Manufacturer:
(Category: 101)
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: TNC 426M HeidenhainMain spindle:: turning speed range - main spindle: 20 - 9.000 min/-1power capacity - main spindel: 9 / 13 kWmax. Torque: 57 / 82 Nmtool taper: ISO 40 DIN 69871swiveling-rotary-table:: table diameter: 700 x 500 mmswivellable: B: 105° (-10°/+95°) man.rotatable: 360° man.max. table load: 200 kgnumber of T-slots: 7 T-slot - distance: 63 mmT-slot - width: 14H7 mmcenter hole: 30H7 mmTool-Presetter:: number of toolpositions: 16 pos.tool taper: ISO 40 DIN 69871max. tool length: 290 mmmax. tool weight: 6,0 kgmax. total weight: 50 kgfeeds:: feed speeds: max. 10.000 mm/minrapid traverse: 12 m/mininput unit: 0,01 mmtotal power requirement: 17 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 4,0 x 4,0 x 2,5 mDocuments: Chip-Tray: Coolantsystem: B-axis: man. C-axis: man. Swivel-Rotary-Table: Automat ...
x-travel: 550 mmy-travel: 305 mmz-travel: 460 mmControl: Sinumerik 808D adv. SiemensMain spindle:: turning speed range - main spindle: 10 - 10.000 min/-1power capacity - main spindel: 11 / 7,5 kWmax. Torque: 70 / 48 Nmtool taper: BT 40 work table:: table surface area: 800 x 320 mmmax. table load: 300 kgT-slots: 3x 14 x 100 mmdistance spindle /table: 100 - 600 mmTool-Presetter:: number of toolpositions: 12 pos.tool taper: BT 40 max. tool diameter: 70 mmmax. tool weight: 6,0 kgchange-time tool to tool: 7,0 secfeeds:: rapid traverse ( X / Y / Z ): 10 m/minfeed speeds: max. 10.000 mm/minrepeating accuracy: +/- 0,008 mmpositioning accuracy: +/- 0,01 mmtotal power requirement: 15 kVAweight of the machine ca.: 2,9 tdimensions of the machine ca.: 3,5 x 2,5 x 2,4 mDocuments: swarf management system: Coolantsystem: Automatic Tool Changer: test probe: RENISHAW - Primo CNC-MachiningCenter Ve ...
A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.
spindle diameter: 200 mmProcessing width on table: 6000 mmProcessing height on table: 3150 mmProcessing depth: 1985 mmSlide cross-section: 530 x 550 mmtable load: 20 tPlate field size: 16800 x 5500 mmtool taper: SK 60 total power requirement: kWweight of the machine ca.: 173 tdimensions of the machine ca.: m- Additional equipment Angle head large and small- The OB no. is: 22979- The table is the model S20 MP table Size: 2200 x 2500 mm- The processing width on the machine X -Way is 6000 mm- Including 6 plates 5600 mm x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 28 mm, 300 mm
SerrMac Drill TCO 28 Manufacturer: SerrMac (Italy) Year of Make: 2002 Machine Type: Column Drill / Bench Drill Drilling diameter (max.): 28 mm Drilling depth: 150 mm Projection: 300 mm Spindle mount: Morse taper MK3 Speed ranges: 205–325–1050 / 410–650–2100 rpm (via belt drive, 2 gears) Table size: approx. 500 mm length Construction: solid cast construction Drive: Belt drive with manual feed control
Key data: 700 mm, 420 mm, 380 mm
Specifications: Manufacturer: DMG MORI Type: Milltap 700 Year of Make: 2016 Control: Siemens 840D SL Travel: X 700 mm Y 420 mm Z 380 mm Switch-on hours: 32,722 h Program runtime: 24,284 h Spindle running time: 12,539 h Spindle Speed: 10,000 rpm Tool holder: DIN30 NC swivel rotary table Table load: max. 100 kg Swivel range A: -100/+120° Rotation range C: 360° Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tool Changer Conveyor IKZ Internal tool cooling with high-pressure system Preparation for automation
