Hydr. Metal circular machine Technical data: -Saw flaked diameter up to 350 mm -Cut range at 90 ° -around 110 mm -four-edged 100 mm -rectangle 180 x 40 mm -or 160 x 85 mm -at 45 ° -around 110 mm -four-edged 100 mm -Walking adjustable Li + Re ever 0-90 ° -2 cutting speeds 16 + 32 m/min -Drive 400 V/1.2/1.8 kW -Feed speed of the saw blade hydr. infinitely controllable -Coolant equipment -Supplusion â roller duct 3000 mm -Rebuff â roller duct with measure 3000 mm -Space requirements approx. B 650 x H 1650 x T 900 mm -Weight approx. 750 kg
offer 22739 Specifications: - Saw blade feed by hand lever - Workpiece clamping in the machine vice - Saw blade diameter up to 370 mm - Cutting speeds N 15 - 30 rpm - Miter adjustable Right up to 45°, Left up to 45 - 60° - Cutting range at 90° approx. 120 mm - Rectangle 180 x 100 mm - Square 110 x 110 mm - mitre at 45° approx. 120 mm - Rectangle 120 x 100 mm - Coolant device - Stop 1000 mm - Drive 400 V / 1.5 / 2.2 kW - Space requirement approx. W 600 x H 2050 x D 1100 mm - Weight approx. 380 kg
Specifications: - Saw blade diameter up to 450 mm - Cutting range at 90° around 150 mm - square 140 mm - rectangle 320 x 90 mm - or 250 x 95 mm - at 45° around 150 mm - square 120 mm - rectangle 220 x 90 mm - Miter adjustable left + right 0° - 90 ° - 0 ° - Saw blade speeds 11 + 22 rpm - Drive 400 V / 1.6 / 2.5 kW - Feed speed of the saw blade hydr. infinitely variable - 2 pcs horizontal metal clamps - Coolant device - Space requirement approx. W 1000 x H 1850 x D 1200 mm - Weight approx. 1100 kg
offer 23005 Specifications: - Saw blade diameter up to 350 mm - Saw blade feed infinitely variable hydro - pneumatic - largest opening width of the pneumatic vice 205 mm - Cutting range - with saw blade diameter 350 mm - at 90° approx. 120 mm - square 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - miter adjustable - left up to 45° - right up to 45° - 30° - 2 saw blade speeds 34 + 68 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Microspray - coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg
saw blade diameter: 450 mmstroke: mmtotal power requirement: kWdimensions of the machine ca.: mcutting diameter: mmweight of the machine ca.: 2 tcutting range round 220mmcutting range square 470mm x 30mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade diameter: 400 mm Connection: 400 V Equipment: - 2 sawing units - Pneumatic vice
offer 22590 Specifications: - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - largest opening width of the vice 155 mm - Cutting range with saw blade diameter 300 mm - at 90° about 85 mm - flat 150 x 70 mm - at 45° about 85 mm - flat 95 x 85 mm - miter adjustable - Li up to 30° - Re up to 45° - Saw blade speeds 30 + 60 1/min - Drive 400 V / 1.35 / 1.8 kW - Coolant device - Space requirement approx. W 600 x H 1700 x D 800 mm - Weight approx. 250 kg
Specifications: - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - largest opening width of the vice 145 mm - Cutting range with saw blade diameter 300 mm - at 90° about 95 mm Flat 125 x 90 mm - at 45° about 95 mm flat 95 x 85 mm - miter adjustable left to 30° + right to 45° - Saw blade speeds 40 + 80 1/min - Drive 400 V / 1.6 / 2.1 kW - Coolant device - Discharge roller gear 3000 mm - Space requirement approx. W 600 x H 1700 x D 800 mm - Weight approx. 250 kg
Technical data: -Saw blade diameter 470 mm -Adjustable miter left + right up to 30 ° -Digital angle display -Cutting capacity 90 ° round 140 mm square 110 mm rectangle 290 x 70 mm round 45 ° 140 mm square 110 mm rectangle 190 x 70 mm at 30 ° round 130 mm -Sägeblattdurchm cutting speeds. 400 mm approx. 22.5 + 45 m / min -Sägeblattdurchm cutting speeds. 470 mm approx. 25 + 50 m / min -Hydr. Horizontal + vertical material clamp -Drive 400 V / 4 kW -Feeding speed of the saw blade, hydr. infinitely variable -Microsprüh - coolant system - space requirement approx. B H 1200 x 1950 x D 1700 mm -Weight 850 kg
Panel saw for iron plates Saw blade dia. 350mm, stroke: approx. 500mm, miter and swivel possible Electrified
CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...
MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET
