Manufacturer:
(Category: 104)
Technical details Manufacturer: HASCO (Germany) Model: A190 Machine number: 3338 Year: 1986 Type: Tool grinding / pin grinding machine Configuration: Lathe-type toolroom unit with dual spindle arrangement Spindle speeds: 2160 / 4450 rpm and 5400 / 11120 rpm Drive motor: - Voltage: 380 V - Power: Approx. 0.44 / 0.65 kW - Speed: 1400 / 2800 rpm Feed system: Manual carriage feed Clamping: Integrated clamping fixtures for pins and small parts Construction: Compact machine with integrated cabinet base Application: Grinding, polishing, and reconditioning of ejector pins and precision tooling components Condition: Used, typical workshop wear; functionality untested Dimensions and weight (approx.) Length: 900 mm Width: 600 mm Height: 1200 mm Weight: 150 kg Auction-ID: A7-46498-200
- Total installed power approx. 1.10 KW. - Disc diameter from 100 mm to 650 mm. - Disc shaft diameter from 6 mm. - Disc thickness up to 6 mm. - Tooth pitch from 7 mm to 100 mm. - Angle of attack up to -10°. - Clearance angle from 0°. - Diameter of the abrasive disc from 100 mm to 125 mm. - Peripheral speed up to 23 m/s. - Coolant pump flow rate 48 l/min. - Coolant tank capacity 48 l. - Operating conditions of this machine: unchecked. - Dimensions for transport approx. 1300 x 900 x 2050 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-46513-32
The machine was completely overhauled by ELB in 2019 and has not been used since. Original value approx. 45,000 € Technical data see pictures Auction-ID: A1-46607-12
General description Double-sided vertical belt grinder (linisher) manufactured by Frommia, designed for industrial grinding, deburring, and surface finishing of metal components. Robust construction with heavy cast base ensures high stability during operation. Technical details Manufacturer: Ferdinand Fromm GmbH & Co. Model: 805 BD Year: 1991 Serial number: 34/7 Voltage: 380 V Current: approx. 6.1 A Frequency: 50 Hz Belt width: approx. 200 mm Configuration: Double-sided with two vertical sanding belts (left & right) Drive: Integrated central motor Tables: Manual working tables on both sides Dust extraction: Connection available Equipment - Dual sanding stations - Integrated motor drive - Adjustable working tables - Dust extraction port Condition and remarks Used industrial machine made in West Germany. Nameplate available and confirms specifications. Suitable for continuous wo ...
Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 150 mm Grinding wheel width 25 mm Mounting diameter 32 mm Connection voltage 230 V Motor power 0.5 KW Condition: never used / new (5) Auction-ID: A7-46460-583
Drill Bit Grinding Machine: Additional station for grinding back the drill cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Tungsten carbides with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running due to high weight and rubber feet. Sharpening angle adjustable for all common twist drills. Packaging Dimensions: 430 x 240 x 240mm. Weight 16Kg. Grinding range 8 - 32 mm Sharpening angle min./max. 90 - 140 degrees Connection voltage 230 V Condition: never used / new (5) Auction-ID: A7-46460-456
1 pc. universal whetstone (20mm wide) 1 pc. whetstone for HSS steel (40mm wide) Grinding wheel diameter 150 mm Grinding wheel width 20 + 40 mm Mounting diameter 12.7 mm Connection voltage 230 V Motor power 0.25 KW Weight 16 kg Dimensions L x W x H 0.37 x 0.2 x 0.24 m Condition: never used / new (5) Auction-ID: A7-46460-591
Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A7-46460-602
This grinder is ideal for regrinding tools such as face mills, drills, TIG welding needles and much more. comes standard with: Accessories for lathe tools Accessories for drills Accessories for milling 5C Spring Collet (4-6-8-10-12 mm) Clutch wrench 38-42 Grinding wheel wrench Allen key M3-M8 Screwdriver Diamond grinding wheel Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond Pen Spring Collet: 3/16\" - 5/16\" - 3/8\" - 1/2\" Grinding range 3 -28 mm Angle adjustable from - to horizontal 0-180 degrees Angle adjustable from - to vertical 0-45 degrees Angle adjustable from - to negative 0-52 degrees Clamping range 3 - 28mm mm Speed 5200 rpm Connected load 230 / 250 volts / watt Disc diameter 100 x 50 x 20 mm Machine weight approx. 45 kg Dimensions L x W x H 0.5 x 0.4 x 0.4 m Condition: never used / new (5) Auction-ID: A7-46460-407
Saw blade grinding machine with: - Diamond grinding wheel for carbide circular saw blades - Rubber feet for damped and quiet operation - Spacers for different saw blade holes Without saw blade Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 rpm Grinding range -20 to +20 degrees Machine weight approx. 12 kg Space requirements approx. 700 x 400 x 300 m Condition: never used / new (5) Auction-ID: A7-46460-422
Surface Grinding Machine - Magnetic plate - Coolant system - Documentation Grinding length 1250 mm Grinding width 400 mm Workpiece height 550 mm Table clamping area 1720 x 400 mm Grinding wheel dimensions 400 x 50 x 127 mm Table height above floor mm Magnetic plate 1250 x 600 mm Grinding spindle speed 3000 rpm Table load 1100 kp Total power requirement 13.8 kW Machine weight approx. 6.0 t Dimensions approx. 5.0 x 3.4 x 2.4 m Auction-ID: A7-46460-406
