subcategories
(3rd category level)
Manufacturer:
(Category: 109)
Arlo Ø 800 x 3000 mmDistance between centers: 3000 mm Swing over bed: 800 mm Swing over cross-slide: 520 mm Swing in gap: 1000 mm (300 mm length) Diametre of main spindle bore: 100 mm Power on main spindle: 11 kW Number of speeds: 6 > 800 rpm Length: 5225 mm Width : 1480 mm Height: 1650 mm Weight: 5 ton
3 driven rolls conical bending overload protection hardened rolls 2 digital readouts for positioning or bottom rollsNumber of rolls: 3 rolls Roll capacity cold: 2050 x 25 mm Roll dia upside: 320 mm Dia under roll - side rolls: 310 mm Power needed: 22 kW Length: 4600 mm Depth: 1950 mm Hight: 1750 mm Weight: 10,5 ton
Reconditioned machine fitted with Elgo CNC control for bending angle Also equipped with 2 digital readouts for positioning of lower table Emergency cord at the front Foot pedal for semi-automatic use Bending radius (R) = 1.5 E - 10 mm on 3 meter length - 12 mm on 2 meter length - 15 mm on 1 meter length Bending radius (R) = 2 E - 12 mm on 3 meter length - 15 mm on 2 meter length Pre-bending - 15 mm on 3 meter length - 20 mm on 2 meter lengthType: hydraulic Max worklength: 3050 mm Max tickness: 12 mm Distance between clampblock -- ram: 700 x 500 mm Eletric motor (power): 25 HP Length: 4300 mm Depth: 2300 mm Hight : 2300 mm Weight: 15 ton
Type: SAR400 - self-aligning 1 driven unit 3 non-driven units diameter of wheel: 370 mm
pressure: 20 - 600 kNadjustment of rolling slide: 2 x 90 mmdiameter of rolling spindle: 120 mmroll spindle height over machine bed: 200 mmControl: SIN 840 D taper length of the roll spindle: 200 mmrolling spindle turning speeds: 0 - 34 1/mintorque per rolling spindle: 6.160 Nmpower capacity: 2 x 8,4 kWdistance between rolling spindles: min. 271 / max. 368 mmrolling tool outer diameter: max. 300 mmtotal power requirement: 26 kWweight of the machine ca.: 7,1 tdimensions of the machine ca.: 9,70 x 4,50 x 3,80 mCNC machine for gear cold rolling / thread rollingFelsomat loader cellComplete housingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 4570 output: 1,9 kW voltage: 380 Vfrequency: 50 Hzcurrent intensivity: 9 Aturning speeds: 3.000 U/minrotation weight: 400-450 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 1475 turning speeds: 500 U/minelectric control: ja : Kennzeichnung vorhanden weight of the machine ca.: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 1.000 mmgear width: 500 mmmax. module: 2 min. module: 50 Control: Klaassen table load of rotary table max.: 3.000 kpdia. of 3 jaw chuck: 365 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 2,85x1,5x2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 26327 Technical data: - Length approx. 2000 mm - Width approx. 1000 mm - Panel thickness approx. 170 mm - Table height 840 mm - 4 height-adjustable feet - Weight approx. 1200 kg
Offer 26377 Technical data: - Measuring control plate according to DIN 876 / 00 - Length approx. 1200 mm - Width approx. 800 mm - Panel thickness approx. 160 mm - Height-adjustable table height with cabinet base approx. 910 mm - Cabinet base with 1 door + 4 drawers - Drawer width 550 mm - Weight approx. 500 kg
Bous Waschfix cleaning and degreasing system For sale is a professional, industrial parts cleaning system / washing system of the type "Waschfix". The system is ideal for workshops, production companies or metalworking companies for the thorough cleaning, degreasing and care of components and workpieces. The system is robustly built and has an external, high-quality pump and stainless steel filter unit for cleaning the washing medium as well as a clear control system. The device cleans highly efficiently using a hot water spray (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, handling is absolutely safe and uncomplicated. Technical data Manufacturer: Bous Type: Waschfix Production number: 18251 / 2001 Capacity: 120 litres Permissible cleani ...
Powder Coating Booth with Filter Trolley & Fluid Bottom For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. It is the proven MRS system (Multirecover System), which ensures highly efficient powder recovery (overspray extraction) and clean work in the workshop. The system is extremely robustly built and is ideal for manual operation (hand coating) thanks to the generous hand coating opening. Technical data & connected loads: • Manufacturer: Gema Volstatic AG • System / Type: MRS Cabin with Filter Trolley and Fluid Bottom • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase current) • Compressed air connection (inlet pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: water vapour content max. 1.3 g/m³, oil content max. 0.1 ppm • Comp ...
