Manufacturer:
(Category: 104)
Machine number: 20932 Operating voltage: 3 x 400 VAC Frequency: 50/60 Hz. Rated Current: 46A 63A Control voltage: 200-240 VAC Power: 28 kW Control: Tool holder: Grinding head: Grinding spindle: Spindle can be swivelled by motor Drive power: 7.5 kW Speed: 0 – 9000 rpm Lens mount: Disc diameter: Max. number of slices: Travel: X: 380 mm Y: 280 mm Z: 280 mm Feed: X and Y axis: 20000 mm/min Z-axis: 10000 mm/min Swivel axes: Designation: C-axis Swivel angle: 340° Feed: max. 66°/s Axis: A-axis: Rotation endless Feed: max. 167°/s Incl. oil cooling and cooling system from the manufacturer ARO Incl. various matching machine accessories such as tool holders, coolant lines and other clamping devices
x-axis: 700 mmy-axis: 410 mmz-axis: 500 mmfeed range: 30000 mm/minA-Axis: 175 mmC-axis: 320 °workpiece dia.: 340-500 mmworkpiece length: 700-1000 mmworkpiece weight max.: kgmax. dia. of grinding wheel: mmspeed spindle max.: 8000 U/min.power capacity: 11,5 / 14,5 kWControl: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mmtotal power requirement: - kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3 x 2,6 x 3,55 m5 AXIS CNC TOOL AND CUTTER GRINDER- CNC Control Siemens 840Dsl- Milling Unit– Tooling- high-pressure coolant system- Tool ChangerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.
Cup wheel Ø: 180 mm Cup wheel speed: 2900 rpm electr. Connection: 380 V, 2900 rpm, 0.9 kW Vibration table dimensions: 200 x 350 mm Tilting Swinging Table Swing table swivels by +/- 20° Dimensions: 750 x 350 x 1270 mm
STANKO 5K822B Thread Grinding machine Grinding diameter 200 mm Grinding length 500 mm Max. grinding wheel diameter 400 mm Max. workpiece weight 30 kg Machine weight: approx. 4500 kg -for grinding of cylindrical and tapered, left and right, single-start and multi-start internal and outernal threads of various profiles.
Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Control type (CNC/manual): CNC, CNC brand: FAGOR, CNC model: 8040-T, Dimensions ...
Year: ca. 1970 magnetic plate size: 520 x 200 mmweight of the machine ca.: 1,4 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle turning speed range: 170 - 18000 U/minweight of the machine ca.: 7,5 tdimensions of the machine ca.: 5,00 x 4,00 x 2,20 m--> Control conversion (2014) to Siemens Sinumerik 840D Solutionline--> Technical data Grinding diameter: 20 - 300 mm--> Oscillation diameter: 350 (500) mm--> Workpiece length: 300 (1300) mm--> Recommended grinding depth up to: 300 mm--> Grinding table stroke Z-axis (total): 650 (950) mm--> Resolution: 0.001 mm--> Rapid traverse: 12 m/min-1--> Grinding stroke speed: 0 - 9.99 m/min-1--> Feed rate: 0 - 99.99 m/min-1--> Step feed value during reversal: 0 - 0.999 mm--> Grinding table stroke X-axis (total): 150 mm--> Resolution: 0.001 mm / Ø--> Rapid traverse: 5 m/min-1/R--> Grinding stroke speed: 0 - 5 m/min-1/R--> Feed rate: 0 - 99.99 m/min-1/R--> Step feed value during reversal: 0 - 0.999 mm / Ø--> Swivel capability of the workpiece headstock:--> B-axis: -32° ...
