subcategories
(3rd category level)
Manufacturer:
(Category: 109)
- Power consumption: 26 kVA 3P400V /N/PE/50HZ; Fuse 63A - Compressed air connection: min. 5bar, max. 7bar - Extraction capacity: min. V = 1700 m³/h at Δp = -850 Pa min. 20 m/s, run-on time 15s The plant was cleaned, packed by the manufacturer, preserved and stored. It is complete and ready for operation. The facility can be visited at any time, by appointment.
Key data: 450 mm, 320 mm, 162 mm
For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!
power capacity: 63 / 93 kWvolt: 380 Vampere: 122 / 178 Aweight of the machine ca.: 0,5 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. bar length 1,500 mm Bar diameter 4 – 85 mm Weight approx. 400 kg UNUSED!
WWM TS 560/8-1 wire drawing machine was built in 2014 in Italy by WWM Technology Srl (now EJP Italmec Sp. z o.o.). The machine is used in the process of reducing the diameter of various types of wire by pulling it through a series of rollers. Once reduced to the appropriate diameter, the wire is confectioned directly onto a carousel or stand. The wire drawing line consists of the following machines: 1. WWM TS 560/8-1 wire drawing machine 2. WWM SV5 vertical static wire pay-off 3. WWM DSM 01 mechanical descaler 4. WWM AF 1000 wire coiler Wire feeding precision is ensured by the WWM wire pay-off, which consists of two tilting drums and a central column. It enables easy loading of material coils weighing a maximum of 3000 kg each, without stopping the drawing machine. During threading, the sheave and basket are lowered by a hoist with AC motor. The scale on the entire surface of t ...
ITALMEC TSR 300/1+6 wire drawing line was built in 2020 in Poland by EJP Italmec Sp. z o.o. The purpose of the line is to reduce the diameter of various types of wire, i.e. steel wire or welding wire, by pulling it through a series of rollers. This process is performed fully automatically, thanks to the use of two additional devices – a wire pay-off and a wire coiler. The wire drawing line consists of the following parts: 1. ITALMEC TSR 300/1+6 wire drawing machine 2. ITALMEC SB2C vertical static wire pay-off with compensator 3. ITALMEC AHSC 30 horizontal static wire coiler The ITALMEC wire pay-off with rotating arm precisely unwinds material from spools, coils or racks towards the drawing machine without stopping it. It is equipped with a special device that stops the machine in case of wire breakage and a compensator that accumulates the amount of wire necessary to stop the ...
A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible.
Spindle diameter 135 mm Morse 6 Attachment Cone Max. drilling depth in 1 pass 600 mm Min. distance spindle-column axis 485 mm Max. distance between spindle and mast axis 3,500 mm Min. distance from spindle to table 520 mm Max. distance from spindle to table 1,845 Min distance from spindle to plate - base 1,130 mm Max. distance from spindle to plate - base 2,455 mm Min drilling radius from column axis 820 mm Max. drilling radius from column axis 3,875 mm Max. drilling diameter 78 mm stroke 8,000mm stolle top 10.000X2.500mm
Key data: 28 kVA
Dismantled and stored induction hardening system from Steremat Elektrowärme GmbH type EA 15DA-2C-HF turntable with 50 magnetic workpiece holders and a manual workstation, generator from ELDEC type: HFG 15 DA, HF power 15KW, power consumption at full load 18 KVA, frequency range 150 - 350 kHZ
table-size: Breite: 800 mmtable-size: Tiefe: 350 mmworkpiece height: mmDimensions (L/W/H): 4600 x 3200 x 2500 mmweight of the machine ca.: 4,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 5.850 mmy-travel: 1.200 mmz-travel: 2.000 mmcontrol: HEIDENHAIN TNC 430 D table-size: 6.120 x 1.000 mmtable weight: 20.000 Kginternal coolant system feed: 20 barChip coveyor: inkl. handwheel: HEIDENHAIN HR-410 Tools changer: 60 fach/toolstaper ISO: ISO 50 engine output: 30 kWworking speed: 5.000 mm/minrapid taverse: 12.000 mm/minNumber of revolutions: 20 - 3.000 rpmtotal power requirement: 41 kWweight of the machine ca.: 31 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: - mmthreading length: - mmthroat: ca. 2000 mmtotal power requirement: 0 kWweight of the machine ca.: 0,2 tdimensions of the machine ca.: 1,30,82,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1300 mmy-travel: 610 mmz-travel: 600 mmtaper: Aufnahme 50 Axis: 3 control: Heidenhain 530 : : ja : 20 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 450 mmturning length: 380 mmcontrol: FANUC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: . tstroke: . mmtotal power requirement: . kWweight of the machine ca.: 3 tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 1008 rated current: 20 A voltage: 24 Vweight of the machine ca.: 3,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 3 - 10 mmTools speed: 120 - 600 U/mintable-size: 250 x 350 mmthroat: 250 mmvoltage: 380 Vthreading length: 80 mmtotal power requirement: 0,55 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,7 x 0,7 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 12 mm: max. 600 U/min.working area: max. 1100 mmengine output: 0,6 kWweight: 30 kgElectric tapping machines for M3 - M12 threads,8 pcs. quick-change chuck with slipping clutch.Adjustable via display:variable speed, adjustable depth, choice ofMain direction of rotation, torque.Documentation in English!Options:- Clamping table with T-slots: 990x700x800mm.- Magnetic base.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 1113-23 turning length: 500 mmturning diameter: 220 mmchip conveyor: ja kW: Werkzeugwechsler 12-fach spindle turning speed range: 5000 U/mintail stock: automatisch Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight: 200 kg: 931855500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Receiver capacity: 80 lworking pressure: 4 - 8 barAir consumption: 250 - 800 l/min.weight of the machine ca.: 36 Kg: 1020 x 460 x 520 mmMobile jet unit with extractionConsisting of:microfilterBoiler 80 litersBlasting gun with 2.5m supply hoseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja positioning automatic: ja documentation: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 40/80 U/min: 0025 voltage: 380 Vclamping: ja kWmiter: ja weight: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: max. 250 mmturning length: max. 900 mmcontrol: FANUC SERIE 0-T turning spindle: Durchlass 75mm chuck diameter: 250 mmturning speeds: 0-3700 U/mintransmission ratio: 2 tool numbers: 12 feed speeds: X/Z 15/20 mm/minquill stroke: 100 mmdiameter of quill: 110 mmtool adaptor: MK 4 coolant tank: 130 lweight - pallet system: 5500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 600 mmgrinding width: 205 mmx-travel: 600 mm: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M3 - M12 mm: 400 U/min.: 25 Nmair pressure: 6 - 8 barworking area: Radius 1000 mmweight of the machine ca.: 12 kgDemonstration machine!Pneumatically driven tapping machine for M3 - M12 thread with:- stable and flexible working arm.- 6 pcs. Quick-change chuck with slip clutch.Documentation in English optional:- Clamping table with T-slots clamping surface 900 x 600mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Receiver capacity: 2 x 37 lworking pressure: 4 - 8 barAir consumption: 170 - 500 l/min.weight of the machine ca.: 36 Kg: 1020 x 460 x 520 mmMobile beam unit (soda blasting)Consisting of:Nozzle set and moisture separatorBoiler 2 x 37 litersBlasting gun with 2.5m supply hoseSoda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width: 1000 mmweight: 88 kgheight: 390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 3 Stück Dimensions (L/W/H): siehe Bilder mmweight of the machine ca.: . tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 0 mmy-travel: 0 mmtable length: 600 mmtable width: 400 mmtotal power requirement: 2 kWweight of the machine ca.: 1500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