Powder coating booth with multicyclone and post-filter For sale is a professional complete industrial system for powder coating: A Gema Volstatic powder coating booth of the type MRS (multi-cyclone recovery system with post-filter). The system stands for the highest Swiss quality, extreme robustness and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideal for industrial companies, powder coaters or workshops looking for a high-performance and reliable system. Technical data • Manufacturer: Gema Volstatic • Type: MRS (multicyclone and post-filter system) • Electrical connection: 3 x 380 V / 50 Hz • Equipment: Cab substructure with inlet, hand coating opening and gun driving slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection ...
Bous Waschfix Industrial cleaning and degreasing system The system is ideal for workshops, production plants, mechanical engineering or automotive companies for automatic and thorough cleaning and degreasing of workpieces, machine parts and tools. The device cleans highly efficiently using a hot water spray (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, handling is absolutely safe and uncomplicated. • Integrated ultra-fine filter for a longer service life of the wash water and cleaner cleaning results. • Integrated drain pump for effortless pumping of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Technical data Manufacturer: BOUS Cleaning & Degreasing Systems Type / Model: ...
Key data: 850 °C
Promeos Industrial Gas Oven 850 °C For sale is a powerful gas-powered PROMEOS industrial chamber furnace, built in 2018. The plant reaches a maximum furnace temperature of 850 °C and has a nominal heat output of 300 kW. According to existing technical data, operation is planned with natural gas types H, E and L as well as propane. The furnace has a lifting gate and is suitable for industrial heat treatment and production processes. Technical data Manufacturer: Promeos Plant name: BA 31010.0561.0000 Year of manufacture: 2018 Max. oven temperature: 850 °C Nominal heat output: 300 kW Burner heads: 2 × (3 × 40-03 CEO) Fuel: Natural gas type H, E and L / propane Gas connection pressure: 100 mbar Propane consumption: approx. 11 m³/h Combustion air requirement: approx. 335 m³/h Exhaust gas mass flow: approx. 453 kg/h Air number: 1.35 ± 0.05 NOₓ a ...
Key data: 750 °C
PROMEOS Gas Chamber Furnace For sale is a gas-powered industrial furnace with a maximum furnace temperature of 750 °C and a stated nominal heat output of 40–80 kW in total. The plant is designed to run on natural gas or propane and has two ECO 03-40 burner heads. The stove dates from 2016. The last known maintenance took place in 2021. Equipment and features Gas-powered industrial furnace plant Maximum oven temperature of 750 °C Two burner heads Operation with natural gas or propane according to technical specifications Electrical connection with 400/230 V Industrial design Technical data Manufacturer: PROMEOS Plant name: BA 31010.0484.0000 Year of Make: 2016 Maximum oven temperature: 750 °C Burner heads: 2 × ECO 03-40 Nominal heat output: 4 × 10–20 kW Fuel: Natural gas type H, E and L / propane Gas connection pressure: 50 mbar Propan ...
Key data: 800 °C
Padelttherm HGU 9408/800 Bogie Hearth Convection Oven For sale is a professional Padelttherm heat treatment system / bogie hearth convection furnace type HGU 9408/800 The plant was used for the heat treatment of aluminium housings and is designed as a gas-heated bogie hearth furnace with circulation. Two chain conveyors are also part of the documented overall system. Technical data Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of Make: 2019 Design: Bogie hearth convection furnace / heat treatment plant Application: Aluminum housing Temperature / Heating Capacity - Max. permissible oven room temperature: 800 °C - Working temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. gross operating weight: 4,900 kg - Heating medium: LPG - Lower calorific value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar - C ...
This 3-axis Hexagon Global S 05.07.05 was manufactured in 2021, featuring a measuring range of X 500mm, Y 700mm, Z 500mm. It includes an indexable swivel head, HH-AS6-T5, and an HP-S-X1S touch probe with a standard styli set. Ideal for precise measurements in extended temperature ranges (16-26 °C). If you are looking to get high-quality measuring capabilities consider the Hexagon Global S 05.07.05 machine we have for sale. Contact us for more information.
Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B) Auction-ID: A1-40407-121
18 € 
