x-travel: 5.300 mmy-travel: 1.500 mmz-travel: 2.000 mmsurface area: 6.000 x 1.200 mmtable height: 925 mmfeeds: 10 - 6.000 mm/minrapid traverse X- and Y-axis: 15.000 mm/minrapid traverse Z-axis: 10.000 mm/mina-axis: +45 bis -225 °b-axis: +165 bis -180 °power capacity: 28 (S1) kWpower capacity: 38 (S2) kWTorque: 1.880 (S1) NmTorque: 1.385 (S2) Nmturning speed range: 60 - 5.000 U/minclamping capacity max.: 8.000 kgexternal spindle dia. in forward position: 140 mmspindle diameter in front bearing: 90 mmtaper: SK 50 DIN 69871 Bolt: DIN 69872-B control: HEIDENHAIN 530 transmission ratio: 2 Überholt 2021The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2500 mmy-travel: 2500 mmz-travel: 1000 mmcontrol: Heidenhain TNC 426 PB table-size: 3000 x 1250 mmdistance between columns: 2000 mmrapid travel x/y/z: 15/12.000 mm/minfeed: 5 m/minmilling head: Orthogonal UDG milling head -swivable +/-: 2,5 °taper ISO: 50 spindle turning speed range: 50 - 2.000 U/mintransmission ratio: 2 Tools changer: 10 fach/toolsInternal cooling system: 15 barspindle drive: 30 kWtable weight: 10.000 Kghandwheel: HR-410 total power requirement: 44 kWweight of the machine ca.: 24 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 8.000 mmy-travel: 3.800 mmz-travel: 2.100 mmControl: HEIDENHAIN iTNC-530 table-size: 8.500 x 2.500 mmdistance between columns: 3.100 mmrapid travel x/y/z: 15/12.000 mm/minfeed: 5.000 m/minmilling head: Automatisch Drehung 4/5 number of spindle speeds: 4.000 U/min/rpmspindle drive: 37 kWtransmission ratio: 2 Stufentable weight: 35.000 Kgdistance spindle /table: 500-1.750 mmrapid travel x/y/z: 10.000/12.000 mm/minfeeds:: 7.000 mm/mindimensions of the machine ca.: 19.370 x 5.850 x 5.970 mmtool change unit: 30 pos.weight of the machine ca.: 93 t- 5 AXIS BRIDGE TYPE MILLING MACHINESMax height table to underside bridge 2.100 mmMin/max distance table to spindle 500-1.750 mmRapid Feed (X Axis) 10.000 mm/minRapid Feed (Y,Z Axis) 12.000 mm/minMax. Working Feed 7.000 mm/minAutomatic head C5 E INCLUDEDB-Axis head swivel ± 190ºC Axis head rotation ± 360ºSpindle ...
x-travel: 2.800 mmy-travel: 1.200 mmz-travel: 1.500 mmControl: HEIDENHAIN TNC-426 table weight: 24.000 Kgrapid taverse: 12.000 mm/minworking feed: 5.000 mm/mntable-size: 4.600 x 1.000 mmtaper: ISO-50 Turning speeds:: 20 - 3.000 U/mintotal power requirement: 30 kWweight of the machine ca.: 28.000 kg-Hydraulic Tool Clamping-INCLUIDO-CE Certificate-INCLUIDOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2.000 mmy-travel: 1.200 mmz-travel: 1.500 mmControl: HEIDENHAIN TNC 640 V- travel: 1.000 mmrapid traverse feeds: 20.000 mm/minNC- rotary: rotary table dia.: 1.500 / 1.800 mmworkpiece weight max.: 10.000 / 5.000 kgtable turning speeds: 400 mi U/minpower capacity - table: 28 kWTorque: 8.400 NmMain spindle: turning speeds: 3.000 / 5.000 min/-1 U/minpower capacity - milling spindle: 28 / 34,5 kWtool taper: HSK 100 T swivellable: 0,003 °Torque: 1.316 0Tools changer: 40 postotal power requirement: 85 kWweight of the machine ca.: 30 tdimensions of the machine ca.: 7.700×7.300×4.200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3.000 mmy-travel: 1.600 mmz-travel: 1.200 mmcontrol: HEIDENHAIN iTNC530 HSCI B-axis (swivelling head): +/- 100 °C-axis (milling head rotation axis): +/- 240 °feed and rapid traverse: : rapid feed Y,X,Z: 40.000 m/minRapid traverse B- and C-Axis: 50 rpmAccelerations (X, Y and Z): 4 m/s²Machine table:: : Clamping surface: 3.500 x 1.750 mmT-slots: 27 x 22 mm H12 T-slot - distance: 125 mmmax. workpiece load: 7.000 kg/m2Max. distance table to spindle nose: 1.356 mm2-Axis Fork Milling Head T21C: turning speed range:: 10- 24.000 min-1Drive power (S1/S6):: 42/50 KWTorque (S1/S6):: 67/84 NmTool bore: HSK-A 63 tool magazin:: : number of tools: 50 tool holder: DIN 69873 HSK A63 Max. Ø tool: 115 mmmax. tool-Ø adjacent slots free : 125 mmmax. tool length: 300 mmmax. tool weight: 12 kgcoolant equipment: : tank capacity: 1.400 lconnected load: voltage: 3x 40 V 50 Hz power requirement: ...
x-travel: 3.400 mmy-travel: 1.250 mmz-travel: 2.000 mmControl: TNC-430PA table-size: 4.700 X 1.200 mmV- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Gradmain drive: 37 kWChip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos.milling head: Automatic Head 45º weight of the machine ca.: 35 t- Automatic Head 45º INCLUDED- Automatic Head 45º 0.001º/0.001º- Head 45º Max. Speed 3.000 rpm- 45º Head Taper ISO-50- Twist Head Contiuous INCLUDED- Twist Head Max Speed 3.000 rpm- Twist Head Taper ISO-50- Ram with Quill - Quill Diameter 150 mm.- Quill Taper ISO-50- Pick up station AITEK for 45º and Twist Heads- Rotary Table ZEATZ Ø 1200 INCLUDED- RENISHAW MP 16+SP2/1The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 5.000 mmy-travel: 3.750 mmz-travel: 1.250 mmControl: iTNC-530 HSCI table-size: 5.200 x 2.200 mmdistance between columns: 3.000 mmfeeds: 50.000 mmfeeds: 30.000 mm/minmilling head: 0.001º/0.001º tool taper: DIN 69871 AD 50 number of spindle speeds: 6.000 U/min/rpmtransmission ratio: 3 spindle drive: 43 kWtool change unit: 20 - fach ( Vertikal) Internal cooling system: 20 barChip coveyor: 2 handwheel: HEIDENHAIN HR-520 total power requirement: 122,89 kVAweight of the machine ca.: 33 tMeasuring system: M&H PS 20.41 Headstocks:Universal Auto Indexing Head 45º 0.001º/0.001ºTaper DIN 69871 AD 50Spud ISO 7388-2 B 50Spindle speed 6.000 rpmSpeed ranges 3Main spindle power 43 kWDirect output head reduction 1:2,29 INCLUDEDTaper DIN 69871 AD 50Spud ISO 7388-2 B 50Spindle speed 2.000 rpmAutomatic support for automatic head change (direct exit head) in the u ...
