subcategories
(3rd category level)
Manufacturer:
(Category: 109)
Tool holder, milling holder, milling tool, long milling arbor, mounting bracket -Milling chuck: SK40 chuck -Shaft: Ø 27 mm -Dimensions: see photos -Dimensions: Ø 58 x 370 mm -Weight: 1.7 kg
Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: May, Mounting bracket for reamers -Recording: MK4 -Price/Fee: complete -Dimensions: Ø 31 x 310 mm -Weight: 1.1 kg
serial number: 208892 control: Siemens 611 weight: 6,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process., Accessories: Total enclosure, Integrated loading system and tool magazine Automatic machining of up to 12 HSK 63 tools, Program for erosion across the tool center at the cutting edge and for free erosion, Hardware and software for DNC service, Gripper fingers for workpiece automation SK40/HSK63-A,E/HSK63-B,F, Adaptation to the A-axis on HSK63-A,E including 25 mm diameter test mandrel (HSK63 A,E system), Grinding mist extraction N 181, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Measuring probes, Machine lamp, Automatic central lubrication, Cutter outside diameter: Max. 250 mm, Cutting length: Max. 260 mm, Shank tool diameter: 10-250 mm, Tool weight: Max. 20 kg, traverse: X-axis 275 mm, Y- ...
Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process., Accessories: Total enclosure, Integrated loading system and tool magazine Automatic machining of up to 12 HSK 63 tools, Program for erosion across the tool center at the cutting edge and for free erosion, Hardware and software for DNC service, Gripper fingers for workpiece automation SK40/HSK63-A,E/HSK63-B,F, Adaptation to the A-axis on HSK63-A,E including 25 mm diameter test mandrel (HSK63 A,E system), Grinding mist extraction N 181, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Measuring probes, Machine lamp, Automatic central lubrication, Tailstock, Cutter outside diameter: Max. 250 mm, Cutting length: Max. 260 mm, Shank tool diameter: 10-250 mm, Tool weight: Max. 20 kg, traverse: X-axis ...
Suitable for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard cutting materials. The workpieces can be picked up on the fly or between the centres (option)., Accessories:, Total enclosure, HR workpiece magazine (round magazine) for up to 16 workpieces up to 130 mm in diameter, 20 kg, or up to 8 workpieces up to 230 mm in diameter, 20 kg., Magazine disk for 16/8 HSK63-A,E workpieces with a diameter of 130/230 mm, up to 20 kg., Adapter to the A axis for HSK63-A,E., Automatic fire extinguishing system., N282 extraction system with 600 m³/h air flow., Automatic cover flap., Automatic central lubrication., Measuring probe., Cooling unit for dielectric fluid including cooling unit., HSK-A63 test mandrel., Workpiece diameter: up to 320 mm, workpiece length: up to 500 mm, workpiece weight: up to 25 kg, Holding mandrel: SK 50, Wire diameter: 0.1 ...
This Mitsubishi MV1200S wire EDM machine was manufactured in 2017. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 220 mm. The machine is equipped with automatic wire threading and the Mitsubishi D-CUBES control system, ensuring efficient and stable production. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200S machine we have for sale. Contact us for further details.
CMM machine manufactured in 2020. This KEYENCE WM c3000 includes a measuring range of up to 25 m and operates within a temperature range of 0 to 40°C. The delivery scope features a camera tripod, laser scanner, handheld tactile probe unit, and various measuring tips. If you are looking to get high-quality measurement capabilities, consider the KEYENCE WM c3000 machine we have for sale. Contact us for further details.
CNC vertical machining center Type: VF-8 Manufacturer: Haas Year: 2016 X: 1626 mm Y: 1016 mm Z: 762 mm Tool magazine 30 positions Distance between spindle tip and table (~ max) 742 mm The distance between the tip of the spindle and the table (~ min) 107 mm Maximum weight on the table (evenly distributed) 1814 kg Screw chip conveyor Programmable cooling nozzle Direct threading 15,000 rpm spindle, taper ISO 40, vector drive 30 hp (22.4 kW), direct drive "inline" Renishaw wireless probe system Linear scales 2x vice 30x Tool Holder Machine in good condition, under power. Find more here - / Contact us at -
Mounted granite slab 40 x 25 x 8 cm (L/W/H) Auction-ID: A1-48199-29
x-travel: 800 mmy-travel: 700 mmz-travel: 700 mmControl: Wenzel max. workpiece weight: 300 kgaccuracy: Renishaw SP 25 MMeasurement inaccuray: 2,6 µmrepeatability: 1,6 µmLongitudinal uncertainness: MPE: 3,5 + L/300 µm (standard)Longitudinal uncertainness: MPE: 3,5 + L/300 µm (extended)0: 15 - 30 °C0: 18 - 22 °C (standard)0: 18 - 28 °C (extended)speed: Joystick 0 - 20 | 0 - 100 mm/sspeed: CNC axis related 300 mm/sspeed: CNC vectorial 520 mm/sAccelaration: CNC axis related 700 mm/s²Accelaration: CNC vectorial 1200 mm/s²total power requirement: - kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 3,38 x 2,2 x 3,0 mDocuments: elektr. hand wheel: PC: Intel Core i7, 16 GB RAM Measuring MachineWENZEL - SF 87- Renishaw FCR25-L6 Stand Alone Changer with 6 Storage Positions- Renishaw PH 10 M Probe- Wenzel WPC 2040 Path Control System- WM | Quartis Measurement Software- Refe ...