Grinding range 2 - 13 mm Sharpening angle min./max. 90 - 140 degrees Connected load 230 V Machine weight approx. 10 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A7-46460-489
Disc diameter 300mm Disc width 40mm Speed 1500rpm Power: 1.1KW see pictures Condition: unchecked (6) Auction-ID: A7-46460-604
Drill Bit Grinding Machine Grinding range 2 - 20 mm Acute angle min./max. 90 - 135 degrees Connected load 230 V Machine weight approx. 8.6 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A7-46460-502
functional and already dismantled/ready for loading Auction-ID: A1-45666-101
According to photos, weight estimated Auction-ID: A1-45666-17
According to photos, weight estimated Auction-ID: A1-45666-9
According to photos, weight estimated Auction-ID: A1-45666-7
According to photos, weight estimated, Year of manufacture 1977 - revised 1998 Auction-ID: A1-45666-6
\"• ManufacturerUzina de Strunguri Arad (Romania)• Type / ModelSNA 560 x 1500• NameSpecial machine based on SNA 560 x 1500 – Grinding/brushing machine with hydraulic tailstock• Description, accessories, conditionMachine base SNA 560 x 1500, converted or used as a grinding and brushing machine.Version with: • Hydraulically retractable tailstock (cylinder retracting/extending) • Spindle motor • Hydraulic unit • Separate control panel • Additional grinding/brushing unit with protective cover and extraction connection • 3-jaw chuck • Several clamping or workpiece holders (see pictures)Machine was used for surface processing (grinding/brushing).Type: SNA 560 x 1500Mains: 380 VFrequency: 50 HzVoltage: 380 VControl voltage: 110 VMotor power: 10 kWMain fuse: 25 ACenter width: 1500 mm• Dimensions in mm (LxWxH)approx. 3500 x 1400 x 1800 mm\" Auction-ID: A7-46417-359
Manufacturer: Geibel & Hotz GmbH (G+H)Type: FS 60 CompactName: Precision Surface and Profile Grinding MachineDescription:Hydraulic precision surface and profile grinding machine for industrial use. Suitable for surface and profile grinding of workpieces in tool and mould making as well as in production. Version with automatic longitudinal and transverse stroke, digital display and magnetic clamping plate. Machine comes from ongoing production. Scope of delivery:– Surface and profile grinding machine– Magnetic clamping plate– Operating instructions– Accessories as shown (grinding wheels, holders, etc. after inspection, not specified individually)– Max. grinding range: 600 × 350 mm– Standard magnetic plate dimensions: 600 × 350 mm– Max. longitudinal table movement: 660 mm– Max. transverse movement: 360 mm– Max. distance table to spindle centre: 525 mm– Max. table ...
\"Industrial bench grinder / brushing machine with 3-jaw chuck and accessoriesHeavy, free-standing industrial grinding or brushing machine in solid cast iron design.Equipped with: • 3-jaw chuck • Side protective cover • Mechanical feed option • Electric foot switch (emergency stop version) • Multiple grinding/brushing rollers (see pictures)Machine was used for grinding/brushing.Condition: Used, heavily soiled, uncleaned.Sold as shown with existing accessories (rollers).Type: Stand-alone machineDrive: Electric motor (belt drive)Clamping adapter: 3-jaw chuckOperation: Foot switchConstruction: Heavy machine body made of cast iron• Dimensions in mm (LxWxH)approx. 600 x 750 x 1100 mm\" Auction-ID: A7-46417-361
\"CNC tool grinding machineSAACKE UWIA-CNC – Sinumerik 810CNC universal tool grinding machine SAACKE type UWIA-CNC with Siemens Sinumerik 810 control including extensive accessory package, extraction system and cooling water treatment.The machine is suitable for grinding shape milling cutters, roller milling cutters, disc milling cutters, end mills, hobbing cutters, reamers, cutter heads, countersinks and taps up to Ø 200 mm.Age-appropriate optical condition. Functional. Viewing under power possible by appointment.>br Working area • Center height: 150 mm • Grinding length: 300 mm • Usable table area: 710 x 120 mm • Motorized table stroke: 300 mm • Table speed: 0.005 – 5 m/minaxes • Transverse stroke Z-axis: 200 mm • Height stroke Y-axis: 200 mm • Swivel vertically: 360° • Swivel horizontally: 210°Grinding spindle • Ø 60 mm • 4 speeds: 2100 / 3000 / 4200 / ...
\"Double-spindle deburring machine / grinding and brushing machineStationary deburring or grinding machine in heavy industrial design with two horizontally arranged spindles.A main spindle with clamped abrasive media, an additional spindle (according to the switch \"additional spindle\") can be switched on separately. Machine with protective tray/work tray, emergency stop, main switch and separate control cabinet. Extraction connection available (pipe connection on the side). Control panel with: • Main switch • Emergency stop • On/off button • Switch additional spindle • Brake switch • Operating hour meter (Kübler Codix)Solid welded steel construction, can be screwed together stably.Used condition with usual signs of wear. External dimensions approx.: 1200 x 1100 x 1300 mm (W x D x H)Double-spindle designElectrical connection via separate control cabinetExtraction connection ...
400 € 
