Manufacturer:
(Category: 106)
Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Punch holder for square notching punch for profile steel shears and flat steel shears -Hole spacing: 177/60 mm / Ø15 mm -Dimensions: see photos -Dimensions: 205/115/105 mm -Weight: 10.3 kg
The DORST DK 15 Sizing and Powder Compaction Press is a used but reliable machine designed for efficient powder compaction tasks. It boasts a maximum pressing force of 150 Kn and a withdrawal force of up to 50 Kn, ensuring robust performance for various industrial applications. The press is capable of handling a maximum filling height of 40 mm and a pressing travel of up to 30 mm, while its upper punch stroke is 60 mm. This model operates with a range of 10 to 70 strokes per minute, allowing for adaptable production speeds. The machine features a die return force of 10 Kn and a supporting force in the pressing position of up to 40 Kn. Its upper punch can be adjusted within a travel limit of 15 mm, providing flexibility in operations. For pneumatic operations, the upper punch preload is up to 10 mm, and the machine consumes approximately 60 liters of compressed air per minute. The DORST D ...
The used DORST DK 100 is a robust sizing and powder compaction press designed for high-performance industrial applications. Capable of a maximum pressing force of 1000 Kn and a withdrawal force of 500 Kn, this machine provides powerful and reliable operation. It accommodates a filling height of up to 110 mm with a pressing travel of 50 mm, ensuring versatility for various compaction tasks. The upper punch stroke is 140 mm, with adjustable travel up to 75 mm, allowing for precise control over pressing operations. This model offers between 5 and 22 strokes per minute, giving you flexibility in production rates. The die return force is 100 Kn, while the supporting force in the pressing position reaches 300 Kn. Pneumatic operations are supported with an upper punch preload of up to 30 mm and compressed air consumption of approximately 80 liters per minute. It requires a total connected load ...
The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...
Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, counter blade only, without notching unit -Dimensions: see photos -Dimensions: 310/170/H145 mm -Weight: 24.1 kg
Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder -Stamping tool: die holder -Hole: Ø 45 mm -Bore: Ø 33 mm -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg
Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Withdrawal device: for square notching dies -Dimensions: see photos -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm -Weight: 2.4 kg/pc.
Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Shearing tool: Knife plate punch die for profile steel, 6 pieces Sizes: see photos -Submission/Price: complete -Dimensions each: 188/188/H40 mm -Weight: 10 kg/pc.
Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Square notching die for profile steel shears and flat steel shears -Width: 50 mm -Dimensions: see photos -Dimensions: 175/60/H125 mm -Weight: 6.6 kg
Stop, depth stop, length stop for press brake, bending machine, guillotine shear..., electric stop for profile steel shear, contact length stop -Manufacturer: Peddinghaus, electric stop contact length stop for profile steel shears flat steel shears -Stop head, tiltable, swiveling -Hole: Ø 50 mm -Transport dimensions: 440/270/H155 mm -Weight: 6.4 kg
Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press, quick-change punch holder -Stamp holder: Stamp holder -Hole: Ø 30 mm -Hole spacing: 94x63 mm / Ø13 mm, see photos -Dimensions: 120/90/H135 mm -Weight: 4.2 kg
Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: Intermediate block -Bore: Diameter 65 mm -Dimensions: see photos -Dimensions: 370/250/H125 mm -Weight: 46.7 kg
Pressure total: 2000 ton Stroke: 1500 mm Daylight: 2000 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 100 - 600 ton Die cushion stroke: 400 mm Die cushion pad area: 4000 x 1800 mm Cushion pressure in ram: 50 - 300 ton Approach speed: 200 mm / sec Working speed: 20 - 30 mm / sec Return speed: 200 mm / sec Oil volume: 5000 l Required power: 2 x 250 kW Weight of machine approx.: 360 ton
Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies -Hole: Ø27/33 x 257 mm -Dimensions: 360/105/H135 mm -Weight: 5.0 kg
Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies -Hole: Ø30 x 258 mm -Dimensions: 310/100/H125 mm -Weight: 4.6 kg
A complete 8-stage transfer press line with a Weingarten double-column transfer press is available. 1) Mechanical double-column transfer press Weingarten S.3100.08.70.1, year of manufacture: 1969, tool stations: 9, forming stages: 8, total press force: 3100t, press force blanking slide/drawing slide: 300t/2800t, strokes: 28/min, blanking slide stroke: 200mm, drawing slide stroke: 500mm, max. drawing depth: 120mm, drawing slide ejector stroke: 100mm, blank holder stroke: 50mm, drawing cushion force: 25t, transfer pitch: 700mm, max. blank dimensions X/Y: 450mm/450mm, max. blank diameter: 540mm, table dimensions X/Y: 1200mm/5600mm, main motor power: 300kW, machine dimensions X/Y/Z: approx. 10500mm/7500mm/9700mm, weight (according to documentation): approx. 524t, stroke counter reading (September 2024): approx. 25 million. 2) Blanking and cutting press Georg Maschinentechnik PKD 630, year of ...
