylinder zum anheben des WerkstücksAusrüstung gemäß CE Vorschriften Betriebsanleitung in DEUTSCH und ENGLISCH(Symbolfoto)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 500 to: 500 mm: 5.000 x 2.550 mm: 700 mm: 18 mm/s: 3 mm/s: 5000 mm: 5000 mm: 3000 mm: 32000 kg: horizontal verschiebbar : 2550 mm: 1.700 mm: 3.600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tthroat: 220 mmstroke: 8 - 80 mm mmtotal power requirement: 2,2 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 0,9 x 1,5 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Millutensil BV 30 ERGYear of manuf. : 2022 Control : Siemens Simantic HMI ____________Description:In Generel:Table dimensions:1,500 x 1,000 mmMax. clamping force:500 kNMax. load capacity top plate:2,500 kgMax. load capacity under plate:7,000 kgRG version:plate can be pulled out and tilted:
: neu : ca. 4 Monate ab Auftragse : Italien : 79500 €: 1502.55 €: 60 to: 500 mm: 700x350 mm: 700x500 mm: 600 mm: 250 mm: 120 mm/s: 38 mm/s: 8 mm/s: 58 mm/s: 5.5 kW: 1100 mm: 1500 mm: 2350 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 112800 €: 2131.92 €: 220 to: 3050 mm: Y1 / Y2 / X und R Achse : 265 mm: 2600 mm: 410 mm: 530 mm: hydraulisch : 200 mm/s: 12 mm/s: 180 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 104 mm: 11 kW: 4250 mm: 1770 mm: 2900 mm: 12250 kg1 SERVO MOTOR AND PUMP PER CYLINDERStandard accessories:4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm trans ...
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 199300 €: 3766.77 €: 250 to: 8 mm: 1400 mm: 800 mm: 250 mm: 23 - 220 mm: 25 - 50 1/min: 950x620 mm: 8 : 120 mm: 410 mm: 820 mm: 33 kW: 1600 mm: 2900 mm: 4250 mm: 25000 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectorautomatic cams resetdouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety controls- alarms view-overload protectorPRICE FCA ITALYThe data for this ad was created ...
: neu : ca. 4 Monate ab Auftragse : Italien : 132500 €: 2504.25 €: 200 to: 500 mm: 1250x1000 mm: 600 mm: 25 mm/s: 3,5 mm/s: 7.5 kW: 1550 mm: 1300 mm: 2700 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualOPTIONS: Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 86300 €: 1631.07 €: 150 to: 300 mm: 950x650 mm: 1200x750 mm: 550 mm: 100 mm/s: 5,5 mm/s: 165 mm/s: 11 kW: 2200 mm: 2200 mm: 3250 mm: 8200 kg4-pillar guidetable and ram with T-slotsmanual stroke adjustment via cam switchmanual and automatic operationfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to: 400 mm: 1000x680 mm: 1000x740 mm: 765 mm: 250 mm/s: 10-20 mm/s: 22 kW: 2400 mm: 1525 mm: 3900 mm: 10500 kgNC control with touchscreen8-fold ram guidetable and ram with T-slots2 hand operationpressure adjustmentstroke adjustmentdie cushioncentral lubrication systemlight guarduser manual in German or Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 92000 €: 1738.8 €: 200 to: 500 mm: 2.500 x 2.050 mm: 800 mm: 20 mm/s: 2 mm/s: 2950 mm: 2500 mm: 2600 mm: 6500 kg: horizontal verschiebbar : 2050 mm: 1450 mm: 1600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74800 €: 1413.72 €: 40 to: 2050 mm: Y1 / Y2 / X und R Achse : 200 mm: 1700 mm: 350 mm: 440 mm: servomotorischer Spindela : 180 mm/s: 10 mm/s: 115 mm/s: 650 mm: 250 mm: 1000 mm: 7.2 kW: 2600 mm: 1450 mm: 2650 mm: 4400 kgSTANDARD EQUIPTMENT:servomotorized spindle drive4 axes (Y1, Y2, X and R)Color graphics controlDELEM DA-66S- 17 ", Touchscreen- 3D imaging in simulation and production- Suitable for personal Windows applications- Compatible with DelemModusys- USB and peripheral interface- Skill-specific application treatment- Sensor, bending and correction interfaceservo motorized back gauge on linear guides and ball screwsCNC crowning tableupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)laser safety device Fiessler AKASmounted on the upper beamlinear guided sheet support armsaccording to C ...
