subcategories
(3rd category level)
Manufacturer:
(Category: 109)
A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.
A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible.
DMF260/11 → Year of manufacture: 2011 Heidenhain TNC 530 Spindle SK 40 – 18,000 rpm Machine hours: 54,877 Spindle hours: 21,845 Condition: second-hand However, it is currently still in use and will be available in 2027 Find more here - .ucymachines/ Contact us at - sales@ucymachines
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, 2 doors, solid construction -Width: 950 mm -Depth: 420 mm -Height: 1950 mm -Shelves: 9 pieces, but only 2 mounting brackets -Door: lockable, without key -Weight: 67 kg
The machine is in good technical condition; it can be tested by prior arrangement.
IRLE IRD 1600 CNC End Machining Machine Manufacturer: IRLE Type: IRD 1600 CNC Year of manufacture: 2004 Control: max. Ø to be machined 1,625 mm min. pipe diameter to be machined 406 mm max. pipe length to be machined 13,200 mm min. pipe length to be machined 6,000 mm min. pipe wall thickness 12 mm max. pipe wall thickness in copying approx. 40 mm max. pipe wall thickness to be machined in CNC operation 70 mm max. pipe weight to be picked up 250 KN Height between hall corridor and pipe inlet 800 mm Total length of the machine approx. 24,000 mm Total width of the machine approx. 4,100 mm Total height from floor to upper edge of vise 5,000 mm Machine weight approx. 700 KN 01 - Intermediate bed with travel drive Bed length approx. 3,950 mm Bed width approx. 1,800 mm Bed height including chassis approx. 600 mm Travel speed on the foundation rails 500 - 5,000 mm/min. 01 - Inte ...
ERCOLINA MB 42 / Mandrel tube bending machine -CE - Identifier -Year of construction 2009 -Bending capacity / steel tube 42.4x3mm -Max. tube diameter aluminum / copper 54x2mm -Bending performance furniture construction tube 48x1.5mm -Solid material up to 30mm -Max. bending angle 210 degrees -Electronic control with digital display -Max. 30 x program memory -Programs with 9 x bends - Overload Protection / Yes - Operation: Double foot pedal ( bend - return) -Max. bending speed 2rpm -Incl. 1x tool -1.1 KW -Footswitch -Documentation Dimensions: LxWxH 0.5x0.6x1.2 meters / Weight 100Kg
CONTROLS CNC controls WORKING RANGE -WIRE CUTTING- worpiece length max.: 1050 mm worpiece width (max): 650 mm workpiece height (max): 420 mm X-axis travel: 500 mm Y-axis travel: 350 mm z-axis travel (vertical): 426 mm conical operation for max.: 30 ° U-axis travel: 140 mm V-axis travel: 140 mmWIRE SYSTEM wire diameter (min): 0.15 mm wire diameter (max): 0.33 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1940 mm space requirements -front/back-: 2300 mm total height: 2600 mm total weight approx.: 4200 kgFeatures:Automatic wire threading and rethreadingWater bath machine (fully immersed processing possible)AGIE Jogger hand box (operating unit)Travel: Up/Down ±70 mm
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, quick-change holder, turning tool holder, clamping holder, turning tool holder, lathe turret tool holder -Manufacturer: Kelch, tool holder steel holder -Socket: Ø 32 mm, bolt circle Ø 102x18 mm -Quantity: 1x holder available -Dimensions: 295/140/H110 mm -Weight: 8.8 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter -Type: R 265.1-100M -Hole: Ø 40 mm -Dimensions: Ø 105 x 50 mm -Weight: 2.3 kg
End mill, roller cutter, milling cutter, disc cutter, slot cutter -Manufacturer: Fette, roller end mills, disc cutters -Type: A175x20N -Hole: Ø 40 mm -Dimensions: Ø 166 x 18 mm -Weight: 2.5 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax, face milling cutter head, partially without indexable inserts -Cutting head: Widia type WIDAX M40 Ø 125 R-8 -Number of teeth: 8 -Hole: Ø 40 mm -Dimensions: Ø 130 x 62 mm -Weight: 3.7 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face mill -Manufacturer: Seco, Secodex Face milling cutter head without indexable inserts -Type: Secodex R257.1- 125 -Hole: Ø 40 mm -Dimensions: Ø 136 x 62 mm -Weight: 3.9 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax, face milling cutter head diameter 315 mm -Cutter head: Widia type WIDAX M45 Ø 315 R 16 -Number of teeth: 16 -Hole: Ø 60 mm -Dimensions: Ø 335 x 78 mm -Weight: 38.5 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widia, Indexable insert milling cutter, face milling cutter, cutter head without indexable inserts -Type: WIDAX Ø 123 mm -Hole: Ø 40 mm -Quantity: 2x milling heads available -Price: per piece -Dimensions: Ø 123 x 27 mm -Weight: 1.6 kg/pc.
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widia, Indexable insert milling cutter, face milling cutter, cutter head -Type: WIDAX 1185837 Ø 125 mm -Hole: Ø 40 mm -Dimensions: Ø 125 x 27 mm -Weight: 1.7 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head corner cutter -Type: Ø 160 mm -Recording: SK50 -Dimensions: Ø 160 x 250 mm -Weight: 11.2 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: Ø 167 mm -Hole: Ø 50 mm -Dimensions: Ø 167 x 62 mm -Weight: 5.9 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: UER 200-1-12 -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 200 x 62 mm -Weight: 8.7 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax Kelch, face milling cutter head diameter 270 mm -Recording: Chalice 178 03 M Ø60 SK50 -Cutter head: Widia type WIDAX M45 D.250 R 13 -Number of teeth: 13 -Recording: SK50 -Dimensions: Ø 270 x 235 mm -Weight: 30.9 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter -Type: R 265.2-200M -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 205 x 62 mm -Weight: 8.6 kg
Plastic 3D printer manufactured in 2018. This HP Jet Fusion 3D 4200 features a build volume of 380 × 284 × 380 mm and utilizes Multi Jet Fusion technology for efficient production. It is fully functional and has been in productive operation until June 2026, making it suitable for industrial production of functional end-use parts and prototyping. If you are looking to get high-quality 3D printing capabilities, consider the HP Jet Fusion 3D 4200 machine we have for sale. Contact us for further details.
GEKA BENDICROP 50 ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.L.U. The machine, designed for the comprehensive machining of steel parts, enables a wide range of operations to be performed in one place. This solution significantly improves the production process and reduces the need for additional machines. The GEKA BENDICROP 50 is equipped with 5 work stations for punching holes, bending flat bars, and shearing flat bars, angle bars and steel bars. Each station features high-quality, quick-change tools, which allow the machine to be adapted to current production requirements. The design, based on a rigid, durable frame, ensures high operational stability even during intensive use. As a result, the GEKA BENDICROP ironworker machine is an excellent choice for production plants and locksmith workshops. The total weight of the machine is approximately 1000 kg. Te ...
HEBÖ STM-5VDZ wrought iron machine was manufactured in 2014 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully functional. It was started up only for the purpose of testing, during which a single workpieces were produced. The HEBÖ STM-5VDZ is an excellent choice for artistic blacksmithing workshops. It enables the efficient production of decorative elements, which are used, amongst others, in fences, balustrades and metal furniture. The standard HEBÖ STM5 unit is designed for twisting bars with a cross-section of 35×35 mm and a maximum length of 1250 mm. The continuous speed adjustment enables the machine’s operation to be precisely adjusted to the type of part being produced, whilst the 8 kW drive ensures stable operation even during the most intensive use. Thanks to additional attachments, it is possible to perform many different operations a ...