- Adjustable sheet arms front side- Parking stattion sheet arms left side- WILA Crowning- Under power
A hydraulic two-column press brake Atlantik is available. Press force: 135t, bending length: 3000mm, throat depth: 250mm, ram stroke: 120mm, overrun time: 84ms, safety distance: 134mm, machine dimensions X/Y/Z: approx. 3500mm/1700mm/2300mm, weight: approx. 6800kg. An on-site inspection is possible.
Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible.
Stage Press / Eccentric Press Erfurt Pressen Erfurt 3, Maintenance No. 156, press force 320 t, year of construction approx. 1980, with 15 press punches, electronic transfer line, conversion by PBK, system consisting of double unwinding reel PBK, straightener PBK, feed, blank cut (Machine is partially dismantled after defect, without tools)
Key data: 315 t, 310 mm, 250 mm
Condition used Press capacity 315 t Stroke 250 mm Daylight 310 mm Table size (left to right) 320 mm Table size (front to back) 385 mm Table height 1250 mm Speed at max. press force 7.5 mm/sec Pressure speed at f max. 0.3 mm/sec Return speed 24 mm/sec Oil quantity 390 l Driving power 380 V/ 50 Hz/ 2.2 kW Dimensions 1950 x 800 x 2000 mm Height of machine above floor 2000 mm Total weight 2.4 t Mode of operation oil hydraulic Calibrating presses Description Contact the seller for more information Interested in this machine?
PRESS FORCES total force (nominal): 1000 toPRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1300 mmSLIDE stroke: 500 mm
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 toPRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mmSLIDE stroke: 600 mmSLIDE (HYDR. PRESS) return force: 38 toDIE CUSHION (TABLE CUSHION) stroke: 200 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 46131
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 toPRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mmSLIDE stroke: 600 mmSLIDE (HYDR. PRESS) return force: 38 toDIE CUSHION (TABLE CUSHION) stroke: 200 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 32510
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 toPRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mmSLIDE stroke: 600 mmSLIDE (HYDR. PRESS) return force: 38 toSLIDE EJECTOR / CUSHION stroke: 200 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 47037
CONTROLS PLC SIEMENS SIMATIC PANEL PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 400 toPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1300 mmSLIDE stroke: 700 mmDIE CUSHION (TABLE CUSHION) stroke: 200 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1100 mmMachine hours: 14060
CONTROLS conventional PRESS FORCES total force (nominal): 160 toPRESS TABLE table surface (left-right): 1000 mm table surface (front-back): 850 mmSLIDE stroke: 705 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1205 mmMachine hours: 78571
CONTROLS PLC SIEMENS S7 SLIDE total force (nominal): 630 toTOOL DIMENSIONS lower table (left-right): 900 mm lower table (front-back): 900 mm shut height max.: 900 mm
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: servohydraulic frame design: H-frame, tie rod quick die change system: yes feedstock transport direction: left to right SLIDE total force (nominal): 1100 to stroke: 130 mm stroke rate (max.): 60 /minCOUNTER RAM nominal force: 330 to stroke: 40 mmV-RING nominal force: 500 to stroke: 40 mmTOOL DIMENSIONS lower table (left-right): 960 mm lower table (front-back): 960 mm upper table (left-right): 960 mm upper table (front-back): 960 mm shut height max.: 470 mmOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 16 mm coil weight max.: 8 to feedstock transport direction: left to right COIL CHAIR coil weight max.: 8 to stroke: 700 mmDECOILER coil weight max.: 8 to max. diameter of coil: 1800 mm mandrel expansion range from: 47 ...
