Manufacturer:
(Category: 105)
Additional Information :HB controlled descent device.Technical data:Blade: 2450 x 27 x 0.9 mmPower: 0.70 / 0.81 kWCutting speed: 46 / 92 m/minVise: 245 mmCutting capacity at 0°: 225 / 200 / 24 x 160 mmCutting capacity at +45°: 160 / 140 / 155 x 115 mmCutting capacity at +60°: 90 / 90 / 90 x 90 mmPower supply: 3 PhYear: 2017Dimensions: 700 x 1730 x 1810 mmWeight: 240 kgRemarks: Serial No.: 900408.
Machine number 6418106052material discharge length approx. 1600 mmwith feed length approx. 2200 mmmax. material span approx. 250 mm (measured)max. material clamping height approx. 200 mm (measured)with discharge roller conveyors, 2 pieceseach approx. 1000 mm lengthmax. load t/mtotal material removal length approx. 4000 mmwith spare saw blades, approx. 8 pcs.Reference: Prologtec Lot 3
Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg
Max. power consumption 205 W, max. speed: 1500 strokes/min, stroke length: 19 mm, tilting work table: 0-45°, table dimensions: approx. 360 x 180 mm
Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg
In its original box. Never used. Motor: 3.5 kW Carton size: 63 x 36 x 47
- Disc diameter 180 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-54
cutting diameter: 335 mmsaw band length: 4400 mmtable height: 750 mm: 500 mm: 335 mm: 500 x 335 mm: re. 330 li. 305 mmcutting speed: re. 320x335 li. 305x335 mmdown speed: re. 180 mmdimensions of saw-band: re. 170 x 335 mmworkpiece weight: 18 - 115 m/mincapacity 90 degrees: round: 0 - 300 mm/min.capacity 90 degrees: flat: 4400 x 34 x 1,1 mmcapacity 45 degrees: round: max. 250 kg/m: 4,0 kWwork height max.: 2400 kgconnected load: 3500 x 2350 x 1900 mmFeatures:- Material bundle clamping- Automatic feed- Laser light for cut line indication- Micro-dosing device- Motorized chip brush- Clamping pressure control on the control panel- Fully automatic sawing process after entering the length and quantity- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 4380x34x1,1 mm: 20-100 m/min: 325 mm: 325 mm: 400x325 mm: rund 325 mm, quadrat 325 : rund 300 mm, quadrat 265 : rund 190 mm, quadrat 190 : 655 mm: 1.1 kW: 2.2 kW: 0.12 kW: 2130 mm: 2150 mm: 1650 mm: 1860 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 38.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 540 mm: 540 mm: 750x540 mm: rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm: 4 kW: 0.12 kW: 3000 mm: 1300 mm: 2150 mm: 2445 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frame3° inclined saw banduser manual in GERMAN or ENGLISH(the vertical hydraulic clamping shown on the photos ist op ...
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 16700 €: 320.64 €: Schwenkrahmen : 4800x34x1,1 mm: 15 - 120 m/min: 360 mm: 360 mm: 510x360 mm: rund 360 mm, quadrat 360 : rund 250 mm, quadrat 220 : rund 280 mm, quadrat 260 : 860 mm: 0.37 kW: 3 kW: 0.12 kW: 2650 mm: 1210 mm: 1870 mm: 1450 kgHydraulic viceInverter for contious variable band speedContinuously adjustable saw arm lowering speedHydromechanical blade tension can be read via pressure gaugeControl panelChip brushCoolant equipmentOperating instructions in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 46400 €: 886.24 €: Doppelsäulenführung : 6800x41x1,3 mm: 20-100 m/min: 560 mm: 820 x 540 mm: rechteck 550 x 540 mm : rechteck 360 x 540 mm : rechteck 550 x 540 mm : 880 mm: 1.1 kW: 4 kW: 0.12 kW: 3800 mm: 1750 mm: 2350 mm: 3200 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISH(roller table see photo - optional available, additional price ...
: neu : ca. 4 Monate ab Auftragse : Türkei : 61300 €: 1158.57 €: Doppelsäulenführung : 6000 x 41 x 1,3 mm: 20 - 100 m/min: 560 mm: 560 mm: 600 x 560 mm: 810 mm: 2.2 kW: 5.5 kW: 0.12 kW: 3250 mm: 2200 mm: 2350 mm: 4500 kgHydromechanical band tensionContinuously variable bandspeed (inverter)Linear guideFeed vice with servo drive with 700 mm stroke or 9.999 mm for multi-strokeControl panel with touchscreen (50 cutting lengths / 30 programs)Planetary gearboxSaw pressure adjustmentBand deflection sensorCoolant deviceChip brushOptical height adjustmentOPTIONEN: Hydraulicupper clamping Micro cooling unit Roller table3 m Laser cutting lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 11100 €: 213.12 €: Schwenkrahmen : 3660x27x0,9 mm: 20-100 m/min: 320 mm: 300 mm: 320x300 mm: 640 mm: 0.37 kW: 2.2 kW: 0.12 kW: 1900 mm: 850 mm: 1300 mm: 770 kgRoller material feed with manual adjustable length stop with limit switchblade brushcontrol panelheight adjustment bar with limit switchhydromechanical blade tensioninverterhydraulic vicecoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2026 : 060216 : prompt, Zwischenverkauf v : Türkei : 20700 €: 397.44 €: 1 : Schwenkrahmen : 5200x34x1,1 mm: 20-100 m/min: 440 mm: 440 mm: 610x440 mm: rund 410 mm, quadrat 410 : rund 320 mm, quadrat 250 : rund 410 mm, quadrat 410 : rund 320 mm, quadrat 285 : 860 mm: 0.55 kW: 3 kW: 0.12 kW: 2800 mm: 1210 mm: 1870 mm: 1540 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISHOPTIONS:Roller table ...
