subcategories
(3rd category level)
Manufacturer:
(Category: 109)
CNC machining center Type: Integrex J-200 S Manufacturer: Mazak Year: 2015 Control: Mazatrol SmoothG 5-axis turning + milling in one clamping X: 450 mm Y: 200 mm Z: 960 mm B axis C axis Main spindle speed: 5000 rpm Subspindle: allows complete machining from both sides without re-clamping Max working diameter: 500 mm Max working length: 910 mm Tool tray: 36 positions Capto C6 / PSC63 Internal cooling A large number of accessories (jaws, clamps, holders, etc.) Part of the sale is a functional post-processor for SolidCAM Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -
The CombiCut oxyfuel drilling system from Microstep offers a cost-effective alternative to high-performance laser cutting systems, especially for thicker sheets. Manufacturer: Microstep Model: CombiCut Year of Manufacture: 2022 Technical specifications: - Cutting area: 6000 x 2000mm - Drilling unit: 26.8 kW – up to M24, drilling up to 40 mm - Includes calibration unit for drilling tools - Includes tool changer (6-position – at the end of the table) - Filter system , suitable for indoor installation - Cutting thickness up to 150mm - Includes BG-compliant safety technology (light barrier) - Includes guided tours (S49) - The portal is driven on both sides for high precision. - Operating hours: 95 hours drilling, 587 hours oxy-fuel - Total hours: System switched on 5600 hours - No technology expansion possible - No CAM software required – the system is compatible with ...
Manufacturer: DMG MORI Model: CTV 250 DF Year of Manufacture: 2019 Type of Machine : Power skiving machine / CNC Turning Center Max spindle speed: 6,000 rpm Secondary spindle speed: 7,000 rpm Machine weight: 7,000 kg Power supply: 400 V, 50 Hz, L1-L2-L3-N-PE phase Power consumption: 65 kVA Max current: 95 A Fuse: 100 A / 1.00 kA Max voltage: 440 V Control voltage: 230 V / 24 V Spare parts are available for sale separately Find more here - / Contact us at -
GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Lo ...
CONTROLS CNC controls WORKING RANGE -WIRE CUTTING- X-axis travel: 500 mm Y-axis travel: 350 mm z-axis travel (vertical): 426 mm conical operation for max.: 30 ° U-axis travel: 140 mm V-axis travel: 140 mmWIRE SYSTEM wire diameter (min): 0.15 mm wire diameter (max): 0.33 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1940 mm space requirements -front/back-: 2300 mm total height: 2600 mm total weight approx.: 4200 kg
workpiece diameter: 5 - 1.000 mmmodule range: 0,2 - 25 helix angle: < 90 °Control: Wenzel GearTec faceplate diameter: 750 mmx-axis: 1.200 mmy-axis: 550 mmz-axis: 1.000 mmtotal power requirement: 6,5 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 3,30 x 3,15 x 2,70 mSoftware:BMain, FPDFPPostAction, GrafTool, TAlign,TAnalyse, TApplication, TCali, TCut_INPUT,TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL,THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot,TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL,TStat, TStylus, WMI, wingeco.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 630-640 mmturning diameter over slide rest: ca 380 mmturning length: ca 2000-4000 mmtotal power requirement: 15 kWweight of the machine ca.: 7-8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TRUMPF TruPrint 3000 3D Printers GENERAL Project No.: 905844 Quantity: 1 pcs. Manufacturer: TRUMPF Type: TruPrint 3000 Year of Make: 2016 Condition: Used machine Approx (hrs): 3571 DESCRIPTION LASER Laser power Preheating substrate plate 200 degrees Diameter buildable area 300 mm Overall height 400 mm 2 pcs. removable construction and storage cylinders Adjustable layer thickness 20-150/1000 mm GENERAL TECHNICAL DATA Mains fuse 32 A Machine dimensions (LxWxH) approx. 3385 x 1750 x 2070 mm Machine weight approx. 4300 kg NOTE Suitable for stainless steels, tool steels, aluminum, nickel-based or titanium alloys We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non- ...
