We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
On behalf of a customer, we are selling a used EOSINT M280 in very good condition. The machine has always been serviced by EOS, last service 09/2023. Laser unit was renewed at approx. 10,000h., - Dual mode operation (argon and nitrogen), - CPM - M280 Comfort Powder Module, - recirculating filter system LAS 400N, - Gas Filter System M280, - Laser cooling air/water, Material sets:, - Maraging Steel MS1, - Stainless Steel 316L, - Stainless Steel GP1, - Stainless Steel PH1, - Hastalloy X, - Inconel 625, - Inconel 718, - CoCrMP1, - AlSi10Mg, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 2200x1070x2290, Recommended pitch size in m: 4.8x3.6x2.9 minimum, Weight in kg: about 1250, Power supply: 32 A, Power consumption: maximum 8.5 kW / typically 3.2 kW, compressed air requirement: 7,000 hPa; 20m3/h, software: PSW3.8, laser type: Yb fiber laser, 400 watts, precision optics: ...
used
Used EOS M280 Direct Metal Laser System for sale., laser type: Yb fiber laser, 200 watts, precision optics: F-Theta lens, high speed scanner, scanning speed: up to 7.0 m/s, Layer thickness: 0.1-0.5mm, Installation space in mm (x/y/z): 250x250x325, building material: Light metal, stainless steel, tool steel, super alloys, support material: Not mandatory, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 2200x1070x2290, Recommended pitch size in m: 4.8x3.6x2.9 minimum, Weight in kg: about 1250, Variable focus diameter: 100 - 500 microns, Power supply: 32 A, Power consumption: maximum 8.5 kW / typically 3.2 kW, Nitrogen generator: integrated, compressed air requirement: 7,000 hPa; 20m3/h, software: EOS RP Tools; EOSTATE Magics RP (Materialize), file formats: STL. Optional: Converter to all common formats
used
The high-end PRECIOUS M 080 system from EOS was developed for the additive manufacturing of precious metal parts for the watch and jewelry industry. Designs can be realized within a few hours and without investing in tools. The system builds the parts layer by layer, melts fine metal powder with a laser and creates extremely complex shapes such as free-form surfaces, hollow shapes and moving parts., The machine offered is fully functional., - Last maintenance in 10/2023, - Machine parameters for red, white and yellow gold, technology: DMLS (Direct Metal Laser Sintering), Construction volume: Diameter 80 x 95 mm, Dimensions machine unpacked: 800 x 950 x 2250 mm, Weight machine unpacked: 580 kg, Power connection: 200-240V, network connection: Ethernet, software: EOS RP Tools (optional), EOSPRINT, laser: Yb-Fibre Laser 100W, scanner: High-speed scanner, F-Theta lens, scanning speed: up to 7 ...
used
The high-end PRECIOUS M 080 system from EOS was developed for the additive manufacturing of precious metal parts for the watch and jewelry industry. Designs can be realized within a few hours and without investing in tools. The system builds the parts layer by layer, melts fine metal powder with a laser and creates extremely complex shapes such as free-form surfaces, hollow shapes and moving parts., The machine offered is fully functional., - Last maintenance unknown, - Machine parameters for red, white and yellow gold, technology: DMLS (Direct Metal Laser Sintering), Construction volume: Diameter 80 x 95 mm, Dimensions machine unpacked: 800 x 950 x 2250 mm, Weight machine unpacked: 580 kg, Power connection: 200-240V, network connection: Ethernet, software: EOS RP Tools (optional), EOSPRINT, laser: Yb-Fibre Laser 100W, scanner: High-speed scanner, F-Theta lens, scanning speed: up to 7.0 ...
used
The high-end PRECIOUS M 080 system from EOS was developed for the additive manufacturing of precious metal parts for the watch and jewelry industry. Designs can be realized within a few hours and without investing in tools. The system builds the parts layer by layer, melts fine metal powder with a laser and creates extremely complex shapes such as free-form surfaces, hollow shapes and moving parts., The machine offered is fully functional., - Last maintenance in 10/2023, - Machine parameters for red, white and yellow gold, technology: DMLS (Direct Metal Laser Sintering), Construction volume: Diameter 80 x 95 mm, Dimensions machine unpacked: 800 x 950 x 2250 mm, Weight machine unpacked: 580 kg, Power connection: 200-240V, network connection: Ethernet, software: EOS RP Tools (optional), EOSPRINT, laser: Yb-Fibre Laser 100W, scanner: High-speed scanner, F-Theta lens, scanning speed: up to 7 ...
used
Robot Laser Welding and Cutting Cell / Laser cutting and welding cell Year of manufacture 2018 Wenige Arbeitsstunden / not many working hours Robot Fanuc M-710iC/70 Control CNC: Fanuc R-30iB) + MFP Payload / lifting max: 70 kg Repeatability: ± 0.04 mm Working range: 2050 mm IP54 Fiberlaser source: IPG Photonics Model YLS-4000-S2T-Y16 Power: 4kW Cooling system. Two outputs optical and permanent connections of welding and welding Laser Cutting Heads / Two outputs optical and permanent connections of welding and laser cutting heads. Source dimensions: 856 x 806 x 1206 mm; Weight / weight: 330 kg; Power supply: 400–460 V/3P + PE at 50–60 Hz; Operating current at: 4000 W and 400 VAC: 20 A Laserschneidekopf / laser cutting head: HIGHYAG BIMO-FSC Laserschweißkopf / laser welding head: IPG Photonics. FLWO-D30 Vertical Welding: Fronius 7000 Doppe ...
used
For sale is a Renishaw AM250 in good condition including screening system. Laser hours: approx. 9800h.
used
Used SLM 280HL with twin laser and less than 2000h laser hours included:, - Sieving system PSH100 - sieve in good condition, was only used with Ti6Al4V, - vacuum suction cup, - Standard cooling unit, - powder container, - Residual powder Ti6Al4V, Installation: 2016, equipment: Sieving system PSH100 sieve in good condition, was only used with Ti6Al4V/vacuum suction cup/standard cooling unit/powder container/residual powder Ti6Al4V, Installation space in mm (x/y/z): 280x280x365, laser power: 400W, compressed air requirement: ISO 8573-1, 18l/ bar, Dimensions in mm (w x h x d): 1800 x 1900 (2400) x 1000, Weight in kg: approx. 1000, E-connection / consumption: 400 Volt 3NPE, 32 A, 50/60Hz, 6 KW/h, build speed: 35 cm3/Hour 35 cm3/Hour, practice layer thickness: 20-100μm, Min. track width / wall thickness: 180µm, Operative beam focus freely selectable: 100µm - 700µm, exposure ...