Manufacturer:
(Category: 105)
- Smallest diameter 10 mm- Shortes length singel stroke 15 mm- Shortes length automatic mode 100 mm- Working height 700 mm- Max. stroke 9999 mm- Control panel - Memory 99 program with - Bundel clamp device - New price 45.000
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 54900 €: 1037.61 €: Doppelsäulenführung : 5400x41x1,3 mm: 20-100 m/min: 440 mm: 440 mm: 610x440 mm: rund 440 mm, quadrat 440 : rund 430 mm, quadrat 430 : rund 320 mm, quadrat 260 : 807,5 mm: 1.1 kW: 4 kW: 0.12 kW: 2850 mm: 2350 mm: 2000 mm: 3600 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 800 x 800 x 1500 mmcutting diameter: 200 mmstroke: 150 mmdimensions of the machine ca.: mtotal power requirement: 3 kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9032 Type: Mec3000 Producer: Simec Created: 2019 Parameters: Switch-on hours: 9365 h Input length of the material: 6000–7000 mm. Parting diameter: 12–100 mm. Output length: 50–2000 mm.
cutting diameter: 220 mmsaw band length: - mmcutting width: - mmtotal power requirement: 0,7 kWweight of the machine ca.: 0,240 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roller conveyor size L3000xW260mm Auction-ID: A1-44302-117
Cutting range round material: 220mm, cutting range flat material: 350mm/220mm, cutting range rectangular material: 220mm/220mm, saw band dimensions X/Y/Z: 3720mm/27mm/1mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 2400mm/1900mm/1500mm, weight: approx. 1350kg, operating hours: approx. 1450h. The drive cylinder must be sealed. Documentation available. An on-site inspection is possible.
cutting speed: 15 - 125 m/mincross cutting section: 260 mm²band length: 4.115 x 41 x 1,1 mmcutting width: 260 x 260 mmBand Saw | KASTO - SSB 260 VAThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SSB260VA | SSB-260VA | SSB260 VA | SSB 260VAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting speed: 15 - 125 m/mincross cutting section: 260 mmband length: 4.115 x 41 x 1,1 mmcutting width: 260 x 260 mmBand Saw | KASTO - SSB 260 VAThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SSB260VA | SSB-260VA | SSB260 VA | SSB 260VAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 3650x27x0,9 mmspeed: 15/100 m/mincapacity 90 degrees: round: 280 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270x200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mmtotal power requirement: 2,2 kWweight: 1240 kgvice: 340 mmdimensions: 2020x2040x1740 mmControl: Electro-hydraulic fully automatic band saw with additional, semi-automaticFunction, for cuts from 0 ° to 60 ° left.Compact machine with the new Windows CE based MEP-50 controllerand 7 touch-screen display for managing all machine parameters.Easy operation and control of all cutting parameters in real time.Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings,Single stroke 600 mm - rep ...
A metal band saw is sold. Suitable for someone who has little space available. Dismantling and removal by buyers Pallet truck and a 1.6t forklift on site. Price is 2500 Euro net plus VAT Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Item location 90766 Fürth All information without guarantee
cutting diameter: 250 mmband length: 400 mmcapacity 90 degrees: square: 220 x 220 mmcapacity 90 degrees: flat: 250 x 130 mmcutting speed: 11/19/32 m/mintotal power requirement: 2 kWweight of the machine ca.: 400 Kgdimensions of the machine ca.: 1700 x 550 x 1270 mmHydraulic hacksaw with:- Electric-hydraulic raising and lowering of the saw frame- Coolant system- Good condition- Saw blades-- Saw blade dimensions 400 x 45 x 2.0 mm- Max. opening width of the vice 405 mm- Adjustable stroke speeds and cutting speeds- Mitre-adjustable viceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 335 mmsaw band length: 4400 x 34 x 1.1 mmcapacity 90 degrees: flat: 500 x 335 mmcapacity 45 degrees: round: 305 mmcapacity 45 degrees: flat: 305 x 335 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 335 mmclamping range: 0 - 500 mmwork height max.: 750 mmcoolant capacity: 100 lengine output: 3.0 kWweight: 1320 kgrange L-W-H: 1450 x 2350 x 1950 mm in a well-kept condition current new price machine approx. 35.000 euros special price on requestEquipment:- robust electro-hydraulic mitre bandsaw semi-automatic (INDUSTRY) Particularly suitable for universal use in a variety of applications. cross-sections, materials and frequently changing miter cuts Semi-automatic sawing sequence with workpiece clamping-sawing-raising- Central machine operation- stepless manual miter adjustment miter adjustment 45°li - 90° - 45°re - 30°re Digital actual angle ...
used
Cutting area round/square: 190/190 x 190 mm Cutting area in mitre 45° round/rectangle: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm 1 Lifting speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Space requirement: 1200 x 600 x 980 mm
saw blade diameter: 350 x Ø 32.0 mmcapacity 90 degrees: flat: 175 x 75 mmcapacity 90 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 100 x 80 mmcapacity 45 degrees: square: 85 x 85 mmturning speeds: 3000 U/mintotal power requirement: 1.5 kWweight of the machine ca.: 180 kgdimensions of the machine ca.: 870 x 710 x 1435 mmEquipment :- semi-automatic circular saw for cutting PVC and aluminum profiles- two-hand safety operation- Miter adjustment : left 0 / - 45 / - 60 right 0 / 45 / 90- Large protective hood, covers entire working area- Saw blade- 2x vertical pneumatic clamping cylinders- Adjustable blade and cutting feed- Air dust gunWork sequence1) Setting the cutting angle2) Inserting the material3) Adjusting the stroke speed4) Bring the clamping cylinder up to 20 mm of material5) Clamp the material6) The machine is ready for operation by pressing the start button.7) Press and h ...