GENERAL Project No.: 905713 Quantity: 1 pcs. Manufacturer: GEORG RENDER Type: W 90 TH4 WSKAT PLC Control: Siemens SIMATIC HMI Year of Make: 2017 Condition: Used machine PARTS CLEANING Cleaning medium: Water-based Front loader Max. weight per load 120 kg GENERAL TECHNICAL DATA Total power requirement 26 kVA Machine weight approx. 750 kg NOTE We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non-binding and to check the data in detail during an inspection.
SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE length: 670 mm width: 480 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 4500 mm space requirements -front/back-: 3053 mm total height: 2500 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzPOWERJET T4-V TWIN continuous cleaning system – powerful and reliableA high-quality POWERJET T4-V TWIN industrial continuous cleaning system from renowned manufacturer LPW Reinigungssysteme GmbH is available for sale.The system is ideal for the efficient cleaning, rinsing, drying and preservation of workpieces in series and batch production.Two working chambers for high throughput and flexible processesMulti-stage cleaning, rinsing and drying process including vacuum and hot air dryingSuitable for batch weights up to 200 kgFive freely programmable cleaning programmesMovement options: stationary, rotati ...
Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard ...
groove width: 3-100 mmdrawing length: 750 mmworking speed: 0-20 m/minboring diameter: 10-500 mmcutting speed: 0-20 m/minreturn speed: 0-50 m/mincarrying capacity: 35.000 kgPower connection: 12,27 kWcutting capacity: 40.000 Nmachine table: 500 x 770 mmtotal power requirement: kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: mEquipment / accessories:Original year of manufacturereconditioned in 2019 and equipped with new controler- dividing head- many accessories (grooving knives, tools, various) - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
z-travel: 200 mmClamping diameter of the cutter heads: max. 550 mmMax. permissible cutter head weight: 150 kgMounting plate diameter for cutter heads: 360 mmMounting cone for cutter heads Nominal diameter: 500 mmweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2 x 1,5 x 2,03 mCutter Head Set-Up- and -Measuring MachineIn the manufacturing process for spiral-toothed bevel gears, the quality ofthe gear cutting gear cutting tools used plays a decisive role.Particularly in dry milling, high gear cutting quality and a long servicelife can only be achieved with precisely adjusted cutterheads.The Oerlikon cutterhead setting and testing device CS 200 enables quick andeasy setting of the individual knives and simple adjustment of the individualknives, it checks the position and documents the measurement results. Themeasuring sequence on the CNC-controlled testing device is partially ...
: 9 St.: kg: ca. 750 x710x1020 mmweight: 180 kgdrawer measurements: mmColour: 6011 RALLarge drawer usable space ...x... mmFull extension drawer runners (VA) 100%2 drawers with internal height 30 mm2 drawers with internal height 55 mm,2 drawers with internal height 80 mm,2 drawers with internal height 130 mmBall bearing drawer runnersIndividual pull-out stopIndividual locking possible for each drawerTÜV GS testedDrawers flush with cabinet, recessed handlesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg
End mill, end mill, cutter, face mill, milling head -Cut-on end mills: Angle end mills, cylindrical end mills -Type: Ø64 x 10 mm -Hole: Ø 22 mm -Quantity: 1x milling cutter available -Dimensions: Ø64 x 20 mm -Weight: 0.2 kg
End mill, roller cutter, milling cutter, disc cutter, slot cutter -Manufacturer: Schuler, end mill cutters, disc cutters -Type: 125Wx12x32 HSS K10 -Hole: Ø 32 mm -Quantity: 1x milling cutter available -Dimensions: Ø 125 x 12 mm -Weight: 0.5 kg
End mill, roller cutter, milling cutter, disc cutter, slot cutter -Disc cutters: 2 pieces Ø100/125 mm, cross-toothed -Type: 125Øx6x40Ø K10 / 100Øx14x40Ø/ K10 -Hole: Ø 40 mm -Price/Fee: complete -Transport dimensions: Ø 125 x 20 mm -Weight: 0.8 kg
End mill, roller cutter, milling cutter, disc cutter, slot cutter -Disc cutter: Ø80 x 20 mm, cross-toothed -Type: WF2-08-40/13 80Ø K10 -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 80 x 20 mm -Weight: 0.5 kg
