used CNC Multiple Spindel Turning Lathes for sale

Ref. -No.: 10359Manufacturer: BRINKMANNYear of construction: 2005Type of control: CNCStorage location: HalberstadtCountry of origin: DeutschlandTool holder type: Sauter Werkzeugrevolver Operating hours: 45000 HoursFurther information:Hinged chip conveyorCoolant cleaning with 2 pumpsCooling system1x jaw chuck without cooling mist exhaust system

Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor

Gildemeister GMC20 ONE, Options / Accessories, - 5 Cross-slides pos. 1;2;3;4;5, - 2 Radial slides pos. 6 for cutting and rear-working operations, - 1 C-axis for the pick up spindle, - Pneumatic work-piece unloading chute for pos. 6, - Work-piece conveyor belt, - Swarf conveyor, worm type, - 5x Frontal tool spindle, fix, - Pick- up spindle in pos. 6, - High pressure coolant device 70l / 50bar, Country of origin: Italy, Control: Siemens 840D, Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 9,1, Z - travel [mm]: 70 / 140, Total power requirement [kVA]: 98, Weight of the machine ca. [kg]: 9.800, Auto bar loader: Cucchi Giovanni DBM.625

CNC multi spindle bar automatic, Gildemeister GMC 35 ISM, - 6 integretat spidles with C-axis, - 5 compound slides pos. 1; 2; 3, 4; 5;, - intipendend feed for central block, - douple slide in pos. 6, - pick-up spindle in pos. 6, - 5 frontal spindles, rotating, with internal coolant supply, ISO 40, - swarf conveyor, - Fire fihthing system CO2, - ARTIS tool breakage control system, Stangenlademagazin :, Cucchi Pietro PB 41 Compact, Country of origin: Italy, Control: Siemens 840D, Operating hours: 56.000, Number of spindles: 6, Max bar diameter [mm]: 35, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 21, Total power requirement [kVA]: 107, Auto bar loader: Cucchi Pietro PB 41 Compact

Used multi-spindle machine INDEX MS36E built in 1996 including a lot of accessories (collets, synchronizer guns, interchangeable wheels, various working curves, etc.) The plant is virtually ready for dispatch, in a dismantled state for inspection. For photos, technical data and a list of accessories, see Appendices. It has no major defects, is basically ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessory listing MS36E Iemca Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronizer Clamps (sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30,5 2x Ø 27,5 Ø 31 Ø 32 div. jaws Ø 33 for 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets of rod guide tubes Various reductions f ...

Okuma Twin-Star LT300 MY with 2 equivalent main spindles and tool turrets (2x12) Speed range: 38-3,800 rpm. Torque: 420 Nm with CNC control Okuma OSP-P200L with tool monitoring system for tool life and breakage with control expansion kit One-Touch-IGF-M-D Gravity Belt Filter SPB4 Coolant pump 20 bar, 40 l/min. 2 x Kitagawa B208 power clamping device Full clamping cylinder programmable right + left Y-axis with stroke for driven WZ stations Interface + servo drive integrated for loading portal Loading portal MIDI diam. 200 x 150 mm Pallet stacking magazine PSM 100/20 Workpiece shuttle, stacking table extension Connection nozzle for air filter (preparation) Turning diameter 350 mm (550 mm above bed) Speed range: 38-3,800 rpm. Torque: 420 Nm Year of construction 07/2011 Operating hours: 25,871 h / Spindle running time: 24,773 h At the end of last year, almost € 6 ...

Machine description - (Partial excerpt, further details on request):, - 6 motor spindles 5.5 kW max. speed 8,000 rpm., - Spindle capacity 16mm, Z 50mm stroke;, - 6 carriages X 40mm stroke, - 1 slide for counter operation, 75mm stroke., - Counter spindle with integrated motor 6 kW, - Max. speed 8,000 rpm, 150mm stroke,, - Rotating ejector with HP flushing, - Fanuc 30i numerical control, - Parts disposal and pneumatic, - Slide plastic coated, - Outer distribution belt greater capacity, - Active bar advance device, - Collets type F16 for active, - Bar preferential device, - Various Tension and reduction tubes, - Turning tool holder base (16x16), - Cross drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Front drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Electrical control cabinet, - Oil container 1,100 liters, - Coolant pump 100 l/min., 4 bar,  ...

Partial excerpt machine description (details on request): 6 motor spindles 5.5 kW max. speed 8,000 rpm. Spindle capacity 16mm, Z 50mm stroke; 6 slides x 40mm stroke 1 carriage for counter operation, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8,000 rpm, 150mm stroke, Rotating ejector with flushing HP Numerical control Fanuc 30i Parts disposal and pneumatic Slide plastic-coated Outer distribution belt larger capacity Active rod preference device Collets type F16 for active Bar preferential device Various clamping and reduction tubes Turning Tool Holder Base (16x16) Transverse drilling unit ratio 2:1 Max. 8,000 rpm - max. 4.4 Nm Front drilling unit ratio 2:1 Max. 8,000 rpm - max. 4.4 Nm Electrical control cabinet Oil tank 1,100 litres Coolant pump 100 l/min., 4 bar Paper filter system 50 μm Fine filter system 5 μm hydrostatic circuit Hy ...