subcategories
(3rd category level)
Manufacturer:
(Category: 109)
100 pieces of inserts NEW consisting of: 30 pieces CCMT09T304 for steel 30 pieces CCMT09T304 for stainless steel 20 pieces CCMT09T304 for aluminum 20 pieces CCMT09T304 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
100 pieces of inserts NEW consisting of: 40 pieces SPKN1203 for steel 40 pieces SPKN1203 for stainless steel 20 pieces SPKN1203 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
100 pieces of inserts NEW consisting of: 40 pieces TPKN2204 for steel 40 pieces TPKN2204 for stainless steel 20 pieces TPKN2204 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
100 pieces of inserts NEW consisting of: 40 pieces TPKN1603 for steel 40 pieces TPKN1603 for stainless steel 20 pieces TPKN1603 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
100 pieces of inserts NEW consisting of: 30 pieces R390-11T3 for steel 30 pieces R390-11T3 for stainless steel 20 pieces R390-11T3 for aluminum 20 pieces R390-11T3 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
100 pieces of inserts NEW consisting of: 30 pieces CNMG120408 for steel 30 pieces CNMG120408 for stainless steel 20 pieces CNMG120408 for aluminum 20 pieces CNMG120408 CERMET The composition of the set can be changed on request.
100 pieces of inserts NEW consisting of: 30 pieces APKT1604 for steel 30 pieces APKT1604 for stainless steel 20 pieces APKT1604 for aluminum 20 pieces APKT1604 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
diameter: 250 mmtotal power requirement: kWweight of the machine ca.: 0,05 tdimensions of the machine ca.: m1 pc. three jaws chuck - diameter 250 mmbore 80 mmfastening: 4 pcs screws 135The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m1 pc. three-jaws chuck - diameter 250 mmbore 75 mmwith flange plate for mounting on milling table 0320The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m1 pc. four jaw chuck - diameter 250 mmbore 75 mmKK 140fastening: 4 pcs. screws M 16 / 170The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 315 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 0,1 mbore 75 mmKK 1404 pcs. fastening screws 173 / M 6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Radial Drilling GSP 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T
MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..
Robot Laser Welding and Cutting Cell / Laser cutting and welding cell Year of manufacture 2018 Wenige Arbeitsstunden / not many working hours Robot Fanuc M-710iC/70 Control CNC: Fanuc R-30iB) + MFP Payload / lifting max: 70 kg Repeatability: ± 0.04 mm Working range: 2050 mm IP54 Fiberlaser source: IPG Photonics Model YLS-4000-S2T-Y16 Power: 4kW Cooling system. Two outputs optical and permanent connections of welding and welding Laser Cutting Heads / Two outputs optical and permanent connections of welding and laser cutting heads. Source dimensions: 856 x 806 x 1206 mm; Weight / weight: 330 kg; Power supply: 400–460 V/3P + PE at 50–60 Hz; Operating current at: 4000 W and 400 VAC: 20 A Laserschneidekopf / laser cutting head: HIGHYAG BIMO-FSC Laserschweißkopf / laser welding head: IPG Photonics. FLWO-D30 Vertical Welding: Fronius 7000 Doppe ...
Iba-E35 used column drilling machine. Drilling capacity: 35mm. Table: 525x525mm. 9 speeds. (70-1406rpm). CE certificate for european used machines.
Erlo TCA-60 used column drilling machine. Drilling capacity: 60mm. Cross table of 700mm. CE certificate for used machines
Erlo S-18 used desktop drill. With base. Drilling capacity: 18mm. Tapping capacity: M14. Table: 270x270mm. Cone: CM3. Speeds: 245-4000rpm. Motor: 1,4cv. CE. Year: 2005. Weight: 250Kgs.
