Manufacturer:
(Category: 102)
Highlights − Linear actuator for maximum precision, dynamics and cost-effectiveness − 6 + 2 axes, 2 Y-axes as standard − 2 tools in use at the same time − Thanks to the conversion kit, the machine can be used as an adjustable spindle stick Technical description I-J10010 GILDEMEISTER SPRINT 20|8 linear CNC Swiss Automatic Lathe TECHNICAL DATA: MAIN SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 1: 80 mm Max. speed: 10,000 rpm Nominal drive power: S1 3.7 kW SUB-SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 2: 300 mm Max. speed: 10,000 rpm Nominal drive power S1: 3.7 kW CNC-CONTROLLED AXES Rapid traverse speed: 40 (30) m/min (Y1 only) Acceleration max. X1: 10 m/s2 Feed force (S1) axis Z1,Z2,X2,Y2: 250 daN Feed force (S1) axis Y1: 500 daN Linear axis feed force X1: 60 daN SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 P ...
Highlights - CNC FANUC 32i - 6 linear axes - 2 programming channels - 2 electrospindles - C-axis standard for main spindle and sub-spindle - 25 Vehicle positions - 4 radial driven tools for slides 1 - 4 radial driven tools for slides 2 - Machining on the main spindle possible with 2 tools at the same time Technical description I-A1023 GILDEMEISTER SPRINT 20|8 CNC Swiss Automatic Lathe CNC CNC FANUC 32i TECHNICAL DATA MAIN SPINDLE Turning diameter max.: 20 mm Stroke Z1: 60 mm 180 (with option I-C1002) Max. speed: 10,000 rpm Nominal drive power S1: 2.2 kW SUB-SPINDLE Turning diameter max.: 20 mm Stroke X2: 220 mm Stroke Z2: 170 mm Max. speed: 10,000 rpm Nominal drive power S1: 1.5 kW CNC-CONTROLLED AXES Rapid traverse speed: 32 m/min Max. acceleration: 5 m/s2 Feed force (S1) axes Z1, Z2, X1, X2: 150 daN Feed force (S1) axis Y1: 370 daN Feed force ...
turning diameter over bed: 280 mmturning diameter over slide rest: 170 mmturning length: 600 mmweight of the machine ca.: 400 kgspindle passage: 26 mmspeeds: 55-2000 U/mintotal power requirement: 1,4 kWdimensions of the machine ca.: 1,5 x 0,8x 1,3 mIncluding EMCO SOD grinding supportIncluding EMCO 4-jaw chuckIncluding machine feetIncluding change gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3600 mmswing diameter: 4500 mmturning height: 1850 mmmax. workpiece weight: kgvertical adjustment of the crossrail: mmtravel -x axis: mmtravel -y axis: mmtravel -z axis: mmturning speed range: 0,6- 50 U/minpower capacity: kWmax. torque on the faceplate: weight of the machine ca.: 72 tdimensions: mverticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Parallel Lathe SCULFORT type MAXICAP 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T
Inv. Num. : 9058 Type: SPV 40 CNC Producer: CZ. TECH Created: 2008 Parameters: Control system: SIEMENS Table diameter: 533 mm Feed length X-axis: 550 mm Feed length Z-axis: 850 mm Max. turning diameter: 850 mm Max. workpiece height: 800 mm Max. workpiece weight: 800 kg Weight: 12500 kg
Inv. Num. : 9056 Type: SPRY 40 CNC-D Producer: ZPS Created: 1994, GO 2016 Parameters: Control system: Siemens Sinumeric 840D Maximum turning length: 300 mm Max. turning diameter: 110 mm Maximum main spindle power: 10 kW Spindle bore: 50 mm Max. rod diameter: 40 mm Weight: 2400 kg Equipment: Duplomatic tool head with rotary tools 3 meter pole holder
Offered is a precision lead and feed screw lathe: Center distance: approx. 1000mm, center height: 180mm, swing diameter over bed: 360mm, spindle bore: 35mm, spindle mount: D1-3 Camlock, spindle taper: MK5 (MT5), speed steps: 12 speeds, speed range: approx. 40-1800rpm, longitudinal feeds: 0.05-0.7mm/rev, cross feeds: 0.02-0.4mm/rev, metric threads: 0.4-7.0mm, inch threads (Whitworth): 4-56threads/inch. Inspection possible by appointment.
turning diameter: 250 mmturning length: 600 mmcontrol: FANUC Series 31i-Model A total power requirement: 23 kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: 2.880 x 2.130 x 1.990 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. The X-axis of the machine makes running noises. Documentation available. On-site inspection is possible.
Offered is a CNC vertical turning machine - pick-up system. Chuck diameter: approx. 160mm - 200mm, swing diameter: approx. 270mm, travels X/Z: approx. 500 - 600mm/approx. 160 - 200mm, max. spindle speed: 6000rpm, tool carrier: 12-station turret, drive system: Siemens SIMODRIVE 611, hydraulic unit: available, coolant system: including pumps and filter (One Eye Ind. magnetic filter installed), hinged belt chip conveyor. Inspection is possible by appointment.
