Manufacturer:
(Category: 105)
saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade-Manufacturer: Wagner, saw blade copy blade Ø 1040 x 7 mm-Inside: Ø: 32 mm-Bolt circle: mm-Number of teeth: see photo-Weight: 53 kg
Sawmill with log band saw with flywheel 1000 mm Attachment to clamping carriages with pliers
Nikmann Log Band Saw, Model HBB 550 L Maximum cutting diameter: D 550 mm max. board width 530 mm max. cutting length our standard 6 m Track length 6.9 m Maximum saw blade stroke: 540 mm Minimum saw blade height from track: 20 mm Saw blade dimensions: 3200 x 27 x 0.9/1.0 mm Recommended band saw blade FB for softwood X Cut with every 3rd tooth with stellite Maximum cutting thickness: 220 mm Cutting length: 6 m, expandable in 2.3 m increments Minimum cutting length: 0.9 m Engine power: 4 kW/5.5 hp Flywheel diameter: 400 mm Flywheel width: 25 mm Saw blade dimensions: 3200 x 27?33 x 0.9
Cutting height 160 mm Cutting width 380 mm Table size 400 x 460 mm Table inclination up to 45 Wheel diameter 220 mm Motor 1 HP - 750 watt Weight approx. 45 kg
For logs / logs, the BBS750 machine is a loyal partner. The performance of the sawmill depends on the thickness of the planks and beams. However, the average volume throughput can be estimated at 1-1.5 cbm/h. The Bockbandsäge Bochsäge sawmill is used by forest farmers and other wood processors and is used as an entry-level saw. Technical data: - Weight: approx. 600 kg - Machine dimensions: width approx. 220cm - height approx. 170cm - Total length:600cm (in standard version but also extendable) - Cutting length: 480cm - Main motor power: 5.5kW - Power requirements:
Angle system for panel dividing 4300 mm x 2200 mm Year of manufacture 2000 Ex-works not dismantled (lombardia)
Circular Saw Milling Machine Machine stand can be moved with pallet truck Front-facing operation Front sliding slide lock Bevel cuts with tiltable stop on the carriage Milling spindle D 30 mm Casting table 1470 x 725 mm Table height from the floor 860 mm Aluminium sled 3160 x 275 mm Suction nozzle for milling machine and saw bottom 120 mm Milling fence with D 150 mm nozzle Saw motor 4 kw Milling motor 4 kw Cutting height 110 mm Saw blade side adjustment 160 mm Milling Speeds 2900-4400-6000-8000-10000 3 table rings for slotting tools up to 350 mm Weight approx. 1100 kg Other technical
TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg
: neu : ca. 4 Monate ab Auftragse : Türkei : 46700 €: 891.97 €: Doppelsäulenführung : 8200x41x1,3 mm: 20-100 m/min: 810 mm: 750 mm: 910x750 mm: rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm: 4 kW: 0.12 kW: 4020 mm: 1600 mm: 2450 mm: 3970 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frameuser manual in GERMAN or ENGLISHOPTIONS: Hydraulic vertical clamping Micro cooling unit Laser linerThe data for ...
Offer 25326 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 m - Rectangle 300 x 40 - or 240 x 80 mm - at 45° about 130 m - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 Cutting speeds - Drive 400 V / 1.26 / 2.5 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Feed + discharge roller conveyor with dimension stop 6000 mm
Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm -Total weight: 1190 kg
cutting diameter: 410 mmsaw band length: 5800 x 41 x 1,3 mmtable height: 750 mmcapacity 90 degrees: flat: 700 x 410 mmcapacity 45 degrees: round: 410 mmcapacity 45 degrees: flat: 500 x 410 mmcapacity 45 degrees: round: links 410 mmcapacity 45 degrees: flat: links 430 x 410 mmcapacity 30 degrees: round: 320 capacity 30 degrees: flat: 320 x 410 : 15 - 150 m/minworkpiece weight: max. 250 kg/m kg: 5,5 kW: 3200 kg: 4500 x 2800 x 2000 mm- The ergonomic panel control can be networked and offers various optionsOption packages Teleservice for remote maintenance Setting sawing programs in the AV Import of sawing programs from CAD with DSTV interface and data export- Automatic material feed:- In a compact design for shorter sections or with flexible insertion tongsAvailable in almost all lengths- Exact positioning of the material using servo positioning technology- Pioneering electric saw feed with ...
