Manufacturer:
(Category: 105)
cutting diameter: Ø 340 / 340290 mmband length: 600 52 2,5 mmcutting lenght max.: x 600 mmtotal power requirement: 6 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,52,51,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 300 mmthroat: 450 mmtable height: 480 mmsaw band length: 3350 mmwidth of saw-band: 10 mmtotal power requirement: 2,2 kWweight of the machine ca.: 520 Kgdimensions of the machine ca.: 1,00 x 0,70 x 1,85 mSaw for body parts made of sheet metal, plastic etcgood accessibility of the saw blade, guided freehand.Cutting speed infinitely variable up to 1000 m/minTape welding device IDEAL BS00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 x 240 mmcapacity 90 degrees: flat: 165 x 210 mm: 195 mm: 185 x 185 mm: 130 x 190 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 85 x 85 mmcapacity 60 degrees: flat: 85 x 120 mmMotor output: 1,2 kW: 170 mm: 145 x 145 mm: 60 x 195 mmcutting speed: 36 + 72 m/mindimensions of saw-band: 2725 x 27 x 0,9 mm: 315 mmwork height max.: 900 mmWeight: 330 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 225 mmcapacity 90 degrees: flat: 245 x 150 mmcapacity 90 degrees: square: 200 x 200 mmcapacity 45 degrees: flat: 160 x 140 mmcapacity 45 degrees: round: 160 mmcapacity 45 degrees: square: 140 x 140 mmcapacity 60 degrees: flat: 110 x 80 mmcapacity 60 degrees: square: 90 x 90 mmcapacity 60 degrees: round: 90 mmvice: 245 mmturning speed range:: 46/92 m/minsaw band length: 2450 x 27 x 0,9 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 240 kgdimensions of the machine ca.: 1.530 x 900 x 1.720 mmEquipment:- compact / robust manual band saw- with one-sided miter device up to 60° left- hydraulic lowering of the saw bow stepless feed adjustment limit switch at the end of the cut- 2x saw band speeds- saw band guide made of hard metal plates- manual vice with quick lock- machine base with- coolant device- manual saw band tension (star grip at the front)- 1x angle ...
cutting diameter: 305 mmsaw band length: 3375 mmcutting width: 350 mmdimensions of saw-band: 3375 x 27 x 0,9 mm: 305 mm: 260 mm: 350 x 200 mm: 250 mm: 230 mm: 230 x 200 mm: 175 mm: 155 mm: 170 x 100 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 1,8 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: - mmthroat: 1000 mmworkpiece height: 350 mmtotal power requirement: 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2 x 1 x 2 mNo. 4428Horizontal band saw SAMUR S-1000 VCutting height 350 mmCutting speed 20-800 mmBlade length : 4,550 mm.Blade width : 4 to 15 mm.Infinitely variable cutting speed : 23-711 m / minElektromot r380 VTable dimensions: 610 x 610 mm Table extension leftWelding deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 2910 x 27 x 0,9 mmcapacity 90 degrees: round: 240 mmcapacity 90 degrees: flat: 310 x 240 mm: 200 mm: 200 x 200 mm: 200 mm: 200 x 200 mm: 140 mm: 200 x 140 mmrest piece length: 60 mmwork height max.: 900 mmdimensions: 800 x 1750 x 1500 mmweight of the machine ca.: 470 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 36/72 m/min: 285 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 230 mmcapacity 90 degrees: flat: 280x200 mmcapacity 45 degrees: round: 190 mmcapacity 45 degrees: square: 180 mmcapacity 45 degrees: flat: 180x180 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 110 mmcapacity 60 degrees: flat: 110x110 mmdimensions of saw-band: 2950 x 27 x 0,9 mmoutput: 1,5 / 1,8 kWWeight: 435 kgdimensions: 1700x1000x1840 mmSemi-automatic function:- Vice closes and engine starts- Saw head lowers for the cut- Engine shuts off- Saw head lifts - vise opensThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 x Ø 32.0 mmcapacity 90 degrees: flat: 175 x 75 mmcapacity 90 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 100 x 80 mmcapacity 45 degrees: square: 85 x 85 mmturning speeds: 3000 U/mintotal power requirement: 1.5 kWweight of the machine ca.: 180 kgdimensions of the machine ca.: 870 x 710 x 1435 mmEquipment :- semi-automatic circular saw for cutting PVC and aluminum profiles- two-hand safety operation- Miter adjustment : left 0 / - 45 / - 60 right 0 / 45 / 90- Large protective hood, covers entire working area- Saw blade- 2x vertical pneumatic clamping cylinders- Adjustable blade and cutting feed- Air dust gunWork sequence1) Setting the cutting angle2) Inserting the material3) Adjusting the stroke speed4) Bring the clamping cylinder up to 20 mm of material5) Clamp the material6) The machine is ready for operation by pressing the start button.7) Press and h ...
