Manufacturer:
(Category: 102)
turning diameter over bed: 2000 mmturning diameter over slide rest: 1050 mmturning length: 7000 mmspeed: 1,6 - 250 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: max.: 4000 mmturning diameter over slide rest: . mmturning length: 7700 mmspeed: 0-750 u/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 2400 mmturning length: 6000 mmcontrol: Siemens 880T Turning diameter over slide: 1400 spindle diameter: 320 mmspeed: 0.4 - 1000 m/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2500 mmswing diameter: 2700 mmturning height: 1600 mmturning speed range - milling: 1,18 - 32,5 U/minturning speed range - milling: 4,25 - 117 U/minworkpiece weight: 10000 kgside head - cross travel: 800 mmram head - cross travel: 45 degrees - 1000 mmram head - cross travel: 30 degrees - 1000 mmtotal power requirement: 80 kWweight of the machine ca.: tdimensions of the machine ca.: m2-Axis D.R.O.5 positions turretThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: - mmturning diameter over slide rest: - mmturning length: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: - mmturning length: - mmcontrol: BOSCH CC 200 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mMovie:https://www.youtube.com/watch?v=lr-NrroeTtAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmtotal power requirement: 4 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,5+1+1,8 mMovie:https://www.youtube.com/watch?v=ckpr4-sE7K4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 220 mmturning length: 450 mmcontrol: Siemens 840 D main drive DC: 27 kWtotal power requirement: 27 + 8,5 + 5 + X kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 10 x 2 x 2 mMovie:https://www.youtube.com/watch?v=OffdO1J4G5YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal CNC lathe with tailstock manufactured in 2004. This Takisawa TS-35 features a maximum turning diameter of approximately 400 mm and a turning length of 1000 mm. It is equipped with a powerful 26.1 kW main spindle motor and a chuck size of 304 mm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-35 machine we have for sale. Contact us for further details.
- Very little hours- Hydraulic tailstock- CE Safety doors- Multi Fix Tool holders system D1- Chip conveyor
Traub TNL 20 – 9B Machine No. 11920182 Year of construction 2022 TX8i-s control (with Polyform / Helical / 19" multi-touch with gesture technology) Alternating operation: Use as a short or long-turning lathe Main spindle D20 (with 10,000 rpm) with C-axis Sub-spindle D20 with X/Z/C axis Tool carrier top X/Y/Z/H/B axis with 8 tool holders Tool carrier lower X/Y/Z/H axis with 8 tool holders Recirculating apparatus with 4 tool positions Cooling lubricant mist extraction and filter system Automatic CO2 extinguishing system Accuracy Package Tool breakage control device (Wkz beam above) Tool breakage control device (Wkz beam below) Hinge Belt Chip Conveyor Coolant system with 20 to 80 bar pump Charging magazine FMB Turbo 2-20 Sliding device for loading magazine Portal workpiece removal unit Workpiece conveyor belt
centre height: 200 mmcentre distance: 1.000 mmspindle turning speed range: 1600 U/minspindle bore: 42 mmturning length: 1600 mmturning diameter over bed: 410 mm: 230 mmmachine weight ab.: 1.700 kgdimensions: 2000 × 1000 × 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details.
turning diameter: 330 mmturning length: 669 mmcontrol: Sinumerik 828D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 828D12-fold revolver Sauter VDI40driven toolsC-axis3-jaw chuckTool Eyepart catcherchip conveyortail stockcoolant device with high pressure pumpbar loading device IemcaTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 600 mmmax. Drehdurchmesser / max. turning diameter 330 mmmax. Drehlänge / max. turning length 669 mmX-Weg / X-travel 260 mmZ-Weg / Z-travel 762 mmDrehzahl / spindle speed 3400 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesmax. Stangendurchmesser / max. bar diameter 75 mmEilgang X / rapid feed X 20 m/minEilgang Z / rapid feed Z 24 m/min.Gewicht der Maschine ca. / weight ca. 5700 kgT ...
turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmbar capacity: 56 mmturning speed range: 25 - 2000 U/minspindle nose: A2-6 total power requirement: 4,0 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: LBH ca. 2,5 x 1,2 x 1,8 m- RÖHM 3 Jaw Chuck Ø 250 mm- MULTIFIX Holder - Size B - Tailstock- Coolant pump with reservoir- Various turning tool holders- Various small partsWorkshop machineOtherwise, the gearbox runs quietly and the guides have no scratches, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 7100 mmswing diameter: 8000 mmturning height: 5030 mmdistance between table and cross rail: 5495 mmworkpiece weight: 200 tfaceplate turning speed range: 0,3 - 19 U/minmain drive motor: 125 kWcross travel: 4400 mmswivel range of slides - vertical: +30 / -15 °Control: FANUC 18i-TB total power requirement: ca. 155 kWweight of the machine ca.: 291 tdimensions of the machine ca.: 8,6 x 17,6 x 8,3 m2003 Retrofit and change to CNC- CNC Control Fanuc 18i-TB--2-Axis simultanous (X- & Z)- Z-Axe with hydraulic balance- Digital Scale in X and Z Axis- 2 rams on crossrailThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 410 mmy-travel: 570 mmz-travel: 140 mmcontrol: Mazatrol Matrix Maximum working diameter: 545 mmMaximum working length: 519 mmmain spindle speed: 35 - 6000 U/mintool taper: Capto C6 rapid traverse y/x/z axis: 30/26/33 m/minPerformance/capacity:Max. swivel range: 545 mmMax. machining diameter: 545 mmMax. outside diameter for bar work: 51 mmMax. machining length: 519 mmMax. workpiece weight:-Chuck work: 150 kg -Bar work: 200 kgMain spindle:Spindle speed: 35-6000 rpmSpindle bore diameter: 61 mmMax. torque: 161 NmTailstock:Rapid traverse: 8 m/minTravel range (advance/return): 434/281 mmMilling head:Milling head type: Single spindle with ATCTool shank type: Capto C6Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mmMilling s ...
