Manufacturer:
(Category: 105)
metal band saw blade, band saw blade, metal saw band -unused original packaging -Number: 10x sheets available -Price per piece -Toothing: 5 -Dimensions: 3660 x 26 x 1.1mm -Weight: 0.7kg/pcs
cold circular saw, metal circular saw, miter saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw, metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 3900 mm -max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg
Metal band saw blade, band saw blade -unused: original packaging -Number: 6x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 4400 x 34 x 1.1 mm
Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: DoAll, Horizontal band saw, Automatic band saw type C-916A -Cutting dimensions (flat): approx. 410 x 230 mm -Cutting data round: approx. 230 mm -Cutting data square: approx. 230 mm -Saw blade speed: continuously adjustable, 15 - 120 m/min -Engine power: 3 kW -Saw blade: approx. 4014 mm -Coolant system: present -Dimensions: 2080/1400/H1390 mm -Weight: 670 kg
Stop, depth stop, length stop for miter saw, pull saw... -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg
Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand-Roller stand: Roller stand for hacksaw, band saw, cold circular saw-Roll: Ø 65 x 240 mm-Dimensions: 325/65/H520 mm-Weight: 8.7 kg
Reciprocating saw, dovetail saw, tiger saw, saber saw -Nominal power input: 700 W -in the suitcase -Dimensions: 570/135/H230 mm -Weight: 10 kg
Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg
Table saw, aluminum profile saw-2x saw: Wegoma TS 250-Fixed cutting distance: approx. 450 mm-Saws: individually or simultaneously controllable-with: foot switch-Saw blade: Ø 250 mm-Voltage: 220/380 V-Saw motor: 0.75 kW-Dimensions: 850/790/H1660 mm-Weight: 234 kg
Metal band saw blade, band saw blade -unused original packaging -Number: 5x sheets available -Price: per piece -Toothing: 5/8 ZpZ W -Dimensions: 2950 x 27 x 0.9 mm -Weight: 0.6 kg
Metal band saw blade, band saw blade -unused -Number: 7x sheets available -Price: per piece -Toothing: 6/8 -Dimensions: 4570 x 41 x 1.7 mm
Saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 865 x 6 mm -Inside: Ø: 80 mm -Bolt circle: Ø 160 x 30 mm -Number of teeth: see photo -Weight: 6 kg
Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade-Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm-Inside: Ø 32 mm-Number of teeth: 132 teeth-Number: 19x saw blades available-Price: per piece-Weight: 10,1 kg/piece
cutting diameter: 260 mmband length: 480 mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mwith contents see photosThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 400 mmband length: 680 mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mwith contents see photosThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Smallest diameter 10 mm- Shortes length singel stroke 15 mm- Shortes length automatic mode 100 mm- Working height 700 mm- Max. stroke 9999 mm- Control panel - Memory 99 program with - Bundel clamp device - New price 45.000
saw blade diameter: 800 x 800 x 1500 mmcutting diameter: 200 mmstroke: 150 mmdimensions of the machine ca.: mtotal power requirement: 3 kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9032 Type: Mec3000 Producer: Simec Created: 2019 Parameters: Switch-on hours: 9365 h Input length of the material: 6000–7000 mm. Parting diameter: 12–100 mm. Output length: 50–2000 mm.
cutting diameter: 220 mmsaw band length: - mmcutting width: - mmtotal power requirement: 0,7 kWweight of the machine ca.: 0,240 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2 Column Heavy Duty Band Saw Machine BERG & SCHMID SBS 300 VA-1/CNC Year of Make: 2019 Cutting diameter round: 300 mm Square cutting diameter: 300 mm Cutting diameter flat: 300 mm x 260 mm Belt speed: 20 – 100 m/min Modern SNC 20 control system Frequency-controlled saw drive Control buttons with pictograms Powered chip brush Belt Tension Hydraulic Clamping Pressure Regulation Work light Chip conveyor Taxiway 2 m
Cutting range round material: 220mm, cutting range flat material: 350mm/220mm, cutting range rectangular material: 220mm/220mm, saw band dimensions X/Y/Z: 3720mm/27mm/1mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 2400mm/1900mm/1500mm, weight: approx. 1350kg, operating hours: approx. 1450h. The drive cylinder must be sealed. Documentation available. An on-site inspection is possible.
