Manufacturer:
(Category: 106)
Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press, quick-change punch holder -Stamp holder: Stamp holder -Hole: Ø 30 mm -Hole spacing: 94x63 mm / Ø13 mm, see photos -Dimensions: 120/90/H135 mm -Weight: 4.2 kg
Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: Intermediate block -Bore: Diameter 65 mm -Dimensions: see photos -Dimensions: 370/250/H125 mm -Weight: 46.7 kg
Pressure total: 2000 ton Stroke: 1500 mm Daylight: 2000 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 100 - 600 ton Die cushion stroke: 400 mm Die cushion pad area: 4000 x 1800 mm Cushion pressure in ram: 50 - 300 ton Approach speed: 200 mm / sec Working speed: 20 - 30 mm / sec Return speed: 200 mm / sec Oil volume: 5000 l Required power: 2 x 250 kW Weight of machine approx.: 360 ton
Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies -Hole: Ø27/33 x 257 mm -Dimensions: 360/105/H135 mm -Weight: 5.0 kg
Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies -Hole: Ø30 x 258 mm -Dimensions: 310/100/H125 mm -Weight: 4.6 kg
A complete 8-stage transfer press line with a Weingarten double-column transfer press is available. 1) Mechanical double-column transfer press Weingarten S.3100.08.70.1, year of manufacture: 1969, tool stations: 9, forming stages: 8, total press force: 3100t, press force blanking slide/drawing slide: 300t/2800t, strokes: 28/min, blanking slide stroke: 200mm, drawing slide stroke: 500mm, max. drawing depth: 120mm, drawing slide ejector stroke: 100mm, blank holder stroke: 50mm, drawing cushion force: 25t, transfer pitch: 700mm, max. blank dimensions X/Y: 450mm/450mm, max. blank diameter: 540mm, table dimensions X/Y: 1200mm/5600mm, main motor power: 300kW, machine dimensions X/Y/Z: approx. 10500mm/7500mm/9700mm, weight (according to documentation): approx. 524t, stroke counter reading (September 2024): approx. 25 million. 2) Blanking and cutting press Georg Maschinentechnik PKD 630, year of ...
A hydraulic two-column press brake Atlantik is available. Press force: 135t, bending length: 3000mm, throat depth: 250mm, ram stroke: 120mm, overrun time: 84ms, safety distance: 134mm, machine dimensions X/Y/Z: approx. 3500mm/1700mm/2300mm, weight: approx. 6800kg. An on-site inspection is possible.
Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible.
Stage Press / Eccentric Press Erfurt Pressen Erfurt 3, Maintenance No. 156, press force 320 t, year of construction approx. 1980, with 15 press punches, electronic transfer line, conversion by PBK, system consisting of double unwinding reel PBK, straightener PBK, feed, blank cut (Machine is partially dismantled after defect, without tools)
Key data: 315 t, 310 mm, 250 mm
Condition used Press capacity 315 t Stroke 250 mm Daylight 310 mm Table size (left to right) 320 mm Table size (front to back) 385 mm Table height 1250 mm Speed at max. press force 7.5 mm/sec Pressure speed at f max. 0.3 mm/sec Return speed 24 mm/sec Oil quantity 390 l Driving power 380 V/ 50 Hz/ 2.2 kW Dimensions 1950 x 800 x 2000 mm Height of machine above floor 2000 mm Total weight 2.4 t Mode of operation oil hydraulic Calibrating presses Description Contact the seller for more information Interested in this machine?