Offer 26141 Technical data: - Vacuum cab with viewing window - Working space size approx. W 530 x H 400 x D 450 mm - Front front door that folds up with operating openings - Blasting room accessible by hand for operating the blasting gun - Viewing panel 280 x 180 mm - Blasting material recovery - Pressure reducer with water separator - Footswitch - Base frame W 900 x H 600 x D 900 mm - Drive 400 V / 0.55 kW - Space requirement approx. W 900 x H 1800 x D 900 mm - Weight approx. 200 kg
Fanuc M-2iA/3SLYear of manuf. : 2021 Control : Fanuc R-30iB Mate Plus ____________Description:In General:Number of axes:4Repeatability:+/- 0.1 mmWorking range:1,130 x 400 mmMaximum wrist weight:3 kgController:Fanuc R-30iB PlusRemote Controll:iPendant Touch
+GF+ AgieCharmilles FI 440 SLPYear of manuf. : 2008 Control : Sonstige Movement X/Y/Z : 550/350/400 mm____________Description:Workingspace:Movement in X/Y/Z:550/350/400 mmMovement in U/V:550/350 mmTable size:900 x 600 mmWorkpiece dimensions (max.):1.200 x 700 x 400 mmLoad capacity (max.):1.500 kgDielectricheight (min./max.):0/435 mmClearance angle (max.):+/- 45°/400 mmGenerator:Technology:ISOPULS-DoppelquellengeneratorCutting speed:400 mm²/minFinest arbitration:0,20 μm RaWire:Standard diameter:0,25 mmWire guiding:Closed diamond guidesEquipment/Accessory:Tankcapacity:1.200l DielektrikumDielektrikumsmanagement I:FiltercartigeDielektrikumsmanagement II:Chiller, EckertSetup operations:Electronic HandwheelWorkpiececlamping:Clampingjaw, EROWAFurther Accessory:Misc. Electrodeholder, clamping devices and Erodingwire:Attention:The displayed Deionisationsfilters are not included in our ...
Incro BelugaYear of manuf. : 2021 ____________Description:Technical Data:Capacity (max.):2.500 l/h
AddUP AddUP BeAM Modulo 400Year of manuf. : 2022 Control : Siemens SINUMERIK ONE NCU 1750 ____________Description:In general:System:Industrial DED systemSafety:Vacuum lock and inert gas purgingYear of manufacture:2022Weight:approx. 7,500 kgGeometry:Number of axes:5-axis kinematics with automatic tool changerTravel ranges (x/y/z):650×400×400 mmTable diameter:400 mmTable load capacity (max.):100 kgMeasurement:Renishaw probeLasers & Optics:Laser:Dual IPG laserFine machining:500 W (IPG fiber laser, 200 µm fiber)High build-up rate:2000 W (2 kW) (IPG fiber laser, 600 µm fiber)Optics:Precitec YW 30 optics with VX10/VX24 nozzles for standard and micro claddingControl unit:Control:SINUMERIK ONE NCU 1750 (SW 6.14) on a 24 SIMATIC touch panelProcess preparation:Via Siemens NX CAM and edge computing (IPC 427e)Monitoring:Live process control via HMI Display Manager and sensors for the chamb ...
Pfiffner RT 100-12Year of manuf. : 2013 Control : Siemens 840 D ____________Description:Rotary-Indexing-table/Spindle:Clamping stations:12 motorised spindlesDrive:Torque drive, water-cooledPosition measuring system:DirectSwitching time:1.5 secondsSpindles:Water-cooled motor spindlesC-axes:0.001°, hydraulic clampingSpeed:5,500 rpmPower:11 kWClamping device:ChuckBasic modules:Technology:Positioning module, 3-axisX-axis:50 mmY-axis:100 mmZ-axis:100 mmPosition measuring systems:Direct in all axesCoolant supply:Integrated::Workpiece size (max.):100 x 100 x 100 mmStation 1:Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot)Vertical:Measuring raw partStation 2:Horizontal:4-fold turret without driveVertical:Measuring reclamping error (C-axis zeroing)Station 3:Horizontal:4-fold turret without driveVertical:Not usedStation 4:Horizontal:4-fold turret without driveVertical:No ...
A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible.
digital: ja multifix: ja : ja documentation: ja bed bridge: ja good condition: ja centre distance: 1800 mm: 530mm serial number: 0556 hollow: 60 mmweight: 3,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table dimensions: 1000-550 mmControl: Grundig x-travel: 1000 mm: ja milling-head swivable +/-: ja control: Grundig serial number: 0209 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- 15 KW-1455 rpm motor. - Fan with a diameter of approx. 800 mm. - Inlet tube diameter approx. 500 mm. - Maximum air flow 9000 m³/h. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48166-10
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, solid construction with 8 drawers -Width: 420 mm -Depth: 625 mm -Height: 1350 mm -Drawers: See photos for layout/height -Door: lockable, without key -Weight: 75 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, solid construction with 8 drawers -Width: 420 mm -Depth: 625 mm -Height: 1350 mm -Drawers: See photos for layout/height -Door: lockable, without key -Weight: 91 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, solid construction with 8 drawers -Width: 420 mm -Depth: 625 mm -Height: 1350 mm -Drawers: See photos for layout/height -Door: lockable, without key -Weight: 78 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, solid construction with 8 drawers -Width: 420 mm -Depth: 625 mm -Height: 1350 mm -Drawers: See photos for layout/height -Door: lockable, without key -Weight: 74 kg
350 € 