Inv. Num. : 7711 Type: VM Multi 400-1 Producer: Schmalz Created: 2021 Parameters: Load capacity: 275 kg Weight: 75 kg
KASTENOFEN ZUM EINBRENNEN VON PTFE TEFLON BESCHICHTUNGEN Konvektionsofen zum Aushärten von PTFE-beschichteten Werkstücken Maximale Temperatur - 500ºC Heizquelle - Elektrizität Erzwungene Zirkulation Innenraum aus rostfreiem Stahlblech AISI304 200mm Dicke der Isolierung
POLYMERISATIONSOFEN Höchsttemperatur: 220ºC NÜTZLICHE INNENABMESSUNGEN Länge : 2.500 mm Breite : 1.150 mm Höhe: 500 mm Material der Außenfläche: 1mm Karbon-Blech Material der Innenfläche: 1 mm verzinktes Stahlblech Dicke der Isolierung: 150 mm Isolierung: Steinwolle (50 kg/m³) Wärmeübertragung : Konvektion durch geschlossenen Luftkreislauf Art der Beheizung : Direkte Beheizung mit elektrischen Heizkörpern Temperaturregelung : Ein/Aus, 0-400ºC Digitaler Thermostat, Fe-Const (J-Typ) Thermoelement Umgebungstemperatur : +10ºC (während des Betriebs) Gleichmäßigkeit des Ofens: ± 2,5ºC (5ºC insgesamt) Regelgenauigkeit: ±1ºC Aufheizzeit : 25-30 Minuten, leerer Ofenzustand Ofentür : Isoliert mit Steinwolle, automatische pneumatische Guillotine-Tür Manuelle Steuerung des Öffnens/Schließens über Joystick Beschickung/Entnahme : Manuelles Einschie ...
Incl. control and control panel Axles: 6 Hand load capacity 16 kg
Inv. Num. : 7688 Type: 203 F2 Producer: HITACHI Generated: 2000 Parameters: Control System: MARK-10W Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 170 mm Feed length in U-axis (-): 20 mm Feed length in the V-axis ( -): 20 mm Maximum wire thickness: 0.25 mm Dielectric container capacity: 160 l Max. workpiece dimensions: 450 x 350 x 170 mm Max. workpiece weight: 200 kg Machine height: 1880 mm Machine length: 1525 mm Machine width: 1810 mm Machine weight: 1500 kg
KUKA KR30-3 industrial robot was built in 2015. This compact machine with a robust design is the perfect solution for many applications such as handling, milling or welding workpieces where short cycle times and high accuracy are required. The increased arm’s range of movement allows free operation in all positions, even in hard-to-reach places. In addition, in order to achieve excellent dynamic movements combined with high process reliability, each of the 6 axes is driven by a powerful servo motor. The KUKA industrial robot designed in this way optimises even the most intensive production processes, while maintaining the highest productivity. The KUKA KR 30-3 robot arm was used sporadically and worked a small number of hours. Its task was the operation of injection moulds (picking up, handling and depositing previously prepared cores). The KR 30-3 6-axis robot weighs 665 kg. Tec ...
revolutions per minute: 8000 U/minx-travel: 1000 mmy-travel: 500 mmz-travel: 570 mmControl: Siemens weight of the machine ca.: 5000 KGThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: max 300 mmturning length: max. 2000 mmcontrol: Siemens Serie 810D turning spindle: Durchlass 90 mm : 300 mm Feed speed: 6/6 m/min.number of tools: 8 quill stroke: 300 mmdiameter of quill: 105 mmtaper MK: 6 coolant tank: 100 ltotal power requirement: 15 kWweight of the machine ca.: 4650 KGdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: Ø30/300mm mmturning length: 3055mm +/-0.3mm mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
KOLZER DGK36″ PVD sputtering machine was built in 2017. This specially constructed machine is used in the vacuum coating process, after which the workpieces are characterised by a metallic effect” with high resistance to abrasion and chemical agents, as well as innovative colours. The PVD sputtering process involves the expulsion of metal atoms from a target (evaporation material) placed in the working chamber, which are then transferred and deposited onto the surface of the workpieces. In this operation, the target is exposed to a technological vacuum, consisting of process gas and high voltage. At the end, the workpiece surfaces are cleaned and activated by the plasma installed in the machine. This solution offers virtually unlimited possibilities for coating any type of surface. In order to meet all demands and requirements, the KOLZER magnetron sputtering machine meets the hig ...
Key data: 800 mm, 1900 kg
A favourable price and quality are not a contradiction at Hanst Tec - after all, there is the FORMAXX Z series. Conventional die-sinking EDM systems designed in such a way that their price enables cost-effective hourly rates, while the technology fulfils all the quality criteria that are typical for Hanst Tec: - easy to operate - reliable Traverse paths: X - 500, Y - 400, Z - 350 mm maximum distance Table - working head: 275-625 mm Workpiece load: 1900 kg The machine is in good condition, and available immediately!
These used compact and versatile cold rolling line is completely modular and do have two bull blocks and works in addition with modular descalers, lubricant unit, stress relieving device, as well as with a pay-off and horizontal 3 ton spooler
filling amount: 180 linjection pressure: 1,3 bar: 700 l/mindiameter: 800 mmvoltage: 400 Vfrequency: 50 Hzdimensions: ca. 1200x1300x1100 mmweight of the machine ca.: 300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