x-axis: 1350 mmy-axis: 1150 mmz-axis: 895 mmcontrol: HEIDENHAIN iTNC 530 turning speeds: 15000 U/mintool taper: HSK-A63 surface area: 1100 x 1000 mmmax. table load: 1600 kgnumbers of tools in magazin: 92 spindle drive: 30 / 38 kWA-Axis: -16 / +120 °total power requirement: 58 kWweight of the machine ca.: 12,6 tdimensions of the machine ca.: 5100 x 2300 x 3090 m2023 new Spindlemachine equipped with:- CNC Control Heidenhain TNC 530- swivel head, direct drive ‘High Torque’ motor- Autom. Tool change: 46-position tool magazine- High pressure cooling through spindle– Chip evacuator– Tool control with duallaser– Radio frequency probe– Airthrough spindle– APS(Advanced Process System) & ITC(Intelligent Thermal Control)- Renishaw probeMachine on: 6680h, active drives: 4876h, spindle: 2657hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1660 mmy-travel: 760 mmz-travel: 660 mmcontrol: Mazatrol M Plus table surface area: 2000 x 760 mmtable load: 1,0 trapid traverse: 24 m/minturning speed range: 7000 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 | |no. of tools in the magazine: 2 x 24 Stückweight of the machine ca.: 8,1 tdimensions: 4,2 x 3,2 x 2,8 mVertical Machining Center traveling coloumn- internal coolant- chipconveyor- ext, hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 700 mm, 420 mm, 380 mm
Specifications: Manufacturer: DMG MORI Type: Milltap 700 Year of Make: 2014 Control: Siemens 840D SL Travel: X 700 mm Y 420 mm Z 380 mm Machine hours: 52,616 h Spindle Speed: 10,000 rpm Tool holder: DIN30 NC swivel rotary table Table load: max. 100 kg Swivel range A: -100/+120° Rotation range C: 360° Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tool Changer Conveyor IKZ Internal tool cooling with high-pressure system Preparation for automation
CHIRON FZ18 S CNC machining center with SK40 rotary table integrated as 4-axis in the control system Control: SIEMENS NUMERIK 810 Not in operation since 2016
CNC machining center from Urban Control: Heidenhain Track Control iTNC 530 4-axis Travel x/y/z – axis 7200 /450 /590 mm Working range x/y/z axis 7000 / 400 /350 mm Weight 14 t Equipment: Robust basic structure as a welded frame construction Ball rail guide on all axes Milling spindle unit: 100-12000 rpm, tool holder SK 40 Drives: X-axis 50 m/min by rack and pinion drive Y/Z axis 25m/min by ball screw B-axis 9000°/min Control panel swivels Automatic central lubrication Moving tool changer for 12 tool holders SK40 Cooling emulsion plant, machine people, security fence Electronic handwheel integrated into the control panel Chip drawers, laser scanners, minimum quantity lubrication Technical data see pictures.
The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece probe renishaw RMP60. Centerline probing, simultaneous machining, chip conveyor. 20 tools. Table diameter 200mm. X and Y overhauled.
x-travel: 600 mmy-travel: 530 mmz-travel: 510 mmControl: M 730 BM MAPPS IVMain spindle:: max. spindle speed: 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 transmission ratio: 1 spindle diameter in front bearing: 80 mmwork table:: table surface area: 900 x 600 mmmax. table load: 800 kgT-slots: 6x 18 x 100 mmdistance spindle /table: 150 - 660 mmTool-Presetter:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 150 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: ca. 1,3 secchange-time chip to chip: ca. 3,45 secfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 30.000 mm/minTipp feed: 0 - 5.000 : 20 mm/mintotal power requirement: 30 kVAweight of the machine ca.: 6,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mDocuments: Chip conveyor: work light: Automatic T ...
bore capacity in steel (diameter): 28 mmthroat: 200 mmbore stroke: 105 mmtable surface area: 360x340 mmDistance spindle/table max.: 540 mmturning speed range - stepless: 120-3000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement.
