Manufacturer:
(Category: 105)
Max. diameter of the cut material ... 300mm Control Siemens ... Simatic S7-1200 Machine weight ... 1420kg L x W x H ... 2600x2080x2140mm The machine is in good condition. if possible under power.
cutting diameter: 360 mmsaw band length: 6.300 mmcutting width: 700 mmtable height: 800 mmtotal power requirement: 14 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: mAutomatic Horizontal Band SawCutting Capacity at 90° (Round): Ø 360 mmCutting Capacity at 90° (Rectangular): 700 x 340 mmCutting Capacity at 75° Mitre (Left & Right):Ø 340 mm / 650 x 340 mmCutting Capacity at 60° Mitre (Left & Right):Ø 340 mm / 600 x 340 mmCutting Capacity at 45° Mitre (Left & Right):Ø 340 mm / 400 x 340 mmMaximum Cutting Diameter: 360 mmMaximum Cutting Width: 700 mmMaximum Cutting Height: 340 mmMinimum Cut-Off Length: 35 mmMinimum Workpiece Size: 10 x 10 x 10 mmRemnant Length (Manual): from 10 mmRemnant Length (Automatic): from 160 mmBlade Tension: 85 barCoolant Tank Capacity: 150 lBlade Speed: 19 – 130 m/minMain Drive Motor: 5.5 kWHydraulic Pump Motor: 5.5 kWCoolant Pump Motor ...
work piece width: 1.200 mmworkpiece height: 500 mmbore diameter: 8 - 40 mmNumber of drilling agregates: 3 Stk.spindle speed:: 150 - 1.100 U / mintool changer: 15 Stksaw blade diameter: 1.430 mmcutting speed: 8 - 30 m/mintotal power requirement: 43 kWweight of the machine ca.: 20 tdimensions of the machine ca.: mWorking CapacityAngle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mmChannel sections: 80 × 45 mm to 400 × 110 mmI-beams: 80 × 46 mm to 600 × 220 mmWide flange beams (HE): 100 × 100 mm to 1,008 × 302 mmSpecial wide flange and welded T-beams: up to 1,200 × 500 mmWorkpiece DataMax. workpiece width: 1,200 mmMax. workpiece height: 500 mmDrilling UnitNumber of drilling spindles: 3 (1 vertical, 2 horizontal)Drilling diameter: 8 – 40 mmSpindle speed: 150 – 1,100 rpmDrilling feed: 0 – 500 mm/minRapid approach: 3,850 mm/minRapid return: 8,000 mm/minPositioning speed: 15,00 ...
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 16700 €: 320.64 €: Schwenkrahmen : 4800x34x1,1 mm: 15 - 120 m/min: 360 mm: 360 mm: 510x360 mm: rund 360 mm, quadrat 360 : rund 250 mm, quadrat 220 : rund 280 mm, quadrat 260 : 860 mm: 0.37 kW: 3 kW: 0.12 kW: 2650 mm: 1210 mm: 1870 mm: 1450 kgHydraulic viceInverter for contious variable band speedContinuously adjustable saw arm lowering speedHydromechanical blade tension can be read via pressure gaugeControl panelChip brushCoolant equipmentOperating instructions in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4-6 Monate ab Auftrag : Türkei : 30900 €: 590.19 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 560 mm: 560 mm: 570x560 mm: 590 mm: 1.1 kW: 4 kW: 0.12 kW: 500 mm: 1050 mm: 2050 mm: 2242 kgNC controldouble column band saw3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninverterlinear wayoptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchgearboxuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Italien : 10370 €: 199.1 €: Schwenkrahmen : 3120 mm: 35/70 m/min: 280 mm: 240 mm: 350x140 mm: rund 230 mm, quadrat 200 : rund 150 mm, quadrat 130 : rund 200 mm, quadrat 170 : 830 mm: 1550 mm: 1400 mm: 1750 mm: 420 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentdigital readout for mitre cutsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Italien : 25680 €: 490.49 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 (PLC) m/min: 20-100 (CNC/Touch) m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 220 mm: 835 mm: 0.37 kW: 0.12 kW: 3220 mm: 2050 mm: 1900 mm: 1090 kgVERSION PLC: adjustment of material feed by handwheel, counter and limit switchVERSION CNC:feed lenght and numbers by CNC (99 progamms)VERSION TOUCH: as CNC but with 7", touchscreen for easier operationautomatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declampautomatic feed 800 mm/strokechip conveyer (CNC/Touch)variable cutting pressureMachine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch)cutting fluid systemautomatic saw blade breakage detectionhydraulic vicessuggested max. diam. in automatic mo ...
