Manufacturer:
(Category: 105)
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 61900 €: 1169.91 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 540 mm: 540 mm: 670x540 mm: rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm: 2.2 kW: 4 kW: 0.12 kW: 3100 mm: 2350 mm: 2150 mm: 3800 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TECHNICAL SPECIFICATION max. diameter of saw blade: 460 mm cutting capacity round: 146 mm cutting capacity square: 138 mm mitre cutting: no .. oblong: 250 mm .. .. x: 100 mm .. to: 220 mm/minDIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 1950 mm total height: 2000 mm total weight approx.: 2700 kgHigh-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts.With feed conveyor and discharge / vibrating section and extraction system.- max. profile width / height to be processed: 250 / 148 mm- Min. profile width / height to be processed: 10 / 20 mm- Cut-off lengths from 10 mm- Saw blade motor 12/18.5 KW, S6 60%
Cutting diameter 90°: Ø 305 mm Cutting range at 90 degrees: square: 360x305 mm Cutting range at 45 degrees: round: Ø 265 mm Cutting range at 45 degrees: flat: 265x305 mm Cutting range at 60 degrees: round: Ø 175 mm Cutting range at 60 degrees: flat: 175x305 mm Table height: 700 mm Saw blade dimensions : 3830x27x0.9 mm Belt speed: 16-100 m/min Dimensions LxWxH: 2300 x 1450 x 1650 mm Total power requirement: 380 V , 1.1 kW Machine weight approx.: 780 kg Cut area at 90° cow: Ø 305 mm Cut area at 90° weight: 360 x 305 mm Cut area in area at 45° round: Ø 265 mm Cut area in width at 45° angle: 265 x 305 mm Cut area in width at 60° cow: Ø 175 mm Cut area in width at 60° angle: 175 x 305 mm Rubber bands: 3830 x 27 x 0.9 mm Sägebandgeschwindigkeit: 16 - 100 m/min Spaces: 2300 x 1450 x 1650 mm Sägeantrieb: 380 V, 1.1 kW Weight ±: 780 kg Auction-ID: A1-41992-93
Saw blade diameter 350-400 mm, cutting speeds 9-20 m/min, hydraulic flow rate 6 l/min, feed speed 0-1000 mm/min, express return 1800 mm/min Auction-ID: A1-45714-44
Offer 26077 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 1000 mm
Offer 26100 Technical data: - Cutting range 29 - 119 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 300 kg - 2 roller conveyors 1500 mm
Offer 26101 Technical data: - Cutting range 29 - 119 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 300 kg - 2 roller conveyors 1500 mm
Key data: 230 mm
suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece
Speed 3600 1/min Saw blades up to diameter 350 mm Mitre left + right. 45° and bevel cuts up to 45° l. Cutting range: 90° 120mm round, 105mm square, 200x80mm flat 45°L 65mm round, 60mm square, 180x50mm flat 45°R115mm round, 100mm square, 150x80mm flat incl. short roller conveyor
Key data: 530 mm
Automatic machine with mitre Cutting Area 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x520 mm 30° flat 530 x 320 mm Cutting angle 45°-0°-60° Saw motor 3.0 kW Belt speed 20 - 120 m/min, infinitely variable Equipment: - 99 Programs - Machine stand with chip loading tray - Hydraulic cutting pressure regulation - Stepless speed adjustment - Hydraulic guide arm adjustment - Minimum quantity lubrication - Shutdown at the end of the cut and retraction behind Movable jaw - Chip brush running along - Hydraulic mitre adjustment - Hydraulic vise clamping - Hydraulic saw blade clamping - Instruction manual
Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station
Offer 26102 Technical data: - Cutting range 140 - 330 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 400 kg - 2 x roller conveyor 1500 mm
: neu : ca. 10 Wochen ab Auftrags : Italien : 58000 €: 1096.2 €: Schwenkrahmen : 3120 x 27 x 0,9 mm: 15 - 101 m/min: 280 mm: 240 mm: 310 x 240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 5150 mm: 3200 mm: 1950 mm: 5000 x 2200 x 1900 mm: 2150 kgCNC control with 7", touchscreen for the following functions:Feed length, workpiece count, and automatic saw frame rotation for frame adjustmentAutomatic feed 3000 mm / strokeVariable cutting pressureMachine with infinitely variable speedCoolant systemMotorized chip brushChip conveyorAutomatic saw blade breakage monitoringHydraulic vicesRecommended max. diameter of solid material in automatic mode: 150 mmOperating manual in German or EnglishOPTIONS:Hydraulic bundle clamping device, micro-spray device, variable clamping pressure,10", s ...
An old segment cold circular saw Wagner Reutlingen is available. Series: 1, roller conveyor length: 4500mm, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, weight: approx. 3000kg. An on-site inspection is possible.
