subcategories
(3rd category level)
Manufacturer:
(Category: 109)
Year: 2018 - technically efficient, ready to work – after full service - hydro-pneumatic controls - adjustable position of the heads - automatic knife positioning
Manufacturer: PROFIMAT Model: 65.8/270.8 Year of Manufacture: 2007 Type of Machine :Bar Feeder Voltage: 400 V Frequency: 50/60 Hz Power: 2 kW Technical Specifications - Bar capacity range: 65.8 mm minimum to 270.8 mm maximum diameter - Drive system: Servo drive - Type series: Multi-channel bar loading magazine Find more here - / Contact us at -
Manual Sandblasting Cabinet Manual sandblasting cabinets are economical and versatile booths that can be used with various abrasives. The booths feature doors that open from both sides for ergonomic use. The sandblasting booths are made of sheet metal, and both the inside of the booth and the inside of the door are coated with wear-resistant rubber. The doors are equipped with special gasket reinforcement for complete sealing. The front of the booth features two hand application holes. These holes house long-lasting, replaceable gloves and a wide-angle viewing window with glass. An optional portable stand and a rotary turntable are available on the side of the booth. The compressed air circuit includes various components, from an oil and water filter to a pressure gauge regulator and a foot-operated, lockable pedal valve. A long-lasting boron carbide sandblasting nozzle is al ...
Manual Sandblasting Cabinet Manual sandblasting cabinets are economical and versatile booths that can be used with various abrasives. The booths feature doors that open from both sides for ergonomic use. The sandblasting booths are made of sheet metal, and both the inside of the booth and the inside of the door are coated with wear-resistant rubber. The doors are equipped with special gasket reinforcement for complete sealing. The front of the booth features two hand application holes. These holes house long-lasting, replaceable gloves and a wide-angle viewing window with glass. An optional portable stand and a rotary turntable are available on the side of the booth. The compressed air circuit includes various components, from an oil and water filter to a pressure gauge regulator and a foot-operated, lockable pedal valve. A long-lasting boron carbide sandblasting nozzle is al ...
200 lt manual blasting machine set Whole set contents to be delivered below: • 200 lt automatic sandblasting pot • 20 mt blasting hose • 40 mt pneumatic hose • 20 mt oxygen hose • Sandblasting mask • Full body leather overalls • Automatic valve • SGV valve • Air stand • Blasting nozzle • Adapter • Coupling • Blasting claw couplings
A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process and a cooling unit is available. Filtration capacity: 240l/min, Filtration fineness: 3µm-5µm, Filling capacity: 500l, Machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible.
A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process is available. Filtration capacity: 120l/min, Tank capacity: 500l, Filtration fineness: 5µm, Machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible.
A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process and a cooling unit is available. Filtration capacity: 240l/min, Filtration fineness: 3µm-5µm, Filling capacity: 500l, Machine dimensions X/Y/Z: approx. 1850mm/1250mm/1550mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible.
A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process is available. Filtration capacity: 120l/min, Tank capacity: 500l, Filtration fineness: 5µm, Machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible.
A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible.
This 5-axis Mitsubishi FA20 wire EDM machine was manufactured in 2004. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The machine can handle workpieces up to 1050 mm x 800 mm x 295 mm and has a maximum workpiece weight of 1500 kg. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi FA20 wire EDM machine we have for sale. Contact us for further details.
diameter: - mmworkpiece length: - mmwork piece width: mmtotal power requirement: kWweight of the machine ca.: 90 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
taper MK: 3 serial number: 4131 throat: 1000 mmdocumentation: ja clamping: hydraulisch kWweight of the machine ca.: 2,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GEKA HYDRACROP 110 SD hydraulic ironworker machine was built in 2009 in Spain by MAQUINARIA GEKA S.L.U. It is an extremely powerful and versatile machine designed for complex machining of steel parts, making it ideal for use in both production plants and locksmith workshops. The machine enables multiple machining operations to be performed in one place, such as punching holes and shearing flat bars, angle bars and steel bars. The GEKA HYDRACROP 110 SD is equipped with 5 independent workstations with interchangeable tools made of high-quality tool steel. Each station is hydraulically controlled by two cylinders and separate footswitches. This solution enables the simultaneous operation of two operators at different stations, which results in increased efficiency and production effectiveness. All this is complemented by a robust design, ensuring high stability even under intensive use. ...
GEKA HYDRACROP 110 SD hydraulic ironworker machine was built in 2020 in Spain by MAQUINARIA GEKA S.L.U. The machine is designed for the versatile machining of steel parts, enabling to perform multiple operations on a single machine, which increases production efficiency in industrial plants and locksmith workshops. The GEKA HYDRACROP 110 SD is equipped with 5 individual workstations, designed for punching holes and shearing flat bars, angle bars and steel bars. Each station uses interchangeable tools made of tool steel, which enables adaptation of the machine operation to the current production needs. The stations are controlled by two hydraulic cylinders and separate foot switch controlls, enabling the simultaneous operation of two operators at different stations and increasing production efficiency. All this is complemented by a robust design that maintains high stability during eve ...
An automatic Weil tube welding system with rounder, tube transfer, end processing and Trumpf TruFlow laser unit is available. Tube diameter range: 80mm-250mm, material thickness range: 0.4mm-1mm, max. tube length: 1000mm. Documentation available. An on-site inspection is possible.
internal diameter: 25 mmexternal diameter: 39 mmwall strength: 7 mmlength in total: 33 mjet hoseUnused, but shows significant signs of storage wearThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