Travel X/Y/Z: 1100mm/550mm/560mm, tool holder: BT40, spindle speed: 6000rpm, tool positions: 24, control: Mitsubishi. Documentation available. An on-site inspection is possible.
A CNC 4-axis universal milling machine DMG DMU 80 T is available. Travel X/Y/Z: 880mm/630mm/630mm, spindle speed: 12000rpm, spindle power: 15kW/10kW, tool holder: SK40, tool magazine: 32, table dimensions X/Y: 1250mm/700mm, max. table load: 600kg, infrared probe: Heidenhain TS 631. Machine dimensions X/Y/Z: approx. 7600mm/3350mm/2750mm, weight: approx. 8800kg, control: Heidenhain TNC 430. Including automation extension Promot. Documentation available. An on-site inspection is possible.
: 34 mm: 40 mm: 40 mm: MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,4/2,2 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection class IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads/min., (Tapping power dependent on spindle speed)Pos. 25.Coolant device B, consisting of: separate container (33 l), pump withMotor protection switch, complete fittingThe data for this ad was created with ModulM ...
used
Key data: 650 mm, 600 mm, 620 mm
From a current recycling we offer you a CNC machining center from the manufacturer AVIA, type VMC 650 V. Year of construction:2023 Condition: normal signs of wear Hours: Asking price: VHB Original price: 120.000 € Equipment / accessories / other information: x/y/z 650/600/620mm, Table 800x550mm 30 mm tool magazine Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: The sale is without warranty Subject to prior sale
x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmdistance spindle nose and table: 120 - 630 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 130 / 87 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/mintotal power requirement: 23 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mChip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probing: XYZ Operation mode ...
Max. drilling diameter ... 63mm Spindle holder ... Morse code 6. Machine weight ... 7100kg Max. vertical arm adjustment ... 950mm Spindle speed ... 11-2000 rpm Main engine power ... 5.5kW Total power requirement ... 8.5kVA The machine is in good condition, possible to test under power.
spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-travel: 1600 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 table load: 25 tfeed range: 10000 mm/minspindle turning speed range: 10 - 3000 U/minspindle taper ISO: 50 spindle motor: 37/46 kWrapid traverse: 10 m/minControl: Heidenhain TNC 640 total power requirement: 70 kWweight: 38 trange L-W-H: 8,5 x 8,6 x 5,5 mmEquipped with:- Heidenhein iTNC 640 CNC control & HR 510 handwheel- HUI 50 automatic milling head- 40-position tool changer (ISO 50)- B-axis in rotary table- Heidenhain optical scales- NC rotary table- Coolant system with paper belt filter, Coolant through Spindle 20bar- Chip conveyor- Heidenhain TS 460 measuring probe- Movable operating platform- Pfannenberg oil cooler- Central lubricationca 4450h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1000 mm, 510 mm, 450 mm
CNC control SEICOS (Sigma) 18M, speed range 120-12000 rpm, 22 / 18.5 KW Tool holder SK 40, tool magazine with 30 places, IKZ mt 15 bar, HSC machine package for precise milling at high feed speed Dimensions: Width x depth x height 2900 x 2400 x 2786 mm, weight approx. 8200 kg Please note: The machine is not usable, tool clamping of the SK 40 mount is defective. Tool changer can therefore not change.
Key data: 800 mm, 800 mm, 800 mm
3D path control Heidenhain iTNC 530, main drive 19 KW (100% ED), 28 KW (40% ED), Tool holder SK 40, chain magazine with 60 places, chip conveyor, rotating viewing disc, Coolant tank with 600 liters, IKZ with 40 bar, switchable to blowing air, universal milling head B-axis, NC rotary table 900mm x 700 mm, infrared touch probe Heidenhain TS 641, electronic handwheel, Operating mode 4, documentation with repair work available. Spindle hours Total 13,700 of which 680 hours on new spindle replaced 27.02.2024
