subcategories
(3rd category level)
Manufacturer:
(Category: 109)
A complete Schleuniger cable processing system for processing large cables and wires is available. 1) Cutting and stripping machine Schleuniger MegaStrip 9600, year of manufacture: 2008, cable cross-section range: 0.5mm²-100mm², max. conductor cross-section: 240mm², max. cable diameter: 25.4mm, max. stripping length front/right: 300mm, max. stripping length rear/left: 150mm, max. feed: 2m/s, belt width: 30mm, blade pairs: 4, machine dimensions X/Y/Z: approx. 900mm/800mm/1300mm, weight: approx. 320kg. 2) Rotary cutting unit Schleuniger RU 9600, year of manufacture: 2007, max. opening: 27mm, number of blades: 2, blade system: rotating diametrical blades, max. cutting depth: 6mm, clamping jaws: 4. 3) Cable payoff and feeding unit Schleuniger PF 4600/406.00, year of manufacture: 2010, max. roll weight: 600kg, max. roll diameter: 1050mm, max. roll width: 750mm, roll bore range: 38mm-125mm, ...
A fully automatic cable processing machine Schleuniger with two stations and one compact station Strunk is available. Cable length range: 55mm-65000mm, conductor cross-section range: 0.13mm²-6mm², max. stripping length: 18mm, max. feed speed: 12m/s. Machine dimensions X/Y/Z: approx. 3750mm/1450mm/1850mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible.
A fully automatic Schleuniger cable processing machine with two stations is available. Stations: 2, system: Cut-Strip-Terminate, conductor cross-section range: 0.15mm²-6mm², AWG range: 26-10, min. cable length: 60mm, max. cable length: 65000mm, max. feed rate: 12m/s, stripping length: 0mm-45mm, swivel movement range: 0°-90°, crimping force: 20kN. Machine dimensions X/Y/Z: approx. 3650mm/1850mm/1300mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.
Includes: - Océ TDS600 Folder - dimensions: 1400/2300x1100x1020mm Print speed: approx. 9 A1 prints per minute .nbsp; - Print resolution: 600 × 1200 dpi .  - Technology: Electrophotography (LED) with Océ Radiant Fusing.nbsp; - Paper width: up to approx. 914 mm As well as operation provided with: - mobile cabinet - desktop - monitor - keyboard and mousePower: 230 V
turning diameter over bed: Ø16 mm mmweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2045 x 900 x 1685 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 25400 €: 485.14 €: 1250x2500 mm: HYPERTHERM Powermax 45 XP : 6 mm: 12 mm: 25 mm: 4 mm: 45 A: 45 A 50 % ED, 32 A 100 % A: 24 m/min: 1/10 mm: 470 l: 500 kg/m²: 3060 mm: 1760 mm: 1500 mm: 500 kgcompressed air powered plasma sourceHYPERTHERM Powermax 45 XPCNC-workbench software (external PC not included)height adjustment by arc voltageset-up laserprecision profile rail guide(HiWin)zero backlash HTD drive beltdriven by step motorssolid frame constructionseperate renewable support gratewater trough to catch flying sparksswimming burner bearing in combination with exchangeable slide screws, enables constant cutting heighthand operation unit for comfortable processing and set up on the workpieceusers manual in GERMANaccording to CE rulesALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp ...
A cutting machine for small and large formats is offered. estimated value of goods 1000 €Shipping within Germany possible - direct processing with the seller.Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-102
: neu : 2025 : 020177 : prompt, Zwischenverkauf v : Türkei : 880 €: 1 : 50 kg: 0,05 to: 30 mm: 700 mm: 100 mm: 80 mmWithout drive, idling rollersManual adjustment of the centre distanceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC vertical machining center Type: DMC 1035 V ECOLINE Manufacturer: DMG MORI Year: 2012 Control: Siemens Sinumerick 840D Total hours: 12,058 Spindle hours: 5,039 X: 1035 mm Y: 560 mm Z: 510 mm Working table: 1200 x 560 mm Tool magazine: 20 positions Max spindle speed: 8,000 rpm Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -
CNC vertical machining center Type: DMC 1035 eco Manufacturer: DMG Year: 2010 Control: Siemens Sinumerik 810D Total hours: 25,503 Spindle hours:13,362 X: 1035 mm Y: 560 mm Z: 510 mm Max spindle speed: 8,000 rpm Tool magazine: 20 positions Rapid traverse X/Y/Z: 30 m/min Rated power: 17 kVA Torque:83 Nm Table:560 x 1200 mm Table load: 1000 kg Chip conveyor Dimensions: 3137 x 3355 x 2758 mm Machine weight: 4250 kg In good condition, fully functional, under power Find more here - / Contact us at -
