Manufacturer:
(Category: 101)
Control unit, control panel, control panel, control unit, keyboard, screen, control-Siemens: Profinet connection box PN Plus-On the control panel: with additional panel holder/emergency stop button-Price: per piece-Number: 4 pieces-Dimensions: 420/350/H1220 mm-Weight: 30 kg
Drilling machine, pillar drilling machine, column drilling machine, tapping machine, thread cutting machine-Manufacturer: Möller, pillar drilling machine type MOE 1132-Engine: Loher 1.5 kW-Speed: 110 - 1450 rpm, continuously variable right-left rotation-Feed: 0.1/0.2/0.3 mm/rev.-Table size: Ø 370 mm, travel 735 mm-Spindle holder: MK3-Spindle stroke: 170 mm-Projection: 280 mm-Column Ø: 130 mm-Dimensions: 940/650/H1830mm-Weight: 398 kg with pallet
Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel-Manufacturer: Unseld, two-hand control panel from Dorstener APE80-3050 press brake-Type: SEP03.0.L1/stand STP 01.4.1-Accessories: including foot switch-Dimensions: Ø 500 x 1000 mm-Weight: 23 kg
bore capacity in steel (diameter): 40 mmthroat: 350 mmbore stroke: 180 mmspindle taper MT: 4 MKtable:: 560 x 560 mmcolumn diameter: 140 mmturning speeds: 50 - 1450 U/minfeeds: 0,1 - 0,2 mm/Utotal power requirement: 1,5 kWweight of the machine ca.: 580 kgrange L-W-H: 2,27 x 0,7 x 1,1 mm• machine base for clamping high workpieces• Digital Depth Gauge• Gearbox swivels 180 °• silent running through geärtete, ground oil-cooled gears• Tapping Function• electromagnetic clutch for drill feed• automatic feed• electric drive for table height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg
Magnetic drill, hand drill-Magnetic base: Magnetor type PS 32 L-Drilling machine: AEG type HBE-IV- Recording: MK2-Max. Drill: Ø 23 mm -Connection: 265V/200Hz-Dimensions: 700/300/H670 mm-Weight: 49 kg
handheld terminal, handheld control device, operating unit, control panel, operating panel, operating unit, operating device, programming device-Manufacturer: Siemens, Simatic S5 operator panel-Type: OP 393 III 6ES5393-OUA 15-Protection class: IP 50-Number: 2x control unit available-Price: per piece-Dimensions: 148/320/H55 mm-Weight: 0.7 kg/piece
Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multiple-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear, drilling head-Manufacturer: Grotefeld, multi-spindle head max 3 drills-Admission: M8-Spindle drive: dimensions see photo techn. drawing-Spindles: 2x clockwise / 1x counterclockwise rotating-Distance drill: see photo-Dimensions: 132/85 / H82 mm-Weight: 3.1 kg
Standard holders and accessories, SASSEX twist drill bits, Sassex spiral drill bits, boring bits, Sassex boring bits, Sassex holders, tool holders, holders for drill bits, twist drills-Manufacturer: Sassex, clip-on holder-Recording: MK4-Total length: 253 mm-Hole: Ø 22/14 mm / Pins: Ø 8 mm-Pin spacing: 40 mm-Dimensions: 253/51/H31 mm-Weight: 1 kg
Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg
x-travel: 1.850 mmy-travel: 1.400 mmz-travel: 720/905 mmControl: SIEMENS SL 840 D spindle turning speed range: 15.000 U/minB - axis: -20 / +120 °Tool bore: HSK-A63 0tool magacine with: 45 Plätzentool length - max.: 365 mmworkpiece diameter at used places besides: 90 mmtool diameter with 2 vacant positions: 130 mmNC rotary table: 1.600 mmT-slots: 12 groove width: 18H12 flute distance: 100 mmtable load capacity: 3.000 KGTable speed max.: 30 1/mintotal power requirement: 89 kWweight of the machine ca.: 26 tdimensions of the machine ca.: 7,00 x 6,20 x 4,15 m5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor.Machine can be inspected under powerThe data for this ad was cr ...
Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Two-hand control panel: from a press brake Atlantic HPT 13536 -Foot switch: Bernstein Classic -Dimensions: 920/1010/H1100 mm -Weight: 25 kg
x-travel: 1000 mmy-travel: 1000 mmz-travel: 950 mmControl: FANUC Pro-3 feed X/Y/Z/-axis: 1 - 50.000 mm/minrapid traverse X/Y/Z: 50,00 m/mintool taper: HSK-A 100 turning speeds: 20 - 12.000 U/minspindle drive: 25 / 30 kWtorque milling spindle: 420 Nmspindle diameter in front bearing: 110 mmB - axis: 360 x 0,001 °size of pallet: 2x 800 x 800 mmtable load capacity: 1.800 kgdimension of workpiece: 1.000 x 950 mmworkpiece height max.: 1.000 mmtool piece magazine with: 188 tool length - max.: 475 mmtool diameter: 320 mmweight of tools max.: 20,00 kgtotal power requirement: 65,00 kWweight of the machine ca.: 30,00 tdimensions of the machine ca.: 8,00 x 5,30 x H3,50 mHorizontal machining center with FANUC Porfessional 3 control, NC rotary table, el. handwheel, chip conveyor,coolant filter KNOLL VRF 450/2300, through-spindle coolant,188-station tool magazine. New spindle in 2023Machine can be in ...
