subcategories
(3rd category level)
Manufacturer:
(Category: 109)
spindle diameter: 125 mmx-travel: 2000 mmy-travel: 1600 mmControl: Siemens 840 C z-travel: 1400 mm: 600 mm : ja total power requirement: 40 kWweight of the machine ca.: 27 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 24093 Technical data: - Rivet shank diameter max. 6 mm - Feed force 1200 daN - Rivet time setting 0 - 10 sec - Projection 140 mm - Table size 250 x 175 mm - Installation height / table height adjustable - Stroke 40 mm - Operating pressure 5 bar - Pressure reducer - Drive 400 V / 0.6 / 0.75 kW - Space requirement approx. W 500 x H 1650 x D 650 mm - Weight approx. 480 kg
Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible.
A custom-built Schuster groove machining machine is available. Components: separation magazine, centering unit, end machining insertion end, round groove milling unit, 90° turning unit, trapezoidal groove milling unit, groove deburring unit, sawing unit, end machining shaft, insertion end deburring unit, inspection and carrying unit and embossing unit. Overall system dimensions X/Y/Z: approx. 8000mm/2400mm/2500mm, weight: approx. 13000kg. The electronics were overhauled in 2015. Including coolant tank and chip conveyor. Documentation available. An on-site inspection is possible.
A modified MECO internal keyway slotting machine is available. Keyway width range: 4mm-45mm, max. square keyway diameter: 36mm, max. hexagonal keyway diameter: 36mm. The machine was modified and can now slot square and hexagonal keyways. Documentation available. An on-site inspection is possible.
Tube bending machine Type: ELECT 52 Manufacturer: BLM Year: 2020 bent only 5,000 parts Control: Simens Simotion CNC 9 axis Max bending diameter: 52 mm Technical data see pictures With following tools-sets: D20 tube CLR40 + variable bend D25 tube CLR67,5 + variable bend D40 tube CLR40 25x25 tube CLR75 Extended version – it can bend up to 6m long tubes Condition of new machine, under power Find more here - / Contact us at -
CNC horizontal boring machine Type: WHN 13.8 B Manufacturer: TOS Year: 1987 In 2026 control replacement for Heidenhain TNC 530 X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Spindle diameter: 130 mm Spindle taper: ISO 50 Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - / Contact us at -
CNC tube banding machine Type: ELECT 52 Manufacturer: BLM Year: 2016 Fully electric dual-direction tube bending machine (9-axis) Control: Siemens SIMOTION Cycle hour counter: 7344 Number of parts produced: 5143 Mandrel rod set length: 4.2 m + extension of usable length to 4.5 m 3D visual programming system (VGP3D) – software for 3D graphical programming with feasibility analysis and bending process optimization B-RIGHT – automatic springback and elongation correction BOOSTER 20 – pushing booster with 2000 kg force Machine toolings: bending tools for tubes: Ø17.2 (r-68.6 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters + mandrel Ø21.3 (r-70.7 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters Ø26.9 (r-83.5 mm) fixed and variable radius + collet (pinza) + clamping plate + adapters + mandrel Ø33.7 (r-107 mm) fixed ...
CONTROLS CNC controls TECHNICAL SPECIFICATION current generation (max): 3600 A Table-size : 660 mm Table-size : 540 mm Working head: electr.clamping surf.: 375 mm .. x: 545 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 2560 mm total height: 2870 mmThe precision electrochemical metal machining (PECM) process is the further development of electrochemical countersinking. High-precision tools can also be machined from super alloys (Inconel, Hastelloy, etc.) and PM steels without process-related tool wear.Natural granite machine frameWorking area 800 mm x 640 mm (W x D)Machine table 660 mm x 540 mm (W x D)Maintenance-free precision work axis with direct driveFixture attachment via 6 T-slot rails (M10) in the machine tableReal-time system for process control and short-circuit detecti ...
Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible.
An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.
This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details.