: neu : ca. 4 Monate ab Auftragse : Türkei : 53900 €: 1018.71 €: Doppelsäulenführung : 7000x41x1,3 mm: 15 - 120 m/min: 560 mm: 540 mm: 810 x 530 mm: rund 520 mm, quadrat 520 : rund 520 mm, quadrat 520 : rund 330 mm, quadrat 330 : 875 mm: 1.1 kW: 4 kW: 0.12 kW: 3850 mm: 1700 mm: 2450 mm: 3400 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISH(roller table see photo - optional avai ...
capacity 90 degrees: round: 350 mmcapacity 90 degrees: square: 350 mmdimensions of saw-band: 4640x34,1,1 mm: 355 mmsawband speed: 15-115 m/minweight of the machine ca.: 2800 kgdimensions of the machine ca.: 3050x2190x2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 16700 €: 320.64 €: Schwenkrahmen : 4800x34x1,1 mm: 15 - 120 m/min: 360 mm: 360 mm: 510x360 mm: rund 360 mm, quadrat 360 : rund 250 mm, quadrat 220 : rund 280 mm, quadrat 260 : 860 mm: 0.37 kW: 3 kW: 0.12 kW: 2650 mm: 1210 mm: 1870 mm: 1450 kgHydraulic viceInverter for contious variable band speedContinuously adjustable saw arm lowering speedHydromechanical blade tension can be read via pressure gaugeControl panelChip brushCoolant equipmentOperating instructions in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Türkei : 32000 €: 611.2 €: Doppelsäulenführung : 5000 x 34 x 1,1 mm mm: 20 - 120 m/min: 330 mm: 330 mm: 350 x 330 mm: 845 mm: 1.1 kW: 3 kW: 0.12 kW: 2815 mm: 1935 mm: 1855 mm: 2560 kgServo feed with 700 mm strokeCutting length up to 9,999 mm (multiple feeds)Omron touchscreen, 50 different cutting lengths and 30 programs can be savedLinear guide41 mm saw bladeControl panelHydraulic viceHydromechanical blade tensionHeavy duty gearboxCoolant deviceSensitive pressureInverter for stepless blade speedChip brushOptical height adjustmentChip conveyorOperating instructions in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 61900 €: 1169.91 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 540 mm: 540 mm: 670x540 mm: rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm: 2.2 kW: 4 kW: 0.12 kW: 3100 mm: 2350 mm: 2150 mm: 3800 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 800 x 800 x 1500 mmcutting diameter: 200 mmstroke: 150 mmdimensions of the machine ca.: mtotal power requirement: 3 kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 3650x27x0,9 mmspeed: 15/100 m/mincapacity 90 degrees: round: 280 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270x200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mmtotal power requirement: 2,2 kWvice: 340 mmweight: 1240 kgdimensions: 2020x2040x1740 mmElectro-hydraulic fully automatic band saw with additional, semi-automaticFunction, for cuts from 0 ° to 60 ° left.Compact machine with the new Windows CE based MEP-50 controllerand 7 touch-screen display for managing all machine parameters.Easy operation and control of all cutting parameters in real time.Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings,Single stroke 600 mm - repeatable to ...