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7700 €: 148.61 €: 100 to: fix : 900 mm: 1050 mm: 1900 mm: 850 mm: 2250 (PSS: 2400) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 100 TL: 1 speed 4 mm/s, single-hand control with lever € 7.700,00 PSS 100 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.400,00 PSS100 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.000,00 PSS 100: same as PSS 100 NC but with stroke 500 mm € 10.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 190000 €: 3591 €: 300 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 5000 mm: 2600 mm: 18000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2024 : 7319 : prompt, Zwischenverkauf v : Türkei : 6900 €: 1 : 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTION:1 pair of V-block € 540,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 31200 €: 595.92 €: 100 to: horizontal verschiebbar : 500 mm: 700 mm: 1550 mm: 25 mm/s: 2 mm/s: 2400 mm: 1200 mm: 2450 mm: 1960 kgHORIZONTAL MOVABLE CYLINDER 1.050 MM2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 26500 €: 506.15 €: 100 to: horizontal verschiebbar : 500 mm: 700 mm: 1050 mm: 25 mm/s: 2 mm/s: 1900 mm: 1200 mm: 2450 mm: 1770 kgHORIZONTAL MOVABLE CYLINDER 600 MM2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 25200 €: 481.32 €: 100 to: fix : 500 mm: 700 mm: 1050 mm: 25 mm/s: 2 mm/s: 1900 mm: 1200 mm: 2450 mm: 1300 kg2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 18000 €: 345.6 €: 40 to: fix : 500 mm: 700 mm: 900 mm: 29 mm/s: 4 mm/s: 1600 mm: 1000 mm: 2350 mm: 790 kg2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 197600 €: 3734.64 €: 400 to: 6050 mm: 3 : 365 mm: 5100 mm: 510 mm: 630 mm: hydraulisch : 120 mm/s: 8 mm/s: 100 mm/s: 750 mm: 350 mm/s: 300 mm/s: 250 mm: 1220 mm: 154 mm: 500 l: 37 kW: 7500 mm: 2110 mm: 3810 mm: 34660 kg3 axes (Y1, Y2, X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010 / A / 75 ...
: gebraucht : 2000 : 070165A : prompt, Zwischenverkauf v : Italien : 27900 €: 1 : 40 to: 2.6 mm: 650 mm: 380 mm: 120 mm: 8 - 78 mm: 145 1/min: 6 : 60 mm: 40 mm: 195 mm: 297 mm: 800 mm: 3 kW: 1450 mm: 1150 mm: 2150 mm: 2200 kgTwo-hand control panel and foot pedalWork area enclosure with safety switchAdditional bolster plateCentral lubrication systemStroke counterOperating manual with CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 6500 €: 125.45 €: 70 to: fix : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7300 €: 140.89 €: 70 to: horizontal verschiebbar : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 M TL: 1 speed 4 mm/s, single-hand control with lever € 7.300,00 PSS 70 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.000,00 PSS 70 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 8.700,00 PSS 70 M: same as PSS 70 M NC but with stroke 500 mm € 9.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 22900 €: 439.68 €: 40 to: 500 mm: 700x500 mm: 600 mm: 26 mm/s: 9 mm/s: 4 kW: 1400 mm: 900 mm: 2200 mm: 1300 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 25000 €: 480 €: 70 to: 500 mm: 700x500 mm: 600 mm: 25 mm/s: 5 mm/s: 4 kW: 1400 mm: 900 mm: 2250 mm: 1900 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 31400 €: 599.74 €: 100 to: 500 mm: 800x600 mm: 615 mm: 26 mm/s: 4 mm/s: 4 kW: 1600 mm: 900 mm: 2300 mm: 3100 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 43200 €: 825.12 €: 150 to: 500 mm: 800x600 mm: 630 mm: 22 mm/s: 3 mm/s: 4 kW: 1800 mm: 1200 mm: 2400 mm: 4500 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:200 tdistance between columns:1100 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1100 mmtable surface area:1000 x 1000 mmpressure of drawing cushion in table:63 tstroke of drawing cushion in table:250 mmdie cushion area:800 x 750 mmtable height over floor:800 mmram surface:1000 x 1000 mmSpeed down:400 mm/sspeed up:250 mm/sworking speed:22 - 56 mm/spower requirement:45,0 kWweight:24,0 tdimensions (WxDxH):2,4 x 1,5 x 5,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic
pressure:6,3 tthroat:210 mmstroke:200 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:380 x 350 mmhole in the table:100 mmtable height over floor:1050 mmram surface:45 mmpower requirement:4,0 kWweight:0,8 tdimensions (WxDxH):0,8 x 1,2 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
pressure:035 tthroat:240 mmstroke:4 - 70 mmno. of strokes:120 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:580 x 440 mmhole in the table:200 x 170 mmtable height over floor:670 - 820 mmtable adjustable:150 mmram surface:300 x 175 mmram adjustment:50 mmpower requirement:3,0 kWweight:2,3 tdimensions (WxDxH):1,2 x 1,4 x 2,1 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical
