Manufacturer:
(Category: 104)
A centerless cylindrical grinding machine König & Bauer (Koebau) is available. Grinding wheel width: 300mm, max. grinding diameter: 200mm, grinding wheel bore: 305mm. Control wheel width: 300mm, control wheel bore: 127mm, speed: 85rpm, max. workpiece length (plunge grinding): 300mm. Machine dimensions X/Y/Z: approx. 3150mm/2100mm/1850mm, weight: approx. 6000kg. On-site inspection is possible.
max. bore diameter to be ground: 6 bis 100 mmstroke - stepless adjustable: 550 mmgrinding depth: ca. 250 mmworkpiece weight: 150 kgtotal power requirement: 15 kWweight of the machine ca.: 4.300 kgdimensions of the machine ca.: 2,7 x2,4 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 450 mm Länge x-travel: 500 mmworkpiece height: . mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area: 225 mmtable-size: L:550 mmtable-size: B:200 mmsanding disc diameter: 200mm mmmagnetic plate size: 500 mmweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2000x1600x2100 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 80 - 700 mmworkpiece-spindlehead motor: 0,25 kWgrinding wheel diameter: 125 mmturning speeds: 2850 U/mingrinding range: -20 bis +20 Gradweight of the machine ca.: 12 Kgdimensions of the machine ca.: 700 x 400 x 300 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
volt: 380 V: . quality: schwere, stabile The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. dia. of grinding wheel: 150 mmgrinding wheel width: 25 mmtaper diameter: 32 mmconnected load frequency: 230 Vengine output: 0,5 KWweight: 16 kgdimensions: 0,5 x 0,26 x 0,22 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1000 x 600 mm magnetic plate size: 1000 x 600 mmgrinding height: max 400 mmgrinding wheel width x diameter: 400 x 60 x 127 mmdimensions: 3900 x 20 50 x 2400 m: ja weight of the machine ca.: 6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding range: 8 - 32 mmsharp cornered angle min./max.: 90 - 140 Gradconnected load: 230 Vweight of the machine ca.: 16 Kgdimensions of the machine ca.: 0,43 x 0,24 x 0,24 mDrill grinding machine:Additional station for grinding back the drilling cutting surface (clearance angle)25tk. Collets ER 40 are included in the scope of delivery, these are also suitablefor clamping intermediate sizes. For grinding twist drills made of HSS andHard metals with a TiN layer of 8 - 32 mm.Rotor with precision ball bearings guarantees smooth running.Vibration-free running thanks to its heavy weight and rubber feet.Sharpening angle adjustable for all common twist drills.Package dimensions:430 x 240 x 240mm.Weight 16kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 250 mmno. of working stations: 2 Stückconnected load frequency: 230 Vturning speeds: 2850 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 25 Kgdimensions: 0,65 x 0,32 x 0,35 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 200 x 32 mmgrinding wheel hole diameter: 30 mmtotal power requirement: 0,9 kWweight of the machine ca.: 35 Kgdimensions of the machine ca.: 620 x 540 x 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 250 mmconnected load frequency: 230 V: 90 - 180 U/minweight of the machine ca.: 18 Kgdimensions: 470 x 300 x 440 mKnife sharpening device with variable speedGrinding wheel 250 x 50 x 12mm, grit 220Leather disc 200 x 30 x 12mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sanding length: 500mm, sanding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, sanding wheel diameter: 225mm, sanding wheel width: 25mm, sanding wheel bore: 51mm, speed: 4200rpm, machine weight: approx. 2500kg. On-site inspection is possible.
Table dimensions X/Y: 600mm/200mm, grinding dimensions X/Y: 600mm/250mm, magnet dimensions X/Y: 600mm/200mm, grinding wheel diameter: 225mm, grinding wheel width: 25mm, grinding wheel bore: 51mm, spindle center-to-table distance: 350mm (+/-50mm), table feed: 20m/min, creep speed: 0mm/500mm/min, speed: 4200rpm, machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, weight: approx. 2500kg. On-site inspection is possible.
A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.
A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible.
Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.
A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible.
Working width: 900mm, max. workpiece height: 100mm, sanding units: 1, sanding belt dimensions X/Y: 2620mm/1150mm, feed speed: 2m/min-14m/min, compressed air requirement: 1800m³/h, operating pressure: 5bar-7bar, weight: approx. 1800kg. The feed belt is no longer grippy. Documentation available. On-site inspection is possible.
Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible.
Two Loeser centerless round polishing machines are available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine with input and output table: 1000mm/1000mm. Including magazines and input and output table. Documentation available. On-site inspection is possible. Expected to be available from April 2025.
A Karstens cylindrical grinding machine from 1992, which was completely overhauled and modernized in 2014, is available. Center width: 1000mm, center height: 180mm, grinding diameter: 360mm, max. workpiece weight center/flying: 250kg/70kg, grinding wheel diameter: 400mm. Spindle holder: MK4, speed: 450rpm, swivel range: 90°, quill holder: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, infeed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Including 3x centering points and grinding wheels as good as new. Documentation available. On-site inspection is possible.
Table dimensions X/Y: 760mm/200mm, max. sanding length: 500mm, max. sanding width: 230mm, table spindle center distance: 520mm, table longitudinal movement: 30m/min, table transverse movement: 16mm/stroke. Grinding wheel diameter: 225mm, grinding wheel width: 25mm, bore: 51mm, power: 5kW. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1950mm, weight: approx. 2100kg. On-site inspection is possible.
A Karstens cylindrical grinding machine with display is available. Center height: 180mm, grinding diameter: 360mm, center width: 650mm, max. workpiece weight flying/between centers: 70kg/250kg. Grinding wheel outer diameter: 400mm, face diameter: 250mm, peripheral speed: 35m/s, speed: 450rpm, mounting cone: MK4, quill diameter: 50mm, fine adjustment: 0.08mm. Machine dimensions X/Y: approx. 3250mm/2150mm, weight: approx. 3600kg. On-site inspection is possible.
A hand sanding station from Aurtec is available. Sanding belt width: 150mm, belt length: 3500mm, belt thickness: 4mm, speed: 500rpm. Documentation available. On-site inspection is possible.
Bore: 50mm, grinding depth: 80mm, spindle axis-table center distance: 145mm, grinding wheel holder: 540mm, taper: Morse 4, workpiece spindle bore: 28mm, workpiece spindle swivel: 10°/30°, grinding spindle swivel: 130mm, grinding spindle transverse movement: 30mm, table longitudinal movement: 4mm/80mm, cooling pump capacity: 140l/min. Machine dimensions X/Y/Z: approx. 2100mm/1000mm/1400mm, weight: approx. 1600kg. Including accessories and calibration measuring device. The machine was overhauled in 2002. Documentation available. On-site inspection is possible.
Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.
Center height: 175mm, grinding length: 650mm, B-axis: -15°/195°, workpiece speed: 1750rpm, grinding wheels T1/T2: 500mm/400mm, bore: 203mm, max. workpiece weight: 80kg, workhead: MK4, tailstock: MK3. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/2100mm, weight: approx. 4000kg, operating hours: 56300h, control: GE Fanuc Series 16i-T. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025.
Sanding length: 650mm, max. sanding diameter: 508mm, center height: 125mm, workhead speed: 1500rpm, max. workpiece weight: 30kg, workpiece swivel range: 30°-90°, tailstock: MK3. Grinding wheel diameter: 508mm, grinding wheel width: 40mm, bore: 203mm, max. internal grinding diameter: 150mm. Machine dimensions X/Y/Z: approx. 4300mm/3100mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik 820G. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025.
Sanding width: 200mm, sanding length: 600mm, adjustment path X/Y: 690mm/230mm, clamping table spindle center distance: 500mm, sanding wheel diameter: 200mm, sanding wheel width: 20mm, bore: 51mm, table dimensions X/Y: 200mm/600mm, max. table load: 110kp, machine dimensions X/Y/Z: approx. 3000mm/1600mm/2100mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.