turning diameter over bed: 410 mmturning diameter over slide rest: 220 mmturning length: 1000 mmcentre height: 205 mm: mmspindle bore: 46 mmspindle turning speed range: 40 - 2000 U/mintotal power requirement: 22,0 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,42 x 1,3 x 1,55 mmLathes with:- Copying attachment- Forkardt 3-jaw chuck F250- Multifix tool post- Coolant system- Machine light- Chuck guard- Chip tray- Chip guard wall- Foot brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8986 Type: DH-250/4 Producer: WMW Created: 1983 Parameters: Length: 3400 mm Width: 2100 mm Height: 1600 mm Weight: 4800 kg
Vertical lathe Hessapp DVH 250 BJ 2004 (already dismantled)
Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details.
This 4-axis DN SOLUTIONS LYNX 2100GA was manufactured in 2021. As new, showroom model. It features a maximum spindle speed of 6,000 RPM and a bar capacity of 45 mm. The machine is designed for high-performance compact turning, optimized for small precision parts. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100GA horizontal turning machine we have for sale. Contact us for further details.
Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details.
turning diameter: 240 mmturning length: 530 mmcontrol: Siemens 810 D Powerline swing diameter: 560 mmx-travel: 207,5 mmz-travel: 530 mmturning speeds: 6000 U/min: 12 Stk. total power requirement: --- kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
swing diameter: max. 450 mmchucking diameter: 400 mmcontrol: Siemens 840D (Index)Main spindle:: Max. rpm: 4.200 min/-1power capacity - main spindel: ( 35,5 / 56 ) kWmax. Torque: ( 340 / 550 ) NmC-Axis: 0,001 °turret:: number of toolpositions: 2x 12 posdriven statition: 2x 12 posworktool system: VDI 30 max. spindle speed driven tools: 6.000 U/min.power capacity - driven tools: 9,5 kWmax. Torque: 40%: 19 NmY - Axis: +/- 90 mmB-Axis: +270° / -90 °axis stroke:: x-axis: 730 mmz-axis: 340 mmy-axis: +/- 90 mmb-axis: +270° / -90 °feeds:: rapid traverse: X: 40 / Z: 30 m/minpallet changer:: numbers of pallets: 24 pos.size of pallet: 410 x 300 mmmax. workpiecediameter: 300 mmmax. workpiece weight: incl. Pallet: 25 kgChain width: 75 mmband speed: 7,5 m/mintotal power requirement: 56 kWweight of the machine ca.: 9,0 tdimensions of the machine ca.: 8,5 x 6,0 x 2,7 mDocuments: Chip conveyo ...
A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible.
The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg
Cycles lathe Microturn BNC 1840 Description: Sell our very well preserved cycles lathe Microturn BNC 1840 with turning length 1000mm and FAGOR 8055i control. Technical data: - Tip height 230mm - Max. turning length 1000mm - Speed max. 4500 1/min
turning diameter: 300 mmturning length: 1700 mmswing diameter over bed slide: 600 mmtotal power requirement: 12,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 10000 mmswing diameter: 14000 mmturning height: 8000 mmControl: Siemens Sinumerik 840 D workpiece weight max.: 500 tfaceplate turning speed range: 0,2 - 35 U/mindrive motor: 300 kWram head dimension: 600 x 600 mmmax. ram stroke: 4000 mmmilling drive: 100 kWhob turning speeds: 3000 U/minrapid traverse x + z axis: 10 m/mintotal power requirement: - kWweight of the machine ca.: 350 tMachine has never been used and is still original, seaworthy packed andstored.equipped with:- CNC control Siemens Sinumerik 840 D- Hydrostatic axes- Hydrostatic table- Milling device- Hirth couplings for tool holderAcessories:• VERTICAL HEAD ISO50 BIG PLUS AD 8T5060164• VERTICAL HEAD ISO50 BIG PLUS AD 6000RPM 8T5060165• HORIZZONTAL HEAD ISO50 BIG PLUS 8T5060163• UNIVERSAL HEAD TU-50- ISO50 AD BIG PLUS 8T5060171• HEAD DANDREA UT-8-800-S 8T5060166• TOOL HOLDER DEVICE 8T1203783• T ...