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 €: 569.18 €: Doppelsäulenführung : 5400x41x1,3 mm: 20-100 m/min: 450 mm: 425 mm: 695 x 425 mm: rund 430 mm, quadrat 425 : rund 320 mm, quadrat 290 : 690 mm: 0.55 kW: 4 kW: 0.12 kW: 3090 mm: 1200 mm: 1940 mm: 1630 kgdouble linear guideshydraulic-mechanical bandtensionsaw bandbrushinfinitely variable cutting speedsensitive cut regulationbi-metal saw band 41coolant devicethermal overload protectionheavy duty gearoptical height adjustment3 ° inclined bandhydraulic clamping of the viceuser manual in GERMAN or ENGLISHOPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 5100 €: 98.43 €: 315 mm: 315x32x63 mm: 45 / 90 U/Min: rund 105 mm / quadratisch : rund 90 mm / quadratisch : 4.7 kW: 600 mm: 1000 mm: 1400 mm: 200 kgPneumatic viceLow-voltage start/stop switch in the handle45-degree left and 45-degree right mitre cutsSplit visc (clamps before and after the sawblade)Self-centering visc for optimal cutting positionLarge base frame for high stabilitySawblade not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 36720 €: 701.35 €: Doppelsäulenführung : 3270 x 27 x 0,9 mm: 40 - 80 m/min: 300 mm: 300 mm: 330 x 290 mm: rund 210 mm, quadrat 210 : rund 110 mm, quadrat 110 : 840 mm: 0.75 kW: 1.5 kW: 0.06 kW: 3070 mm: 2060 mm: 1930 mm: 2400 x 1700 x 1700 mm: 1210 kgDouble-column guided automatic band sawVertical infeed by means of longitudinal ball bearing guidesFeed length and number of pieces via CNC (up to 99 programmes)Automatic cutting cycle with sensor pinAutomatic material feed 800 mm / strokeVariable cutting pressure and infeed speedInfinitely adjustable band speedCooling lubricant deviceChip brushChip conveyorHydraulic clamping vices for clamping during the cut and on the feed carriageOperating instructions in GERMAN or ENGLISHALTERNATIVE:Version with 7", touchscreen control, additionally included:Automatic preselection of cutting param ...
new
: neu : ca. 4 Monate ab Auftragse : Türkei : 50900 €: 962.01 €: Doppelsäulenführung : 5750 x 41 x 1,3 mm: 20 - 120 m/min: 420 mm: 420 mm: 420 x 420 mm: 805 mm: 1.1 kW: 5.5 kW: 1 kW: 0.12 kW: 2860 mm: 1980 mm: 2100 mm: 3700 kgServo feed with 700 mm strokeCutting length up to 9,999 mm (multiple feeds)Omron touchscreen, 50 different cutting lengths and 30 programs can be savedLinear guide41 mm saw bladeControl panelHydraulic viceHydromechanical blade tensionHeavy duty gearboxCoolant deviceSensitive pressureInverter for stepless blade speedChip brushOptical height adjustmentChip conveyorOperating instructions in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter:400 mmcutting diameter:400 mmmaterial:Vollmaterial 20 - 130 mmmaterial:Walzprofile 40 - 120 mmmaterial diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mmsawblade width:4 mmtotal power requirement:5,1 kWweight of the machine ca.:1850 kgdimensions of the machine ca.:3300 x 1630 x 1960 mmDocuments:vorhanden
Cutting height:150 mmsaw band length:2400 mmcutting width:350 mmtotal power requirement:380 Vweight of the machine ca.:350 kgdimensions of the machine ca.:800 x 950 x 1650 mm
saw blade diameter:400 mmtotal power requirement:380 V, 1,7/2,6 kWweight of the machine ca.:850 kgdimensions of the machine ca.:1100 x 1050 x 1620 mm
cutting diameter:260 mmband length:450 x 4 x2 mmtotal power requirement:22,6 kWweight of the machine ca.:1024 kgdimensions of the machine ca.:1500 x 2310 x 955 mmsquare:240 x 240 mmflat material:260 x 180 clamping capacity:40 barDocuments:vorhanden
saw blade diameter:400 mmtotal power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m
total power requirement:380V 50 HZ,1,67 kWdimensions of the machine ca.:1,4 x 1,8 x 1,4 m
roll diameter:420 mmthroat:400 mmworkpiece height:325 mmtable surface area:615 x 615 mmtable swivelabel +/-:10/45 °table - inclinable:+/- 20 °cutting speed:20 - 2500 m/mintotal power requirement:2 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,95 x 0,65 x 1,83 m
: gebraucht : 2023 : 6246 : prompt, Zwischenverkauf v : Italien : 2970 €: 1 : 300 mm: 300 x (2)2,5 x 32 mm: 33/66 U/Min: 45 °: 45 °: rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 500 mm: 1050 mm: 990 mm: 135 kgdemo machine / mint conditionnet pricevice with quick clamping device and additional clapming strip for reduced cuttinag burrreduction gear and clutch to save the gear and sawing bladescoolant equipmentsaw blade protectionmaterial gaugepedestal1 saw bladeoperating manual in German or EnglishBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE ...