saw blade diameter: 450 x 30 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 125 x 125 mmcapacity 90 degrees: flat: 190x100 / 230x50 mmcapacity 45 degrees: round: 110 mmcapacity 45 degrees: square: 95 x 95 mmcapacity 45 degrees: flat: 130 x 45 mmturning speeds: 2800 U/minmitre joint cuts -/+ degrees: + 45 / - 45 total power requirement: 2.2 kWweight of the machine ca.: 245 kgrange L-W-H: 1600 x 750 x 1000 mmFeatures:- Semi-automatic high-performance circular saw (underfloor) For cuts from 45° right to 45° left In aluminum and light metal alloys With rising saw blade- Manually opening safety guard (optionally with pneumatic opening)- Hydro-pneumatic saw blade feed (via two-hand operation)- Heavy-duty cast iron construction ensures vibration-free. operation and maximum precision- Large bearing-mounted rotary table with internal indexing at 0/45° Ensures quick adjustment ...
new
: neu : ca. 4 Monate ab Auftragse : Türkei : 50900 €: 962.01 €: Doppelsäulenführung : 5750 x 41 x 1,3 mm: 20 - 120 m/min: 420 mm: 420 mm: 420 x 420 mm: 805 mm: 1.1 kW: 5.5 kW: 1 kW: 0.12 kW: 2860 mm: 1980 mm: 2100 mm: 3700 kgServo feed with 700 mm strokeCutting length up to 9,999 mm (multiple feeds)Omron touchscreen, 50 different cutting lengths and 30 programs can be savedLinear guide41 mm saw bladeControl panelHydraulic viceHydromechanical blade tensionHeavy duty gearboxCoolant deviceSensitive pressureInverter for stepless blade speedChip brushOptical height adjustmentChip conveyorOperating instructions in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 370x32x3 mm: 15-150 U/minvice: 190 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 180x100 mm: 115 mm: 90 mm: 90x90 mm: 115 mm: 100 mm: 120x100 mm: 115 mm: 100 mm: 120x100 mmtotal power requirement: 5,5 kWweight: 615 kgOverall size: 1400x1400x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 36/72 m/mincapacity 90 degrees: round: 300 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mmcapacity 45 degrees: round: 260/200 mmcapacity 45 degrees: square: 250/180 mmcapacity 45 degrees: flat: 270x200/200x160 mmdimensions of saw-band: 3650x27x0,9 mmtotal power requirement: 1,5/1,8 kWOverall size: 2130x1400x1950 mmWeight: 670 kgSemi-automatic function:- Vice closes and engine starts- Saw head lowers for the cut- Engine shuts off- Saw head lifts, vice opensSemiautomatic dynamic system:Manual lowering of the saw blade to the desired position and cycle startover the hand switch. Upper position is saved automatically.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 6254 : prompt, Zwischenverkauf v : Italien : 15040 €: 288.77 €: 1 : Doppelsäulenführung : 3270x27x0,9 mm: 40/80 m/min: 300 mm: 300 mm: 350x260 mm: rund 210 mm, quadrat 210 : rund 110 mm, quadrat 110 : 830 mm: 1.5 kW: 1500 mm: 1600 mm: 1900 mm: 590 kghydraulicvice INCL. ADJUSTABLE CLAMPING PRESSUREsaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.Manufacturer warranty until 31.12.2026OPTIONS:Roller tables and ...
Offered for sale is a fully automatic KASTO vertical bandsaw. Round cutting capacity: 10mm-260mm, max. square cutting capacity X/Y: 260mm/260mm, min./max. cut-off length: 5mm/600mm, feed length: 600mm, min. remnant length: 10mm, max. cutting speed: 125m/min, saw blade dimensions X/Y/Z: 4115mm/41mm/1.3mm, control: KASTO minipos 807, weight: approx. 2200kg. Inspection by appointment is possible.