cutting speed: 15 - 125 m/mincross cutting section: 260 mm²band length: 4.115 x 41 x 1,1 mmcutting width: 260 x 260 mmBand Saw | KASTO - SSB 260 VAThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SSB260VA | SSB-260VA | SSB260 VA | SSB 260VAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting speed: 15 - 125 m/mincross cutting section: 260 mmband length: 4.115 x 41 x 1,1 mmcutting width: 260 x 260 mmBand Saw | KASTO - SSB 260 VAThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SSB260VA | SSB-260VA | SSB260 VA | SSB 260VAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 3650x27x0,9 mmspeed: 15/100 m/mincapacity 90 degrees: round: 280 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270x200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mmtotal power requirement: 2,2 kWweight: 1240 kgvice: 340 mmdimensions: 2020x2040x1740 mmControl: Electro-hydraulic fully automatic band saw with additional, semi-automaticFunction, for cuts from 0 ° to 60 ° left.Compact machine with the new Windows CE based MEP-50 controllerand 7 touch-screen display for managing all machine parameters.Easy operation and control of all cutting parameters in real time.Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings,Single stroke 600 mm - rep ...
A metal band saw is sold. Suitable for someone who has little space available. Dismantling and removal by buyers Pallet truck and a 1.6t forklift on site. Price is 2500 Euro net plus VAT Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Item location 90766 Fürth All information without guarantee
cutting diameter: 335 mmsaw band length: 4400 x 34 x 1.1 mmcapacity 90 degrees: flat: 500 x 335 mmcapacity 45 degrees: round: 305 mmcapacity 45 degrees: flat: 305 x 335 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 335 mmclamping range: 0 - 500 mmwork height max.: 750 mmcoolant capacity: 100 lengine output: 3.0 kWweight: 1320 kgrange L-W-H: 1450 x 2350 x 1950 mm in a well-kept condition current new price machine approx. 35.000 euros special price on requestEquipment:- robust electro-hydraulic mitre bandsaw semi-automatic (INDUSTRY) Particularly suitable for universal use in a variety of applications. cross-sections, materials and frequently changing miter cuts Semi-automatic sawing sequence with workpiece clamping-sawing-raising- Central machine operation- stepless manual miter adjustment miter adjustment 45°li - 90° - 45°re - 30°re Digital actual angle ...
used
Cutting area round/square: 190/190 x 190 mm Cutting area in mitre 45° round/rectangle: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm 1 Lifting speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Space requirement: 1200 x 600 x 980 mm
saw blade diameter: 350 x Ø 32.0 mmcapacity 90 degrees: flat: 175 x 75 mmcapacity 90 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 100 x 80 mmcapacity 45 degrees: square: 85 x 85 mmturning speeds: 3000 U/mintotal power requirement: 1.5 kWweight of the machine ca.: 180 kgdimensions of the machine ca.: 870 x 710 x 1435 mmEquipment :- semi-automatic circular saw for cutting PVC and aluminum profiles- two-hand safety operation- Miter adjustment : left 0 / - 45 / - 60 right 0 / 45 / 90- Large protective hood, covers entire working area- Saw blade- 2x vertical pneumatic clamping cylinders- Adjustable blade and cutting feed- Air dust gunWork sequence1) Setting the cutting angle2) Inserting the material3) Adjusting the stroke speed4) Bring the clamping cylinder up to 20 mm of material5) Clamp the material6) The machine is ready for operation by pressing the start button.7) Press and h ...
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,27 tdimensions: 1,1 x 0,95 x 1,7 m- Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hoodThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