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 104600 €: 1976.94 €: Doppelsäulenführung : 10430x54x1,6 mm: 20-100 m/min: 750 mm: 1300x700 mm: rechteck 850 x 750 mm : rechteck 570 x 750 mm : rechteck 850 x 750 mm : 930 mm: 4 kW: 11 kW: 0.12 kW: 5500 mm: 2280 mm: 3400 mm: 8500 kgHydraulic viceDigital display for angle indicationHydraulic saw arm clampingManual saw arm rotationContinuously adjustable saw arm lowering speedAutomatic saw frame lifting after cuttingSensitive cutting pressure regulation depending on material propertiesHydromechanical blade tension readable via pressure gaugeMobile control panelHeavy-duty, helical-toothed conical gearDriven chip brushBlade guidance via carbide plates and rollersAutomatic blade breakage protectionCoolant systemHydraulic saw frame liftingOperating instructions in GERMAN or ENGLISHOPTIONS:Roller tables and band saw blades on requestThe data fo ...
: neu : ca. 4 Monate ab Auftragse : Türkei : 82900 €: 1566.81 €: Doppelsäulenführung : 8400x54x1,6 mm: 20-100 m/min: 650 mm: 1000 x 600 mm: rechteck 660 x 600 mm : rechteck 440 x 600 mm : rechteck 660 x 600 mm : 880 mm: 4 kW: 7.5 kW: 0.12 kW: 4400 mm: 2270 mm: 2660 mm: 6520 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the softwar ...
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 11100 €: 213.12 €: Schwenkrahmen : 3660x27x0,9 mm: 20-100 m/min: 320 mm: 300 mm: 320x300 mm: 640 mm: 0.37 kW: 2.2 kW: 0.12 kW: 1900 mm: 850 mm: 1300 mm: 770 kgRoller material feed with manual adjustable length stop with limit switchblade brushcontrol panelheight adjustment bar with limit switchhydromechanical blade tensioninverterhydraulic vicecoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 61900 €: 1169.91 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 540 mm: 540 mm: 670x540 mm: rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm: 2.2 kW: 4 kW: 0.12 kW: 3100 mm: 2350 mm: 2150 mm: 3800 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 €: 181.81 €: Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 200 mm: 250x150 mm: rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm: 0.7 kW: 1330 mm: 1300 mm: 1880 mm: 350 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentutomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.OPTION:Adjustable vice pressure (R1) EUR 403,--The data for this ad was created with ModulMWS - the software solution of Logo ...
: neu : ca. 10 Wochen ab Auftrags : Italien : 11070 €: 212.54 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 420x200 mm: rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm: 1600 mm: 1400 mm: 1800 mm: 438 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4-6 Monate ab Auftrag : Türkei : 12200 €: 234.24 €: Schwenkrahmen : 3660x27x0,9 mm: 20-100 m/min: 320 mm: 300 mm: 320x300 mm: 640 mm: 0.37 kW: 2 kW: 0.12 kW: 1900 mm: 850 mm: 1300 mm: 770 kgRoller material feed with encoder and NC controlblade brushcontrol panelheight adjustment bar with limit switchhydromechanical blade tensioninverterhydraulic vicecoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Schelling FTM 330 | PlattensägeYear of manuf. : 2005 ____________Description:In General:Year of manufacture:2005Cutting length:3,300 mmPanel thickness:5–180 mmSaw blade diameter:620 mmOutfeed table:3,200 x 1,600 mmSaw feed:0.1–60 m/minFeed speed:20 m/min
A Schüco double miter saw for cutting aluminum and light metal profiles is available. Working length: 6000mm, saw units: 2, max. profile cross section X/Y: 150mm/100mm, min. cutting length: 400mm, speed: 2800rpm, cutting angle range: 45°-90°, saw blade diameter: 400mm. Documentation available. An on site inspection is possible.
A chain-feed multi-rip saw is offered. Cutting width: 230mm, max. passage width: 650mm, max. cutting height: 130mm, saw arbor diameter: 65mm, min. workpiece length: 450mm, saw arbor speed: 3900rpm, working height: 850mm, max. feed speed: 48m/min. Dimensions: approx. 2700mm/1900mm/2000mm, weight: approx. 2500kg. Inspection by prior arrangement is possible.
: gebraucht : 2000 : 6253 : prompt, Zwischenverkauf v : 1900 €: 1 : Schwenkrahmen : 2480 x 0,9 x 27 mm: 45 / 90 m/min: 225 mm: 180 x 245 mm: rund 100 mm, 100 x 100 mm : rund 160 mm, 160 x 160 mm : 935 mm: 1.1 kW: 1500 mm: 700 mm: 1400 mm: 225 kgDownfeed with damper cylinder and manual valveCoolant equipmentVice with fast clamping leverRoller table 2000 mm with manual gauge3 pcs. spare bandsOperating manual with EC conformity declarationOPTIONS:Further roller tables and band saw blades on requestBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:htt ...