: neu : ca. 10 Wochen ab Auftrags : Italien : 58000 €: 1096.2 €: Schwenkrahmen : 3120 x 27 x 0,9 mm: 15 - 101 m/min: 280 mm: 240 mm: 310 x 240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 5150 mm: 3200 mm: 1950 mm: 5000 x 2200 x 1900 mm: 2150 kgCNC control with 7", touchscreen for the following functions:Feed length, workpiece count, and automatic saw frame rotation for frame adjustmentAutomatic feed 3000 mm / strokeVariable cutting pressureMachine with infinitely variable speedCoolant systemMotorized chip brushChip conveyorAutomatic saw blade breakage monitoringHydraulic vicesRecommended max. diameter of solid material in automatic mode: 150 mmOperating manual in German or EnglishOPTIONS:Hydraulic bundle clamping device, micro-spray device, variable clamping pressure,10", s ...
- 1 x KLAEGER band saw HBA 265 built in 2001 - 1 x KLAEGER band saw HBA S265 built in 2008
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 9400 €: 181.42 €: Schwenkrahmen : 2730x27x0,9 mm: 35-70 m/min: 230 mm: 230 mm: 240x230 mm: 590 mm: 0.37 kW: 1.3 kW: 0.12 kW: 1700 mm: 800 mm: 1500 mm: 530 kgblade brushcontrol panelheight adjustment switchhydromechanical blade tensioninvertermechanic top clampingmaterial length stopcoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2023 : 6242 : prompt, Zwischenverkauf v : Italien : 5400 €: 1 : Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 220 mm: 260x140 mm: rund 160 mm, quadrat 155 : rund 95 mm, quadrat 95 mm : 965 mm: 1200 mm: 1100 mm: 1860 mm: 240 kgdemo machine / mint conditionnet price (price for new machine € 6.730,00)manual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentOPTIONS:Roller tables and band saw blades on requestBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-masch ...
cutting diameter: 420 mmsaw band length: 5744 x 1,3 x 41 mmcutting width: 420 mmcutting speed: 15 - 110 m/min: 7,5 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,9 x 2,4 x 2,1 mHydraulic band saw machine with- Material feed 1000mm- Motorized saw blade tension- Emergency stop device- Replacement saw bandsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis SCHÃCO PDG E CUT was manufactured in 2009. It features a maximum saw blade diameter of 600 mm and operates at a motor speed of 2410 minâ»Â¹. The machine includes a discharge conveyor belt and an extraction system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the SCHÃCO PDG E CUT double mitre saw we have for sale. Contact us for further details.
saw blade diameter:400 mmcutting diameter:400 mmmaterial:Vollmaterial 20 - 130 mmmaterial:Walzprofile 40 - 120 mmmaterial diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mmsawblade width:4 mmtotal power requirement:5,1 kWweight of the machine ca.:1850 kgdimensions of the machine ca.:3300 x 1630 x 1960 mmDocuments:vorhanden
Cutting height:150 mmsaw band length:2400 mmcutting width:350 mmtotal power requirement:380 Vweight of the machine ca.:350 kgdimensions of the machine ca.:800 x 950 x 1650 mm
saw blade diameter:400 mmtotal power requirement:380 V, 1,7/2,6 kWweight of the machine ca.:850 kgdimensions of the machine ca.:1100 x 1050 x 1620 mm
cutting diameter:260 mmband length:450 x 4 x2 mmtotal power requirement:22,6 kWweight of the machine ca.:1024 kgdimensions of the machine ca.:1500 x 2310 x 955 mmsquare:240 x 240 mmflat material:260 x 180 clamping capacity:40 barDocuments:vorhanden
saw blade diameter:400 mmtotal power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m
total power requirement:380V 50 HZ,1,67 kWdimensions of the machine ca.:1,4 x 1,8 x 1,4 m
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 €: 569.18 €: Schwenkrahmen : 3660x27x0,9 mm: 15-120 m/min: 320 mm: 320 mm: 350x320 mm: rund 170 mm, quadrat 150 : rund 260 mm, quadrat 220 : rund 320 mm, quadrat 280 : 740 mm: 1.1 kW: 2.2 kW: 1 kW: 0.12 kW: 2120 mm: 2100 mm: 1810 mm: 1810 kgNC control panelservo feed with ballscrew spindleshydraulic vicehydromechanical blade tensioninvertercoolant pumpsaw bladeblade brushsecurity switchheight adjustmentuser manual in GERMAN or ENGLISHOPTION:hydraulic blade tentioningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
290 € 