drill diameter: 3 - 50 mmdrilling length: 500 mmlip angle: 90 - 140 °voltage: 380 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 0,80 x 0,60 x 1,30 mSerial-No.: 76658The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 73066 Specifications: - Sanding belt dimensions approx. 2000 x 150 mm - Surface grinding opening approx. 560 x 150 mm - Sanding belt speed approx. 30 m/sec. - Contact washer B 150 / D 200 mm - Drive pulley B 150 / D 200 mm - Drive 400 V / 3 kW - Working height adjustable - separate mot. Dust extraction - Space requirement approx. W 750 x H 1050 x D 1500 mm - Space requirement para. approx. W 750 x H 1250 x D 750 mm - Weight approx. 180 kg
Grinding area: 600 x 400 mm Magnetic table Coolant tank various grinding wheels
grinding length: 500 mmgrinding width: 200 mmworkpiece height: 300 mmtotal power requirement: 1,5 / 2,2 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: ,6 1,5 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding wheel dimensions (od x id x width): 508 x 304.8 x 160 mm, Ø min/max to be rectified: 1.5 / 75 mm, Regulating wheel width: 160 mm, Regulating wheel dimensions (od x id x width): 304.8 x 190.5 x 160 mm, Grinding wheel width: 160 mm, Maximum length to be rectified in plongeé: 160 mm, Grinding wheel head motor power: 11 Kw, Long: 2.015 mm, Width: 1.280 mm, Tall: 1.440 mm, Weight: 3,000 Kg approx.
grinding diameter: 1524 mmgrinding length: 4400 mmswing diameter: 1524 mmmax. workpiece weight between centres: - kggrinding wheel dia. x width: - mmControl: FANUC 18i-TB chucking diameter: - mmspindle motor: 37,2 kWworkpiece drive: 29,8 kWspindle speeds (infinitely variable): 450 - 1250 U/minwork piece spindle speed: 7 - 42 U/mingrinding slide stroke: 4900 mmtotal power requirement: ca 90 kWweight of the machine ca.: - tdimensions of the machine ca.: 12,5 x 3,6 x 2,8 m- FANUC 18i-TB CNC control- Coolant system & belt filter with separator- Spindle oil cooling- Motor-driven counterholder- 2 steady rests- Splash guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls SIEMENS 840 C WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 457 mm grinding width max. - throughfeed grinding: 80 mm material thickness max. - throughfeed grindin: 20 mm grinding width max. - plunge cut grinding: 205 mm material thickness - plunge cut grinding: 80 mmGRINDING SPINDLE 1 drive power: 23 kWGRINDING SPINDLE 2 drive power: 23 kWCOMPONENT-FEEDER Feeder Design: rotary Feeder feeder velocity max.: 240 mm/min feeder velocity min.: 20 mm/minScope of delivery:- Machine- emulsion tank new in 2012Measuring control IONIC 17A
CONTROLS CNC controls SIEMENS SINUMERIK WORKING RANGE SURFACE GRINDING grinding length: 880 mm grinding width: 510 mmTABLE (SURFACE GRINDING) table surface (left-right): 800 mm table surface (front-back): 430 mm workpiece load (max): 800 kgMAGNETIC TABLE length: 800 mm width: 400 mmSPINDLESTOCK GRINDING SPINDLE spindle revolutions (min): 1500 /min spindle revolutions (max): 3500 /minGRINDING TOOL type of grinding tool: wheel diameter (min): 210 mm diameter (max): 400 mm borehole: diameter: 127 mm width: 100 mmELECTRICAL SPECIFICATIONS mains power supply: 30 kVADIMENSIONS / WEIGHTS space requirements -left/right-: 3150 mm space requirements -front/back-: 2350 mm total weight approx.: 6800 kg
grinding wheel diameter: 200 mmwheel width max: 32 mmgrinding wheel hole diameter: 51 mmgrinding wheel speeds: 2900 U/minengine output: 0,9 kWDouble wheel grinder mounted on standThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An old precision cylindrical grinding machine Carl Zeiss is available. Includes numerous accessories and tools. An on-site inspection is possible.