Metal band saw, band saw machine, vertical band saw-Passage width: 380 mm-Passage height: 230 mm-Table: swiveling-Speeds: 12 pieces min: 45 rpm max: 800 rpm-Dimensions: 1150/715/H1900 mm-Weight: 522 kg
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 38700 €: 739.17 €: Doppelsäulenführung : 8200x41x1,3 mm: 20-100 m/min: 810 mm: 810 mm: 850x810 mm: rund 480 mm, quadrat 480 : 585 mm: 1.5 kW: 4 kW: 0.12 kW: 3900 mm: 1200 mm: 2350 mm: 3080 kg2° inlined saw bandoptical height adjustmentlinear guidescontrol panelsecurity switchpressure adjustmenthydraulic vicechip brushhydromechanical blade tensioningcoolant pumpheavy duty gearbox1,2 m roller tableuser manual in GERMAN or ENGLISHOPTIONS:turn table for mitre cutshydraulic top clamping from aboveroller tables and band saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 23800 €: 456.96 €: Doppelsäulenführung : 5200x41x1,3 mm: 20-100 m/min: 460 mm: 460 mm: 650x460 mm: rund 380 mm, quadrat 380 : 590 mm: 0.55 kW: 4 kW: 0.12 kW: 3100 mm: 1000 mm: 1800 mm: 1520 kgblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverterlinear waymaterial limit shaftheight adjustmentpressure adjustmentcoolant pumpsaw bladesecurity switchgearbox1,2 meter roller tableuser manual in GERMAN or ENGLISHOPTION:turn table for mitre cutshydraulic top clamping from aboveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year: 2018 technically efficient, ready to work – after full service motor power: 2.2 kW disc diameter: 400 mm (cross-cut) machine head can be moved 45° to the right and left head tilt 45° to the left pneumatic profile clamps pressure reducer cooling system
cutting diameter: - mmsaw band length: - mmcutting width: - mmtable - swivable: ja Gradweight of the machine ca.: 200 kgdimensions of the machine ca.: - mwith welding equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 245 x 40 mm 2 cutting speeds by pole-switchable motor: 9 and 18 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm
: neu : ca. 6 Monate ab Auftragse : Türkei : 30900 €: 590.19 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 560 mm: 560 mm: 570x560 mm: 590 mm: 1.1 kW: 4 kW: 0.12 kW: 500 mm: 1050 mm: 2050 mm: 2242 kgNC controldouble column band saw3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninverterlinear wayoptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchgearboxuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale is a Heska ESU 9 vertical band saw, ideal for precise sawing work in metal, wood or plastic processing. The machine is characterized by a large working area, high stability and robust construction. Perfectly suited for workshops, training companies and industrial applications. Technical data: Blade length (max.): 4550 mm Blade length (min.): 4400 mm Total height: approx. 2000 mm Width (machine body): approx. 900 mm Depth (incl. table): approx. 1700 mm Saw table: Table size: approx. 600 × 660 mm Table extension right: +500 mm Dimensions: Length: 900 mm Width: 1700 mm Height: 2000 mm Condition: Used, functional Further technical details on request Delivery / Pick-up: Loading onto trucks possible Transportation can be organized on request
cutting diameter: 225 mmsaw band length: 2450 mmcutting width: 240 mmdimensions of saw-band: 2450 x 27 x 0,9 mmcapacity 90 degrees: flat: 240 x 160 mmcapacity 90 degrees: square: 200 mmcapacity 45 degrees: round: 160 mmcapacity 45 degrees: flat: 155 x 115 mmcapacity 45 degrees: square: 140 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: flat: 90 x 90 mmcapacity 60 degrees: square: 90 mmweight of the machine ca.: 240 kgFeatures:- Manual band saw machine- One-sided miter- Automatic lowering of the saw bow- Cuts from 0° to 60° left- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication
dimensions of saw-band: 2950x27x0,9 mm: 15-100 m/min: 285 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: flat: 280x220 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 140x100 mmcapacity 45 degrees: round: 230/200 mmcapacity 45 degrees: square: 200/170 mmcapacity 45 degrees: flat: 220x200/200x140 mmtotal power requirement: 2,2 kWWeight: 990 kgOverall size: 2500x2230x2050 mmAccessories / equipment:- Discharge roller conveyor with pneumatic stop, 350 mm wide, digital, length 7.000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 330 mmsaw band length: 4900 x 34 x 1,1 mmtable height: 750 mmcapacity 90 degrees: flat: 350 x 330 mm: 15 - 150 m/minworkpiece weight: max. 670 kg/m kg: 3,9 kW: 2600 kg: 1700 x 2400 x 2200 mmSpecial equipment:- Screw chip conveyor- Zero stop- Material database- Clamping pressure regulation- Swiveling control panel- Job menu- Multi-bar clamping device- Cut control- Micro-dosing system- LED work light- Work table on the discharge side- Water spray gun- Coolant level and flow monitoring- Opening on both sides / shortened remnant piece- Material monitoring- Laser light for cutting line display/scoring saws- Vertical rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year: 2008 - technically efficient, ready to work – after full service - disc diameter: 420 mm - installation showing: - double-sided pneumatic clamp - angle-adjustable crank - hydraulic feed brake - pressure reducer
: neu : ca. 10 Wochen ab Auftrags : Italien : 14110 €: 270.91 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 420x200 mm: rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm: 1600 mm: 1600 mm: 1800 mm: 488 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade Ø: 370 mm Cutting Area at 90° round: 120 mm Square: 100 mm Rectangle: 180 x 100 mm at 45° round: 120 mm Square: 100 mm at 60° round: 110 mm Square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Space requirement: 1000 x 1000 x 1800 mm Weight: 390 kg
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 45100 €: 861.41 €: Doppelsäulenführung : 5200x34x1,1 mm: 20-100 m/min: 360 mm: 360 mm: 610x360 mm: rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm: 1.5 kW: 3 kW: 0.12 kW: 2850 mm: 2250 mm: 1870 mm: 2400 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MISCHI KURT
