11,695 other metal working machines used for sale

230V

Diameter 100 mm/ for insert XDKT11/ unused and in original packaging

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

SICK WL14-2P430S02 Reflection Photoelectric Sensor, 1028719, Made in Germany

Fiessler Safety Curtain IR Receiver LSUWNSR3-1

ISA50 DIN79871 x 32mm/ including 72 matching collets/ diameter 32x6/8/10/12/16/20/25mm/ including Lista inserts and sorting board

Tialn coated/ 4-lipped/ shaft 10 mm

vice jaw width 120 mm; heavy sheet steel worktop, size approx 1020x700x47 mm; equipped with sheet steel back wall; without the glue clamps on the back;

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W

Max stroke 415 mm Closing speed 200 mm/s Max pressure 8 bar PR150 - Short Plug Bystronic PR150 x3100 (2005) Bending force: 150 tons (~1500 kN) Folding length: 3100 mm Passage between uprights: ~2550 mm Stroke (ram travel): ≈215 mm Maximum daylight: ≈550 mm Approach speed: ≈200 mm/s CNC control: Cybelec MODEVA 12 Machine weight: ≈10,000 kg Check the serial number and options to confirm the values.

New generation of compact laser markers, with motorized opening and protection sensor for safe operation. 20W power source (adjustable), marking field 110 x 110 mm. Motorized and manually operated Z axis, simple and effective focusing thanks to the double red light pointer. Air cooling, 220V power supply at 50 Hz. Minimum reproducible thickness 0.02 mm, speed up to 7000 mm/s. EZCAD2 software included. Item size 730 x 500 x 850 mm. Item weight 75 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 540 x 870 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance.

Content consisting of various screw clamps, angles and hand-held devices

Roller track 430 x 75 x 95 work table 300 x 80 x 90 Work table 202 x 90 x 90

Salvagnini S4 P4 CNC Punching and Bending Center. The machine is functional and ready for use. NC punching machine S4.30 is for processing metal sheets made of magnetic and non-magnetic material. Type: TC27155C+PRL3814F+DUF15+S4.30.H2.90. C1515. EI09. P2R36+ R121+ JOBS4P4. DIARIO+ MMACHNT Type: S4.30.H2.90.EI09.P2R36/C1515 System Configuration Voltage: 380V Frequency: 50 Hz Current: 119A Rated Power: 61 kW Working features: Length of the entrance panel: Max. 3048 mm, Min. 370 mm Width of the entrance panel: Max. 1524 mm, Min. 300 mm Diagonal of the entrance panel: Max. 3408 mm Length of the output panel: Max. 3048 mm, Min. 250 mm Width of the output panel: Max. 1524 mm, Min. 60 mm Max. sheet thickness for blanks with breaking strength 400N/mm2: 3.5 mm Minimum sheet thickness: 0.5 mm Production center type S4 with the following configuration: Scissor Table Type: TC27155C Motorized  ...

Power 1.5 kW, water cooling, wavelength 1070 nm, cleaning width 50 mm, power supply 220 V. 1. Metal surface rust removal/carbon steel rust removal/weld seam cleaning/metal surface paint removal/steel pipe paint removal/aluminium plate surface cleaning oxide film;  2. Laser cleaning technology refers to the use of high-frequency high-energy laser pulses to irradiate the surface of the workpiece, The coating layer can instantly absorb the focused laser energy, causing the surface oil stains, rust spots or coatings to evaporate or peel off instantly. It is a high-speed and effective cleaning method for removing surface attachments or surface coatings, and the laser pulse with a short action time, Will not harm metal substrates under proper parameters. Laser cleaning is a new technology based on the interaction effect between laser and matter. Different from traditional mechanical cle ...

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W

Manufacturer: Oskar Frech GmbH & Co. (Germany) Model: DAW 50 S DV Year of Make: 1998 Serial number: 159 904 Category: Hot Chamber Die Casting Machine (Zinc/Magnesium) Main data: Clamping force: 600 kN Hydraulic operating pressure: 70 bar Machine weight: approx. 4,500 kg Rated current: 34 A Power supply: 3x400 V / 50 Hz Control voltage: 24 V DC Control: FRECH DAWARIO control panel Equipment & Condition: Complete unit including control cabinet, hydraulic unit and control panel Robust cast and steel construction for long-lasting operation Control with monitor and keypad (older system, functional) Plant shows signs of use, oil and dirt residues Obviously complete, no significant missing parts visible Ideal for zinc or magnesium die casting of small to medium-sized components Hints: Year of construction 1998, classic industrial control (not modernized) Transport weight approx. 4 ...

Various tube parts and clamps

FESTO Sensor SOEG-RSP-M18-PS-S-2L 537699 AB B

Manufacturer: Meltec Industrieofenbau GmbH (AT) Model: ZC 200/250 Year of Make: 2003 Serial number: 1844/03 Category: Zinc Melting and Holding Furnace for Die Casting Machines Main data: Capacity: approx. 600 kg zinc melt Voltage: 380–480 V Power: 32.5 – 52 kW Current consumption: 49–63 A Frequency: 50/60 Hz Max. temperature: 450 °C Equipment & Construction: Robust design for continuous operation in die casting foundries Direct filling with zinc ingots or return material Designed for melting and keeping hot zinc for hot chamber die casting machines Compact design on steel frame Condition: Traces of wear and deposits of zinc melt visible Interior with residual material, boiler room heavily soiled Housing stable, electrical connection available Functional test recommended, no guarantee of operational readiness Hints: Ideal as an additional or replacement furnace for Frec ...

Equipped with Electrode holder with 2m cable; Grounding terminal 1.5 m; Cord length 1.50 m; chipping hammer; wire brush; Stepless regulator welding current 10-160 Ampere; Cycle of operation 10 minutes; Duty Cycle 35% 160A output; Product size 400x200x300mm (lxwxh); Product weight 2 kg; Power 160 W; Unused in box (Packaging size 500x300x400 mm (lxwxh), weight 6 kg)