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,27 tdimensions: 1,1 x 0,95 x 1,7 m- Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hoodThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mmcapacity 90 degrees: round: 135 mmcapacity 90 degrees: square: 130 mm: 200 x 80 mmsaw blade turning speeds: 12 / 25 m/mintotal power requirement: kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 1,2 x 0,9 x 1,8 mCold circular saw- Semi-automatic- Hydraulic clamping- Coolant system- Protective cover- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 260 mmband length: 450 x 40 x 2 mmcapacity 60 degrees: square: 240 mm: 260 x 180 total power requirement: 2,0/2,6 kWweight of the machine ca.: 1,4 tdimensions: 2,1 x 1,7 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 320 mmband length: 535 x 40 x 2,0 mmcapacity 90 degrees: square: 300 mmcapacity 90 degrees: flat: mmcutting speed: m/minno. of strokes: 45 - 62 - 90 - 125 Hub/mintotal power requirement: 3,0 kWweight of the machine ca.: 0,35 Kgdimensions: 1,4 x ,4 x 1,2 mHydraulic bow saw with:- Coolant system- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 450 mmsaw band length: 6600 x 41 x 1,3 mmtable height: 800 mm: 450 mm: 450 mm: 450 x 270 mmworkpiece weight: 15 - 95 m/min: 7,5 kWwork height max.: 3000 kgconnected load: 3750 x 1400 x 2100 mmControl: NEW PRICE ~ 40.700 EUROvery good conditionSemi-automatic bandsaw, two-column guidedEquipment:- hydraulic vice- infinitely variable cutting speed- chip conveyor- line laser- driven chip brush- coolant device- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible.
Offer 26014 Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Material replenishment machine - Discharge roller conveyor 4000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2300 x H 1750 x D 2200 mm - Weight approx. 1800 kg
cutting diameter: 220 mmcapacity 90 degrees: square: 220 x 220 mmturning speed range:: 20 - 140 m/minsaw band length: 3720 x 34 x 1.1 mmheight of material-table: 825 mmcoolant capacity: 80.0 ltotal power requirement: 2.5 / 3.5 kWweight of the machine ca.: 1500 kgrange L-W-H: 2350 x 2050 x 1500 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8Equipment:- electro-hydraulic band saw - FULLY AUTOMATIC- for sawing hollow profiles and solid materials made of steel, stainless steel,. tool steel, non-ferrous metals and plastic- control panel on the front right including button for manual operation (setup/individual cut)- electro-hydraulic material clamping- stepless cutting speed .. 20-140 m/min.- electro-motor chip conveyor- manual adjustment of the material feed range via handwheel including analogue value display- automatic height adjustment of the saw fra ...
A precision circular saw Rohbi is available. Solid material cutting range: 50mm, tube and profile cutting range: 50-60mm, max. saw blade diameter: 225mm, bore: 20mm, speed: 1400rpm, max. feed length: 600mm, max. cutting length: 160mm. Machine dimensions X/Y/Z: approx. 1700mm/850mm/1600mm, weight: approx. 400kg. An on-site inspection is possible.
cutting diameter: 325 mmsaw band length: 4200 mmcutting width: 500 mm: 15 - 150 m/min.work height max.: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 4200 x 34 x 1,1 mmcapacity 90 degrees: round: 325 mmcapacity 90 degrees: flat: 500x300 mm: 300 mm: 300x300 mm: 200 mm: 200x200 mmweight of the machine ca.: 1250 kgdimensions of the machine ca.: 2250 x 2100 x 1280 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 90 degrees: flat: 400 x 260 mm: 250 mm: 240 x 240 mm: 240 x 260 mm: 250 mm: 250 x 250 mm: 290 x 250 mmcapacity 60 degrees: round: 160 mmcapacity 60 degrees: square: 160 x 160 mmcapacity 60 degrees: flat: 110 x 260 mm: 190 mm: 190 x 190 mm: 210 x 190 mmdimensions of the machine ca.: 1700x2000x1600 mmweight of the machine ca.: 960 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 1106479 : 400 miter: ja cooling: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 255 mmdimensions of saw-band: 2750 x 27 x 0,9 mmcutting width: 200 x 320 mmcutting speed: 20 bis 80 m/min: 125 mm: 125 x 125 mm: 195 mmImpact energy: 350 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 290 Kgdimensions: 1,1 x 0,8 x 1,75 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
20 € 