PRESS FORCES total force (nominal): 1000 toPRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1300 mmSLIDE stroke: 500 mm
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 toPRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mmSLIDE stroke: 600 mmSLIDE (HYDR. PRESS) return force: 38 toDIE CUSHION (TABLE CUSHION) stroke: 200 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 46131
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 toPRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mmSLIDE stroke: 600 mmSLIDE (HYDR. PRESS) return force: 38 toDIE CUSHION (TABLE CUSHION) stroke: 200 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 32510
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 toPRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mmSLIDE stroke: 600 mmSLIDE (HYDR. PRESS) return force: 38 toSLIDE EJECTOR / CUSHION stroke: 200 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 47037
CONTROLS PLC SIEMENS SIMATIC PANEL PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 400 toPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1300 mmSLIDE stroke: 700 mmDIE CUSHION (TABLE CUSHION) stroke: 200 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1100 mmMachine hours: 14060
CONTROLS conventional PRESS FORCES total force (nominal): 160 toPRESS TABLE table surface (left-right): 1000 mm table surface (front-back): 850 mmSLIDE stroke: 705 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1205 mmMachine hours: 78571
We offer used sintering presses in very good condition ready for immediate use. The best thing to do is to contact me if you are interested, then I can send you all the technical details as well as corresponding further pictures and videos and illustration To the entire facility New price was completely about 3 million euros
We offer used sintering presses in very good condition ready for immediate use. The best thing to do is to contact me if you are interested, then I can send you all the technical details as well as corresponding further pictures and videos and illustration To the entire facility New price was completely about 3 million euros
Key data: 160 t
Press force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Plunger: 750 x 450 mm Projection: 360 mm Speed from: 200 mm Speed on: 125 mm Height of the machine: approx. 3,450 mm Weight: approx. 7,000 kg Connection: 17 kW Machine can be sold in original condition or overhauled with current UVV
Key data: 250 t
Press force: 2500 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm (1200 x 630 mm) Plunger: 750 x 450 mm (900 x 550 mm) Projection: 360 mm Speed from: 200 mm Speed on: 110 mm Height of the machine: approx. 3,600 mm Weight: approx. 9,000 kg Connection: 20.5 kW Machine can be sold in original condition or overhauled with current UVV
Nominal pressing force 4,000 kN Plunger stroke, adjustable in steps 30160 mm Plunger adjustment 180 mm Projection 515 mm Idle stroke rate 45 / min Option: infinitely variable 10 ... 60 / min Tool installation height at maximum stroke bottom and top adjustment 660 mm Table clamping area (WxD) 1,700 x 1,000 mm Table height above floor 1,005 mm Plunger clamping surface (WxD) 1,100 x 800 mm Pin hole in plunger 65 mm Main motor power 45 kW Height of the machine approx. 4,325 mm Weight of the machine 33,000 kg Control system - press safety control with redundant design and self-diagnosis as well as a status and error display in plain text Stepless stroke rate control in the range of 1060 strokes/min via ABB frequency converter Control variant -touchscreen TFT color incl. electronic cam switchgear with tool control and too ...
The BSTA 50UL is a Bruderer high-speed precision stamping press rated at 500 kN (50 tons) nominal force, engineered for continuous progressive-die production at variable stroke rates from 100 to 1,120 strokes per minute. The press is equipped with a Bruderer BBV 202/120 strip feeder, delivering strip widths up to 203 mm and handling material thicknesses up to 2 mm. Adjustable stroke is set between 16 and 51 mm, with strip inlet height adjustable across a 50–140 mm range to accommodate varying tooling and material profiles. Nominal force: 500 kN (50 tons) Tool monitoring: Unidor Stroke rate: 100–1120 strokes per minute (variable) Strip feeder: Bruderer BBV 202/120 Adjustable stroke: 16–51 mm Mounting space / clamping plate: 760–940 mm Main drive: 22 kW Power supply: 400 V / 50 Hz Table area: 940 x 580 mm Strip inlet height (adjustable): 50–140 mm Max. strip width: 2 ...
The Bruderer BSTA 80H is an 80-ton high-speed stamping press built for heavy-duty progressive-die production, fitted with a BBV 320/200 strip feeder and Unidor tool monitoring. In stock in Pforzheim, ready for inspection. Nominal force: 800 kN (80 tons) Tool monitoring: Unidor Stroke rate: 100–1,000 spm Strip feeder: Bruderer BBV 320/200 Adjustable stroke: 16–63 mm Clamping plate area: 970 mm Main drive: 43 kW Power supply: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip inlet height (adjustable): 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: approx. 15,550 kg Operating hours (main drive): approx. 28,067 h More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request
Offer 26175 Technical data: - Max. pressure capacity up to 25 t - Max. plunger stroke 160 mm - Installation height without straightening unit 675 mm - Projection to the middle of the ram 250 mm - Table size approx. 1300 x 300 mm - Working speed AB approx. to max. 30 mm/s - Working speed to approx. 100 mm/s - Oil filling quantity approx. 150 ltr - Drive 400 V / 10 kW - Space requirement approx. W 4900 x H 2400 x D 1500 mm - Weight approx. 3000 kg - with: - Straightening table extension 2030 + 1520 mm - Transfer carriage with mounts on straightening table - Lace intake - Roll recording - Directional stamp - Swivel switch with dial gauge
Key data: 200 t
Press brake – 200 T – Open width 1,600 mm For sale is a hydraulic press brake from the manufacturer DURENDUS with a maximum press force of 200 t. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm and a stroke of 1,000 mm, making it suitable for bending, forming and straightening work in industrial use. Technical data + information: Press brake – 200 T – Open width 1,600 mm General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Type: 2-column frame press - Manufacturer: DURENDUS - Press force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Usable area ram: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg Hydraulic cylinders - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylin ...
The dimensions of the machine are LxWxH 2500mm x 1600mm x 2500mm. The weight is 8250kg. The machine is in a little-used condition.