A Tmj mitre-cutting band saw is offered. Cutting capacity at 90° round: 500mm, cutting capacity at 90° square X/Y: 500mm/500mm, cutting capacity at 45° round: 370mm, cutting capacity at 45° rectangular X/Y: 500mm/370mm, cutting capacity at 60° round: 250mm, cutting capacity at 60° rectangular X/Y: 500mm/250mm, mitre range: 90°-60°, saw blade dimensions X/Y/Z: 5620mm/41mm/1.3mm, max. cutting speed: approx. 100m/min, max. length stop: 1000mm. Dimensions X/Y/Z: approx. 2800mm/1260mm/2300mm, weight: approx. 1550kg. Inspection possible by prior arrangement.
Offer 18184 Technical data: - Saw blade diameter up to approx. 400 mm - Saw blade speed 2800 rpm - Cutting range approx. - at 90° around 140 mm - or flat 170 x 140 mm - Mitre adjustable left + right 45 - 90 - 30 ° - Pneum. Saw blade feed - Pneum. Quick-release vise - Pneumatic connection - Original machine base - Feed roller conveyor 3000 mm - Discharge roller conveyor with dimension stop 6000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 650 x H 1550 x D 1000 mm - Weight machine approx. 150 kg
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 €: 569.18 €: Doppelsäulenführung : 5400x41x1,3 mm: 20-100 m/min: 450 mm: 425 mm: 695 x 425 mm: rund 430 mm, quadrat 425 : rund 320 mm, quadrat 290 : 690 mm: 0.55 kW: 4 kW: 0.12 kW: 3090 mm: 1200 mm: 1940 mm: 1630 kgdouble linear guideshydraulic-mechanical bandtensionsaw bandbrushinfinitely variable cutting speedsensitive cut regulationbi-metal saw band 41coolant devicethermal overload protectionheavy duty gearoptical height adjustment3 ° inclined bandhydraulic clamping of the viceuser manual in GERMAN or ENGLISHOPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 11100 €: 213.12 €: Schwenkrahmen : 3660x27x0,9 mm: 20-100 m/min: 320 mm: 300 mm: 320x300 mm: 640 mm: 0.37 kW: 2.2 kW: 0.12 kW: 1900 mm: 850 mm: 1300 mm: 770 kgRoller material feed with manual adjustable length stop with limit switchblade brushcontrol panelheight adjustment bar with limit switchhydromechanical blade tensioninverterhydraulic vicecoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Semi-automatic band sawing machine Saw blade size: 2910 x 27 x 0.9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Offer 25416 Technical data: - Cutting range at 90° around 260 mm - flat 410 x 200 mm - Mitre adjustable left + right 90 to 30 ° - Schnittb. at 45° Re + Li round 220 mm - flat 230 x 300 mm - Material support height approx. 620 mm - Saw blade dimensions 3660 x 27 x 0.9 mm - Cutting speed 17 - 106 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise - Saw blade cleaning brush - Micro spray coolant device - Total drive power 400 V / 1.9 kW - Roller conveyor 3300 mm - Space requirement with base frame W 5200 x H 1600 x D 2000 mm - Weight with base 1900 kg
Offer 24186 Technical data: - Manual saw blade feed - Workpiece covering in the machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds 40 - 80 m/min - Cutting range at 90° around 110 mm - Rectangle 82 x 160 mm - Square 82 x 82 mm - mitred at 45° about 110 mm - Rectangle 80 x 120 mm - Square 82 x 82 mm - Drive 400 V / 1.4 / 1.9 kW - Coolant device - Space requirement approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg
Offer 24212 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - Left up to 45° - Right up to 30° - Saw blade speeds 34 + 68 1/min - Drive 400 V / 2 / 2.6 kW - Coolant device - Roller conveyor feeder 2000 mm - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg
