used Forging Hammers for sale

ram weight: 1000 kgstroke: 1000 mmthroat: 800 mmimpact capacity: 4200 mkptotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: mSteam driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 2000 KGram hammer stroke: 1080 mmthroat: 1100 mmimpact capacity: 10000 kgmno. of strokes: 125 Hub/minram hammer weight: 2300 kgwork height max.: 620 mmtotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: mSteam driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ram hammer weight: 480 kgstroke: 710 mmthroat: 550 mmimpact capacity: 1250 kpmno. of strokes: 210 Hub/minram hammer stroke: 710 mmwork height max.: 720 mmtotal power requirement: . kWweight of the machine ca.: 7,4 tdimensions of the machine ca.: mpressure: 400 kgSteam driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2000 NmStroke length: 500 mmoperating pressure: 6-8 bardimensions: mmweight: 1,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 kgworkpiece length - max.: 6500 mmweight of the machine ca.: 600 tdimensions of the machine ca.: 120x30 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

(Schloemann) Beche DGH 40 Ton ( Revamped by Schuler group 2019) Manufacturer: BECHE (Schloemann) Type: DGH 40 YOM: Revamped 2019 Machine Number: 2412-HW Including 12 Ton Wellman manipulator Impact work: 40,000 mkg Total bar lift.:1.250 mm Maximum number of strokes:80 Pro Minute Average score: 6 Pro Minute Air consumption per ten blow Blow in . m in required air at the strongest hit: 6.8 Cold Air Compressor performance in m3/min: 41 Cold Air Compressor performance in m3/min:27 Hot air (160° C) Power requirement of the compressor in hp:260 Cold Air Power requirement of the compressor in hp:180 Cold Air Air tank capacity:30 m3 Steam consumption per hit with the strongest hit:3.5 kg Steam consumption per minute (saturated steam):21 kg Clear width between the guides: 1200 mm Maximum singing sounds: 2700 mm Lowest overall height of the dies without dovetail: 575 mm O ...

Manufacturer: BLISS Model: S-2750-4R-72-144 YOM: 1996 Forging Press of 2.750 T Revamped 2016, last operated 20 December 2022 Including 5 Ton Wellman manipulator Main Features 1 - Rated force: 2,500 T 2 - MAX Force: 2,750 T 3 - Slide speed: 56 mm/s at 2,000 T 45 mm/s at 2,500 T 4 - Number of strokes/min in levelling cycle at 400 T: 72 strokes/min 5 - Slide stroke: 1.525 mm 6 - Passage between columns: 1,850 mm2 7 - Maximum opening without removing the tool holder: 2,800 mm 8 - Ejecon in the lower table: stroke of 610 mm and force of 170 Tons 9 - Lower table sliding by cylinder: capacity of 3 tools 10 - Posioning of the slide as well as force and speed are controlled by a programmable controller 11 - Development and storage of programs at the workstaon on a microcomputer

weight max.: 800 kgworkpiece length: . mmwork piece width: . mmstroke: 500 mmtotal power requirement: . kWweight of the machine ca.: 5 tdimensions of the machine ca.: 3x1,6x2 mElectric drive control block is missingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 2500 kgworkpiece length: . mmwork piece width: . mmstroke: . mmtotal power requirement: 45 kWweight of the machine ca.: 15,7 tdimensions of the machine ca.: 4,8x2,34x3,65 mElectric drive control block is missingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stroke: . mmweight max.: 300 kgspeed: . m/mintotal power requirement: . kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: . mLoad capacity max 30 KNLoad moment 50 KNmTilt moment 93 KNmThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshop.You want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 kgworkpiece length: . mmwork piece width: . mmDrive: elektr. total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Producer: HUTA ZYGMUNT, Model: MPM 6300B, Origin: Poland, New in: 1978, Force: 2500 kGm, Stroke of ram: 850 mm, Space between shears: 650 mm, Length of die seat in ram: 650 mm, Length of die seat in cushion: 900 mm, Max. weight of top die: 800 kg, Min. die height: 300 mm, Strokes/min: 100,

: Krups A100 : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1250 , 640

HYDRAULIC DOUBLE-ACTING DIE FORGING HAMMER HOU 160 equipped with ejector Blow energy (with installed upper die with nominal weight): 16 [kJ] Nominal weight of upper die: 100 [kg] Blow frequency at nominal capacity approx. 95 [1/min] Ram velocity: 5 [m/s] Ram depth: 460 [mm] Ram weight: 1250 [kg] Ram stroke max.: 640 [mm] Ram stroke min. to reach max. blow energy (distance billet to upper die): min. 480 [mm] Max. die height without dovetails (incl. billet): 320 [mm] Min. die height without dovetails: 160 [mm] Daylight between guides: 580 [mm] Width of frame base: 2290 [mm] Depth of frame base: 1250 [mm] Frame weight: 24 [t] Total weight approx.: 32,5 [t] Total mass to be absorbed approx.: 33 [t] Moving mass approx.: 1350 [t] Height above floor level (assuming insert height 700 m) approx.: 4310 [mm] Total height approx.: 5000 [mm] Main motor capacity (with 400 V / 50Hz) ...

Pneumatic air forging hammer STANKO MA4129 Weight of the falling parts: 80 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 140 kg/m Distance from ram axis-to-frame: 300 mm Anvil dimensions: -Length: 130 mm -Width: 63 mm -Anvil height above the floor: 800 mm Diameter of working cylinder: 250 mm Diameter of compressor cylinder: 260 mm Stroke run: 385 mm Optimal stamping section of work-piece: -Square: 60 mm -Rounded: 80 mm Overall dimensions mm: -Length: 790 mm -Width: 1566 mm -Height: 1900 mm Weight of the hammer with an anvil-block: 3100 kg Price 3100 EUR

Pneumatic air forging hammer Stanko MA4132 Weight of the falling parts: 196 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 330 kg/m Distance from ram axis-to-frame: 340 mm Anvil height above the floor: 750 mm Stroke run: 460 mm Striking area: 75x190 mm Motor: 15kW Overall dimensions mm: -Length: 930 mm -Width: 1860 mm -Height: 2160 mm Weight of the hammer: 3450 kg Weight of anwill 1650 kg Price 3800 EUR

Max mass of drop parts 150 kgs. Price 3400 EUR

Offer 04446 Specifications: - Total width approx. 950 mm - Working surface length / web length approx. 420 mm - Working surface depth / web depth approx. 150 mm - Compression foot approx. W 120 x D 125 x H 140 mm - Total depth approx. 280 mm - Round horn approx. 250 mm - Square horn approx. 260 mm - Round hole in the track approx. 22 mm - Through-square hole in the track approx. 25 mm - Anvil height approx. 345 mm - Weight approx. 190 kg - Base frame W 520 x D 520 x H 345 mm - Weight 30 kg

Specifications: - Total width approx. 800 mm - Work surface length / web length approx. 120 mm - Working surface depth / web depth approx. 120 mm - Total depth approx. 100 mm - Round horn approx. 340 mm - Square horn approx. 340 mm - Anvil height with substructure approx. 820 mm - Anvil weight approx. 65 kg - Substructure approx. W 420 x D 420 x H 300 mm - Substructure mounting hole 85 mm - Weight of substructure approx. 35 kg

length: Spitze/Spitze 715 mmwidth: 125 mmheight: 280 mmheight: gesamt 830 mmweight: ca. 75 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

old belt drop hammer in good condition with hand lever release Bär ca.450 Kg drive directly with mint gear motor, belt and hammer stand. incl. used new gear motor weight compl. approx. 8 to.

Manufacturer: Wagner (SMS MEER) Type: SP 1ZO 1000 YOM: Revamped 2006 and 2019 REVAMP REPORT 2019 3.2. Mechanical works 3.2.1. Supplies and Achievements Supply and machining of 4 guiding columns • Material 42CD4V + CPCU 3.1, 0330 x length 6300 from raw forged, treated, dress and owned • Central threads and external thread • The centering bearings will be pre-machined to a rough dimension and finished according to diameters obtained aer retouching on the lower windchest and the upper yoke. Refurbishment of the lower bedstead: • Cast steel • Weight of 10,600 Kg and dimensions of 3500 x 3174 • 1050 Mounng on boring machine with balancing and geometric and dimensional checks • Retouching of the 4 lines of bores with 0330/332 (Rework of a maximum of 1mm/rays) • Dressage of inferiors and superiors • Retouching of 2 sides with 0340H7 and Ø330H7 (mini) • Retouchin ...

ZIEGLER C41-20A - air forging hammer Hammer weight: 20 kg Strokes: 270/min Lifting height: 200 mm Projection: 180 mm Cylinder diameter: 115 mm Hammermasse: 90 x 50 mm Engine power: 2,2 kW Voltage: 400 V Dimensions WxHxD: 460 x 1110 x 820 mm Weight: 380 kg Equipment: Hand - and foot operation, integrated Ambos Base optional