CNC portal machining center Type: DV 1432 Manufacturer: Pinnacle Year: 2015 Control: Fanuc α 30/3000i 7.0 X: 3200 mm Y: 1400 mm Z: 900 mm X-axis rapid traverse: 16 m/min Y-axis rapid traverse: 20 m/min Z-axis rapid traverse: 20 m/min X/Y/Z feed: 10 m/min Rated power: 50 kVA Workpiece length (max.): 4000 mm Workpiece width (max.): 1350 mm Workpiece weight (max.): 8000 kg Max spindle speed: 8,000 rpm Spindle motor power: 18,5 kW Tool length: 350 mm Tool diameter: 127 mm Tool weight: 20 g Table: 1200 x 3200 mm Table load: 8000 kg Dimensions: 8130 x 4150 x 4500 mm Machine weight: 17000 kg Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -
Wire EDM machine Type: Robocut C 600 i Manufacturer: Fanuc Year: 2018 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Workpiece width (max.): 820 mm Workpiece length (max.): 1050 mm Max workpiece weight: 1000 kg Equipment: refrigerator, compressor Machine in good condition, fully functional, under power Find more here - / Contact us at -
Hydraulic press Type: H 1000 Manufacturer: Hidroliksan Year: 2018 Pressing force: 1000 t Stroke: 800 mm Shut high: 1300 mm Slide clamping surface:2300x3000 mm Table clamping surface:2300x3000mm Max table load: 10000 kg Side opening: 900 x 1000 mm Operating speed: max 9,8 mm/s Cylinder diameter: 500 mm Approach speed: 110 mm/s Return speed: 150 mm/s Main motor: 45 kW Frequency: 50 Hz Max power consumption: 110 A Dimensions: 4500 x 3500 x 6000 mm Total weight: 78,000 kg Machine in very good condition, fully functional, under power Find more here - / Contact us at -
CNC vertical machining center Type: DNM 400 Manufacturer: Doosan Year: 2010 Control: Fanuc i Series X: 635 mm Y: 435 mm Z: 510 mm Table size: 790 × 435 mm Max. table load: 400 kg Tool magazine: 20 positions Max. spindle speed: 8000 rpm Spindle power: 15 kW Spindle taper: ISO 40 Machine weight: 5000 kg Dimensions: 1962 × 2093 × 2509 mm Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -
Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table, rotary coupling -Manufacturer: NIKKEN Rotary table with drive -Type: CNC-100 -Recording: SK40 -Clamping: pneumatic -Control: Z3BF UNIT -Tailstock: 2 pieces type P-105 -Dimensions of transport trolley: 600/940/H720 mm -Weight: 119 kg
Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg
Excellent condition - Fully operational - Loading / Transport possible! control: R-30iA running time: 13931.3 hours Axes: 6 load capacity: 125 kg Payload: Wrist: 125 kg J3 arm: 25 kg J2 Base: 550 kg REACH: 3005 mm Motion Range: J1: 360° J2: 136° J3: 352.6° J4: 720° J5: 250° J6: 720° Motion Speed: J1:110°/sec. J2: 110°/sec. J3: 110°/sec. J4: 170°/sec. J5: 170°/sec. J6: 260°/sec. Wrist Moment: J4: 588 Nm J5: 588 Nm J6: 343 Nm Further technical details: mechanical weight: 1190 kg (without controller) mounting method: floor Delivery Included: jointed-arm robot suitable control cabinet teach pendant cable set
Excellent condition - Fully operational - Loading / Transport possible! Travels X-400 mm Travels Y-300 mm Travels Z-250 mm Workpiece dimensions 700x650x250 mm Travels U/V 120x120 mm Taper angle +/-30º - 87 mm Wire diameter 0.10-0.33 mm
Excellent condition - Fully operational - Loading / Transport possible! Flow rate 3500 l/min. suction capacity 22 kW operating pressure 8 bar modelname / number ASD 37
EDM machine Mitsubishi FA20 The rear door seal needs to be replaced A complete service must be done after relocating the machine, adjusting axes According to the Mitsubishi Service Center, costs approx. 2,500 €
Plastic 3D printer manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a laser type of Ytterbium Fiber and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details.
This 3-axis AGIE Hyperspark 2 Exact with Erowa was manufactured in 2005. It features an X-axis travel of 350 mm, Y-axis travel of 250 mm, and Z-axis travel of 250 mm. The machine is equipped with AGIE VISION 4 Software and includes an EROWA ROBOT MULTI with 60 ITS 148 places and 240 ITS 50 magazine places. If you are looking to get high-quality die-sinking EDM capabilities, consider the AGIE Hyperspark 2 Exact machine we have for sale. Contact us for further details.
CNC vertical machining center Type: Alpha-Center HP 2060 Manufacturer: KAAST Year: 2015 Control: Heidenhain TNC 620 X: 2060 mm Y: 850 mm Z: 815 mm Table dimensions: 2150 × 800 mm Max. table load: 3240 kg T-slots: 18 mm, 7 pcs, pitch 125 mm Spindle speed: 12,000 rpm Spindle taper: SK 40 Main motor power: 26 kW (35 HP) Rapid traverse (X/Y/Z): 33/33/25 m/min Working feed: up to 12,000 mm/min Max. tool length: 250 mm Dimensions: 5450 × 3540 mm Weight: 15200 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -
10 € 