Manufacturer: Perforex Model: BC 1007 HS Type of Machine : Milling Machining Center Find more here - / Contact us at -
Kaltenbach Saw Column Drilling Machine Alzmetall Welding machine Kemppi Pulse welding machine
CNC lathe Type: Style 510 Manufacturer: Style Year: 2021 Control: STYLE 2021 Turning Edition Swing over bed: 510 mm Swing over cross slide: 300 mm Center distance: 1350 mm Bed width: 330 mm Main motor power (S6): 11 kW Spindle bore: 80 mm Max. weight between centers: 750 kg Maximum spindle speed: 2500 rpm Spindle nose: D1-8 X and Z Axes Rapid traverse: 8 m/min Feed rate range: 2 m/min Tailstock Quill diameter: 80 mm Quill travel: 160 mm Quill taper: MT5 (Morse Taper 5) Turret: 8-position Machine in very good condition, fully functional, under power Find more here - / Contact us at -
CNC vertical machining center Type: V-50L Manufacturer: Leadwell Year: 2016 Control: Fanuc X: 1270 mm Y: 635 mm Z: 610 mm Spindle taper: SK40 Table: 1420 x 610 mm Max table load: 1000 kg New spindle in 2025 4-axis GSA with tailstock Internal cooling 20 bar Machine in good condition, fully functional, under power Find more here - / Contact us at -
Makra Edge Deburring Machine KEG 150 further inventory and ALL prices at: inventar-verkauf.de/id/alesco An efficient and durable edge deburring machine that is suitable for both professional and DIY enthusiasts. With a power of 1050W, this device offers outstanding performance for all kinds of deburring tasks. The infinitely variable speed control allows a maximum speed of up to 25,000 rpm, which enables precise and fast deburring work. The device is used, but has a long service life due to its robust construction and excellent performance. The KEG 150 is a versatile and powerful tool that meets all your edge deburring needs.
Tapping machine on mobile worktop further inventory and prices at: inventar-verkauf.de/id/alesco The used threading machine, ideal for any workshop, combines high performance and ease of use. The mobile worktop makes it easy to move and can be used anywhere. Technical data: Possible thread size: M3 to M16 Spindle speed: 300 rpm Incl. 5-6 safety slip clutches Not only is it sturdy and durable, but it's also extremely versatile. It's perfect for a variety of applications and materials, from steel and stainless steel to aluminum and plastic. The device is used, but still in very good condition and fully functional. With solid construction and high reliability, this tapping machine is an excellent value and a smart investment for any workshop.
Reebow auto stacking machine Automatic extraction and sorting machine (auto-stacking machine inclusive of control softwareV.10） Specification: 1. Strip off 5 loves/time (clamp type machine) 2. For nitrile glove production line with maximum speed of 160pcs/minute. 3. It can be used for 2.6~5.5g nitrile glove 4. Entitle to fulfill nitrile glove length 240±10mm if interested kindly contact; F31 Ms Aqilah (0176742799) Email: naqilah_m@topglove.com.my
A Mepac mold turner for facilitating maintenance and repair work on tool molds is available. Load capacity: 7000kg, rotation angle: 90°, machine dimensions X/Y/Z: approx. 1500mm/1400mm/1000mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.
used
GeneralCNC Grindingmachine; Control: Fanuc 32iB Rotary dresser (with diamond, for O.D./face)Rotary dresser (with diamond, for O.D./face) Rotary dresser has multiple diamonds, so it has a longer life than a single point dresser. It is not applicable to dress a back face of a wheel. When CBN wheel is used, also selecting Rotary dresser with AE sWheel rear face dresser (combination use with rotary dresser)Wheel rear face dresser (combination use with rotary dresser) This option helps to dress a rear face of a wheel which cannot be ground with a rotary dresser. Please consider selecting this option when a rotary dresser is selected.Clamping fixture for face plate (3 pcs. for clamping, 3 pcs. for centering)Clamping fixture for face plate (3 pcs. for clamping, 3 pcs. for centering) 3 pcs. of face clamper and 3 pcs. of centering adjuster for face plate. It is suitable for clamping flange sh ...
CONTROLS CNC controls WENZEL TECHNICAL SPECIFICATION x-Axis: 650 mm y-Axis: 750 mm z-Axis: 500 mm table surface (left-right): 710 mm .. width: 1160 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1650 mm space requirements -front/back-: 1380 mm total height: 2590 mm total weight approx.: 1340 kgDelivery includes:- HT400 WPC2040 computer trolley- HT400 control panel with standard cable- HT400 bracket (stone plate) RAL7016- PC standard 4x RS232- Black Swiss-style keyboard- 24 LED monitor- WENZEL machine documentation (USB)- WM|Quartis
An industrial inline cleaning system Dürr with a retrofit from 2013 is available. Batch dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 100kg, throughput capacity: approx. 8batches/h, throughput weight: approx. 800kg/h, max. bath temperature: 70°C, max. air temperature: 130°C, stations: 5, machine dimensions X/Y/Z: approx. 6250mm/2450mm/3000mm, control system: Siemens Simatic S7. The temperature control of the system is defective. Including a Geltz ion exchanger circulation system. Documentation available. An on-site inspection is possible.
This 3-axis Stratasys F370 was manufactured in 2016. It features a build volume with dimensions of 64.2 mm x 279.3 mm x 365.8 mm, allowing for versatile 3D printing capabilities. The machine is equipped with a dual-extrusion configuration for material and support, enhancing its functionality. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys F370 machine we have for sale. Contact us for further details.
voltage: 230 V: 200N dimension of workpiece: mmindex-arm vert. adjustable: xx mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 7,5 bar: 1,6 m³/mintotal power requirement: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
50 € 