Saw blade diameter: 400mm, miter range: +/-90°, max. round material cutting capacity: 130mm, max. square material cutting capacity: 120mm, max. flat material cutting capacity: 305mm/20mm, machine dimensions X/Y/Z: approx. 1050mm/900mm/1850mm, weight: approx. 850kg, on-site inspection is possible.
saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmmitter cutting - all-position: +90°/-90° °cutting speed: 10/20 m/minvoltage: 400 Vfeed speeds infinitely variable: 0 - 1000 mm/mintotal power requirement: 3,4 kWweight of the machine ca.: 840 kgdimensions of the machine ca.: 1,10 x 0,9 x 1,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 26087 Technical data: - CNC control PS 210 for material replenishment machine, - Cutting speed, cutting pressure - Separate manual operation of all functions without CNC control - Saw blade dimensions 4150 x 27 x 0.9 mm - Cutting speed infinitely adjustable 15 - 105 m/min - Cutting pressure regulation infinitely variable 0.2 - 2.0 m/min - Cutting area - at 90° around 320 mm - Square flat 400 x 280 mm - at 45° around 200 mm - at 30° Re about 170 mm - Left + right mitre adjustable with digital display - min/max section length of the material replenishment machine - for single stroke 2 / 1005 mm - Total drive 400 V / 3.0 kW - Minimum quantity coolant spraying device pneumatically supported - Hydr. Saw Band Tension + Mot. Saw Blade Brush - 2 pieces of original roller conveyor 2000 mm - Space requirement approx. W ...
Offer 26098 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° to : around 130 mm - Square 120 mm - flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade infinitely variable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydr. Material vise, infinitely adjustable clamping pressure - Hand crank for fine adjustment - Restraint adjustable - Coolant device - Discharge roller conveyor with dimension stop 5000 mm - Feed roller conveyor 4000 mm - Space requirement approx. W 800 x H 1770 x D 1020 mm - Weight approx. 950 kg
1 piece EISELE PSU 450 H metal circular saw Technical data: Saw motor ‐ variable speed by pole switch Gearbox Max. saw blade diameter Ø 450/40 mm, thickness 4 mm (HSS) Clamping cylinder ‐ vertical Long stroke ‐ horizontal Clamping pressure adjustable Operating pressure Mitre cuts Machines ‐ Dimensions W/H/D D=100 x 160 mm D=50 x 8 mm 30 bar. 50 bar. 30°/45°/90°/45°/30° 1000/1860/1330 mm
cutting diameter: 800 mmsaw band length: 9195 mmcutting width: 1,6 mmtotal power requirement: 23 kWweight of the machine ca.: tdimensions of the machine ca.: mcutting range enlargement up to 800 round steelroll conveyorcoolant devicechip conveyorTechnische Daten:Schnittbereich rund / cutting range round 800 mmSchnittbereich vierkant /cutting range square 830x730 mmSchnittgeschwindigkeit stufenlos / cutting speed stepless 12-120 m/min.Sägebandlänge / dimensions of the saw band 9195x67x1,6 mmGesamtantriebsleistung / drive capacity 23 kWGewicht der Maschine ca. / weight 11600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 380 mm
Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display E111 Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation Machine is dismantled on squared timber
: neu : ca. 10 Wochen ab Auftrags : Italien : 8300 €: 160.19 €: Schwenkrahmen : 3010x27x0,9 mm: 35/70 m/min: 260 mm: 240 mm: 330x120 mm: rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm: 1500 mm: 1400 mm: 1850 mm: 345 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2023 : 6242 : prompt, Zwischenverkauf v : Italien : 5400 €: 1 : Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 220 mm: 260x140 mm: rund 160 mm, quadrat 155 : rund 95 mm, quadrat 95 mm : 965 mm: 1200 mm: 1100 mm: 1860 mm: 240 kgdemo machine / mint conditionnet price (price for new machine € 6.730,00)manual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentOPTIONS:Roller tables and band saw blades on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 11100 €: 213.12 €: Schwenkrahmen : 3660x27x0,9 mm: 20-100 m/min: 320 mm: 300 mm: 320x300 mm: 640 mm: 0.37 kW: 2.2 kW: 0.12 kW: 1900 mm: 850 mm: 1300 mm: 770 kgRoller material feed with manual adjustable length stop with limit switchblade brushcontrol panelheight adjustment bar with limit switchhydromechanical blade tensioninverterhydraulic vicecoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 440 mmsaw band length: 5200 x 1,1 x 34 mmcutting width: 610 x 440 mmcutting speed: m/mintotal power requirement: 3,7 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,7 x 1,55 x 1,5 mBand saw horizontal- Coolant system- Emergency stop switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2000 : 6253 : prompt, Zwischenverkauf v : China : 1900 €: 1 : Schwenkrahmen : 2480 x 0,9 x 27 mm: 45 / 90 m/min: 225 mm: 180 x 245 mm: rund 100 mm, 100 x 100 mm : rund 160 mm, 160 x 160 mm : 935 mm: 1.1 kW: 1500 mm: 700 mm: 1400 mm: 225 kgDownfeed with damper cylinder and manual valveCoolant equipmentVice with fast clamping leverRoller table 2000 mm with manual gauge3 pcs. spare bandsOperating manual with EC conformity declarationOPTIONS:Further roller tables and band saw blades on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible.
Qty. 1 Second-hand automatic saw socket production line Mfc.: ADIGE SYS Type: BC 80 Built: 2022 The BC80 is a high-productivity vertical rotary transfer machine that allows you to cut and chamfer tubes and solid bars. Its main features include: fully automatic operation; separate management of scrap and chips; protection for fragile tubes; centralized adjustment for diameter changes; and a simple and intuitive graphical interface. The BC80 is the highest-performing and most efficient solution on the market for the continuous, 24/7 production of bushings up to 80 mm in diameter and from 10 to 350 mm in length. The BC80 can produce up to 2200 parts per hour, cut to length, chamfered, and inspected from a tube or solid bar. Round tube cutting capacity: min. 10 mm (0.4") - max 80 mm (3.15") Bar cutting capacity: 60 mm (2.4") Workpiece length: min. 10 mm - max. 350 mm Loader l ...
400 € 