Control unit, control panel, control panel, control unit, keyboard, screen, control-Comes from a CNC machining center-Manufacturer: Visual Data-Type: MC31 GHEB1 HOM-Dimensions: 482/365/H265 mm-Weight: 12 kg
Computer cabinet, control cabinet, terminal cabinet, terminal housing, control panel stand housing, control panel stand foot, stand column-Stand: stand housing for control desks / terminals-Execution: solid metal housing-Dimensions: see photos-Dimensions: 385/335/H730 mm-Weight: 32 kg
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert-Manufacturer: Roto Record, quick-change chuck mount: MK2 / 26 mm-Type: FW2 TGL 30 21212-Quantity: 2x quick-change chucks available-Price per piece-Total dimensions: Ø 50 x 143 mm-Weight: 0.6 kg
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert-Take shaft: SK60-2x sleeve: MK1-2x sleeve: MK2-2x sleeve: MK3-2x sleeve: MK4-2x sleeve: MK5-Weight: 48 kg
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit-Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103-Circuit board: LEA SRL. Type LEA 1016 2.028.01.061.02-Dimensions: 360/130/H60 mm-Weight: 0.4 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Adapter sleeve: Morse taper sleeve MK6 2 pieces-Type: PTPk-6/5 / MK6/5-Shipping/Price: complete-Transport dimensions: 127/64/H148 mm-Weight: 4.0 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Adapter sleeve: Morse taper sleeve MK5/3-Dimensions: Ø 44/80 mm-Weight: 0.6 kg
Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter, drill chuck holder, drill chuck holder, taper mandrel, MT insert shank-Manufacturer: Albrecht, drill chuck holder-Hoffmann: Art.-No .: 342600 3/24-Morse taper: MK3-Drill chuck: B24-Dimensions packaging: 165/30 / H30 mm-Weight: 0.5 kg
Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine-Max. Feed stroke: 150 mm-Drive: 1.1 kW 2750 rpm-Thread: M8-Number: 3x drill heads available-Price: per piece-Dimensions: 700/180/H180 mm-Weight: 26 kg/piece
Standard holders and accessories, SASSEX twist drill bits, Sassex spiral drill bits, boring bits, Sassex boring bits, Sassex holders, tool holders, holders for drill bits, twist drills-Manufacturer: Sassex, clip-on holder-Clip-on holder: Type H7 125.1-150-Recording: MK5-Tool: 90° / Ø 130 mm-Dimensions: Ø 130 x 375 mm-Weight: 9 kg
quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert, interchangeable inserts-Quick-change sleeves: 12 interchangeable inserts-Design/Size: Ø 12/14/18 mm, see photos-Art.No.: 22069-12.0 / 22075-14.0 / 22090-18.0-Price/Delivery: complete-Total transport dimensions: 300/245/H70 mm-Weight: 3.9 kg
A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain MillPlus IT, operating hours: 42603h, spindle hours: 20137h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible.
Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 117490h, spindle hours: 18086h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.
Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 113894h, spindle hours: 13349h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.
Verfahrweg X/Y/Z: 3200mm/1100mm/900mm, max. Werkstückgewicht: 5000kg, Tischdimensionen X/Y/Z: 3250mm/1220mm/1030mm. Spindelleistung: 45kW, Drehzahl: 6000U/min, Werkzeugaufnahme: SK50, Werkzeugdurchmesser: 125mm, Werkzeuglänge: 300mm, max. Werkzeuggewicht: 15kg, NC-Rundtischdimensionen X/Y: 800mm/800mm. Maschinendimensionen X/Y: ca. 7800mm/4700mm, Gewicht: ca. 25000kg, Steuerung: Siemens Sinumerik 810D Shopmill, Betriebsstunden: ca. 32000h, Spindelstunden: ca. 18000h. Inklusive Späneförderer und IKZ. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich.
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Manufacturer: Artykuly Techniczne, adapter sleeve: Morse taper sleeve MK6/5-Type: PTPk-6/5-Dimensions: Ø 64/130 mm-Weight: 1.5 kg
Travel X/Y/Z: 900mm/800mm/1020mm, rapid traverse: 50m/min, speed: 10000rpm, plate dimensions X/Y: 630mm/630mm, max. tool diameter: 300mm, max. swivel diameter: 1000mm, max. table load: 1200kg, tool positions: 300, tool holder: HSK 100, motor power: 35kW, machine weight: approx. 16000kg. Including chip conveyor, compressed air preparation panel, hydraulic-pneumatic system, cooler and various spare parts. Documentation available. On-site inspection is possible.
WMT GmbH & Co. KG