Key data: 500 mm, 1000 mm, 2500 1/min
Lathe Voest Alpine Steinel WNC 500 S x 1000 Turning diameter 500 mm Turning length: 1000 mm Control system Sinumerik 810 T-GA 2 2 stage gearbox i = 4 Power: 37 KW at 100% ED Max. torque during turning: 1450 Nm Tailstock manual with clamping and coupling Speed max 2500 rpm Electronic handwheel For milling: Hydraulically swivelling servo motor with 720 Nm and max. 18.5 rpm 12-speed disc turret with driven tools max. 3000 rpm at 4 kw Tool holder VDI 40 Many VDI 40 tool holders for internal and external machining as well as driven tools, incl. some tools - e.g. internal turning steels otherwise without tools!
DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...
A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible.
turning diameter: 1500 mmturning length: 4500 (5500) mmcontrol: Siemens 840 Dsl max. workpiece weight between centres: 6000 kgtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: mCNC machine configured as a 4-way center lathe with full travel over the steady rests and superstructuresZ-axis travel (longitudinal slide) = 5000 mm (6000 mm with TAE3)X-axis travel (transverse cross slide) = 1000 mmY-axis travel (vertical movement) = 350 mmMaximum workpiece diameter = 1500 mmSwing diameter over cross slide = 1500 mmCenter distance = 4500 mm (5500 mm with TAE3)The cross slide and cross slide do not restrict the diameter range due to their lateral positioning on the lathe bed. Therefore, there is no associated diameter restriction over the cross slide/tool carrier.The cross slide unit, including the cross slide superstructure, can travel completely past the ...
Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench: 620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T
turning diameter over bed: 660 mmturning diameter over slide rest: 450 mmturning length: 2000- 2880 mmthroat: Ø 1200 x 880 mmHeight of centres: 330 mmspindle passage: 85 mmturning speed range: 10- 700 U/mintail stock: MK 5 transmission ratio: 24 tool holder: Multifix C dimensions: 3,5/4,4 x 1,45 x 1,1 mweight of the machine ca.: 4,2 tkonv. lathe with movable bed for long gap.- movable bed 880 mm- swing Ø in gap: Ø 1400 mm- 3- jaw chuck Ø 315 mm- facing plate Ø 800 mm- facing plate Ø 500 mm- rapid travers- some tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 820 mmturning length: 6000 mmcontrol: Siemens Si 840 D sl total power requirement: 155 kWweight of the machine ca.: 65 tdimensions of the machine ca.: 16350 x 3700 x 3850 mPurchase price EUR 1.550.000Time recording from Feb. 2025Operating hours = 38601 hMain spindle = 1958 hMilling spindle = 1760 hCNC control Si 840D slWorking area 6000 mmWorking height 1390 mmSwing diameter over bed slide/bed 820 mmX-axis travel +850 -25 mmZ-axis travel 6820 mmC-axis, smallest increment +/-0.001°Workpiece spindleSpindle head according to DIN 55026 A15Bathing through 160 mmFront diameter Bearing 240mm2-stage gearbox, infinitely variable programmableDrive power at 100/60% duty cycle: 78/87kWSpeed ranges: 2Speed range I: 10-501 rpmSpeed range II: 10-1750 rpmTorque I, 60% duty cycle: 8000 NmTorque II, 60% duty cycle: 2308 NmC-axisHolding torque with backlash-free spindle brake: 3000 NmSpe ...
used
Key data: 6 mm
Used Schütte SF32 Multispindle Automat Lathe with large number of spare parts and accessories! We sell 3 pieces of Schuette machines, with total 16 pallets of spare parts and accessories. More photos is added soon. Please ask more information if interested. Schuette SF32 - 6-Spindel - Drehspindelstillsetzeinrichtung - Schnecken Späneförderer - Gewindeschneideinrichtung mit Rücklauf
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 193 mm-Inside: Ø 80 mm-Hole circle: Ø 105 mm-Dimension: Ø 193 x 75 mm-Weight: 4.1 kg
Change gear, change gears, gear-Number of teeth: 152 pieces-Module: 1.25 mm-for splined shaft: Ø 25 mm
Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: VDF Heidenreich Harbeck, lead screw and feed screw lathe type 24R0 -Machine bed: hardened -Turning length: 1230 mm -Rotation diameter over bed: 500 -Turning diameter over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Drive: 5.5 kW -Accessories: 1x bezel, 7x Multifix tool holders, see photos -Dimensions: 1180/3050/H1345 mm -Weight: 1907 kg
Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg
Change gear, change gears, gear-Number of teeth: 141 pieces-Module: 1.25 mm-for splined shaft: Ø 25 mm
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø mm-Mounting: Hole shaft cone Ø 40-48 mm-Type designation: not available-Dimensions total Ø 180 x 85 mm-Weight: 6.8 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø mm-Mounting: Hole shaft cone Ø 38-48 mm-Type designation: not available-Dimensions total Ø 180 x 85 mm-Weight: 7,3 kg
Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg
Three-jaw chucks, three-jaw lathe chucks, power chucks-Chuck size: Ø 200 mm-Short taper: 6-Weight: 25 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 45-59 mm-Type name: 508x10-100x127 / 508x10-80x127-Dimensions total Ø 190 x 100 mm-Weight: 7.7 kg