Honing machine, SUNNEN ML3500, (like ml5000 ml2000 ec3500 ml 5000 ml 2000), this machine is currently under complete electronic retrofit (Siemens), Touch screen. Loader interface possible
Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511,, Device for automatic chamfering of sawblades from Ø 145 mm,, Automatic threading of the grinding wheel,, Automatic fire extinguishing system,, Automatic central lubrication,, Coolant system 400 L with coolant tank with filter system,, Machine lamp,, Oil collecting tray,, 3 sawblade mandrels (loader)., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x ...
An industrial knife grinding machine MVM for sharpening woodworking parts is available. Knife length: 6000mm, control: Siemens PLC with remote control. Includes an extraction system, a magnetic table, and a chip filter. Documentation available. An on-site inspection is possible.
Name: CNC cylindrical grinder Machine type: Preise TT60-20L-C1 Machining size range - diam.: 600x2000mm Controller: Fanuc Series Oi Mate-MD
A CNC cut-off grinding machine Anthratec, previously used for cutting grids, is available. Cutting speed at 2000rpm: approx. 42m/s, speed range: 500–3500rpm, connected load: 30kW, control: Siemens S7-1200. Documentation available. An on-site inspection is possible.
Grinding length 600 mm Grinding width 320 mm Workpiece height max 500 mm Table movement longitudinally 750 mm Table movement transverse 340 m Grinding wheel diameter 350 mm Grinding wheel width 40 mm Spindle speeds 1500 rpm Rapid traverse vertical 400 mm/min Power 3,7 kw Automatic delivery Magnetic disk Coolant Setup Weight 2500 kg
grinding length: 1000 mmgrinding width: 600 mmworkpiece height: 500 (410) mmtable load: 700 kgtable surface area: 1000 x 600 mmgrinding spindle speed: 4000 U/mingrinding wheel motor: 10/15 kWgrinding wheel size: 400 x 100 x 127 mmControl: ELb Xpress-Cube total power requirement: 28 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4,1 x 2,7 x 2,65 mHigh-precision surface and profile grinding machine with Elb COntrol Xpress-Cube and grinding program.The operating concept enables fast machining of workpiecesusing manual grinding functions and automatic grinding cycles.Depending on the workpiece to be machined, you can choose between three grindingprocesses.1. FLAT GRINDING,2. PLUNGING GRINDING,3. ECO GRINDING (combined plunging and flat grinding)Magnetic plate,Y and Z axis drive via adjustable AC servo motor,Position measurement in the Y and Z axes via rotary encoder,additiona ...
A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible.
tube diameter: 16.0 - 90.0 mmwidth of the strips: 100 mmband length: 1250 mmgrinding band dimension: 100 x 1250 mmtotal power requirement: 2.2 kWweight of the machine ca.: 180 kg.range L-W-H: 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use () New price approx. 4.500 euros Special price on requestThe PN 17/90 is a grinding machine forgrinding pipe and profile ends on the front.Equipment:- electro-motor grinding machine for pipe and profile ends- 10x grinding rollers included in delivery incl. storage area - rear of the machine- simple manual clamping/opening of the material- lateral adjustment of the material clamping system- grinding up to 50° degrees possible- machine base- collecting tray for easy emptying of grinding dust- EMERGENCY OFF button at the front- front privacy screen made of plexiglass- side transport bags for easy transportThe data for this ad was creat ...
width of the strips: 150 mmband length: 2000 mmband speed: 30.0 m/sekgrinding width: 500 Plantisch mmsuction capacity: 630 m³/htotal power requirement: 3.75 kWweight of the machine ca.: 100 kgrange L-W-H: 1100 x 550 x 1035 mmFurnishing :- High quality construction- The drive roller is crowned- this automatically centers the sanding belt in the middle of the roll- Fully vulcanized contact roller for longest service life and smooth running- Tool-free and therefore faster, uncomplicated change of the sanding belt- Stepless height adjustment- for optimal adjustment of the belt sander to the user- Freely adjustable metal stop- for the optimal and safe guidance of workpieces Use of the large surface grinding area- Belt speed optimized in terms of design- thus burning the workpiece during processing can be largely excluded- Extraction equipped with robust and flexible extraction hoses- Motor ...
