Manufacturer:
(Category: 105)
Year: 2017 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - hydraulic feed brake - pressure reducer
Saw blade diameter: max. 450mm, blade speed: 2800rpm, workpiece clamping: pneumatic, saw blade bore: 32mm, main motor power: 2 × 2.2kW, lubrication system: minimum quantity lubrication, control: numerical control panel with electronic display. An on-site inspection is possible.
Technical data Manufacturer: Pressta Eisele Type: PRIMUS Type No.: 250 Type: Miter Circular Saw Machine for Metal Machine No.: 4209 Year of Make: 2001 Configuration With adjustable mitre stop and angle scale, pneumatic clamping devices, work table with stop, compressed air maintenance unit, protective cover with transparent privacy screen, machine light and base with storage compartment. Remarks Electrical connection data and speed are not clearly recognizable on the available photographs. The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-49302-9
cutting diameter: 15 - 560 mm: 560 x 630 mmdimensions of saw-band: 7.400 x 54 x 1,60 mmControl: KASTO material feed - single: 900 mmmultiple feeding length: max. 9.999 mmcutting length min.: 6,00 mmsawing motor: 5,50 kWcutting speed: 13 - 127 m/minheight of material-table: 700 mmtotal power requirement: 12,00 kWweight of the machine ca.: 6,00 tdimensions of the machine ca.: 3,70 x 2,50 x H2,50 mAutomatic two-column band saw with KASTO Compact Control,frequency-controlled saw band drive, chip conveyor, infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1mand outfeed roller 2m, Machine can be inspected under power.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 325 mm
The machine is ideal for the precise cutting of solid material, tubes and profiles made of steel, stainless steel and non-ferrous metals. The NC control system allows repetitive cutting tasks to be carried out efficiently and reproducibly. The robust industrial design makes the saw the ideal solution for locksmiths, steel fabricators and general mechanical engineering. Technical data Manufacturer: BEKA-MAK Type: BMSO 325 Machine Type: Horizontal Metal Band Saw Design: NC-controlled semi-automatic Cutting type: Straight cut 90° Saw blade: approx. 34 × 1.1 × 4,110 mm Belt speed infinitely variable Hydraulic saw feed Hydraulic workpiece clamping Coolant Setup Cutting capacities at 90° Round material: Ø 325 mm Square material: 330 × 325 mm Rectangle material: 500 × 325 mm Facilities NC control Hydraulic material vise Automatic saw feed Lobkn Aszwd E Nj I H Ajrr ...
Key data: 350 mm
Device details: Manufacturer: MEP S.p.A. (Pergola, Italy) Model: TIGER 350 SX Year of manufacture: 2002 (according to nameplate) Serial Number: 135609/27N Motor: 2-stage motor with 1.84 kW / 2.6 kW (1425–1710 rpm) Sales label: Lackner & Urnitsch (precision machines and tools, Graz / Wr. Neudorf) Specifications & Features: Saw blade diameter: 350 mm Cutting range: Suitable for miter cuts (swivel head) and cutting solid material, tubes and profiles made of steel or non-ferrous metals. How it works: Semi-automatic (pneumatic workpiece clamping and pneumatic/hydraulically controlled saw feed via the vertical cylinder). Control: Integrated control unit HEAD POSITIONING SYSTEM from MEP Electronic with emergency stop, operating mode selector switch, stroke limitation and speed levels.
Key data: 350 mm, 45 °
For sale is a professional metal cold circular saw / Miter Saw from the quality brand Pedrazzoli (type Super Brown 350/60 SA, built in 1999). Perfect for locksmithing, steel construction or tube processing. Technical data (according to nameplate & model): Manufacturer: Pedrazzoli IBP SpA (Italy) Model: SB 350/60 SA (Semi-Automatica) Year of Make: 1999 Saw blade diameter: max. 350 mm Mitre cuts: Swivelling saw head for angle cuts Equipment: Pneumatically controlled vice, pneumatic lowering cylinder for saw head, separate control panel with emergency stop & timer module as well as integrated coolant device / maintenance unit. Condition & Note: Solid base with base and drip tray. Normal signs of wear and aging from workshop use. Cabling/hoses should be professionally inspected/sorted before commissioning.
The machine is ideal for professional use in the workshop, locksmith's shop or metal construction as well as for demanding do-it-yourselfers. Model: MOD 250 Drive / connection: 400 volt high-voltage current (CEE plug) Speeds: 2 levels selectable (Lento / Veloce) via control panel Coolant Facility: Integrated Coolant System (Coolant Pump Available) Equipment: Solid vise with quick adjustment/handwheel Degree adjustment / mitre cuts possible Integrated base / base with storage compartment Belt tension meter / pressure gauge on the saw bracket Circuit breaker & control clearly arranged on the control panel Condition: Used with signs of wear and tear (see pictures). Stable and fully functional from workshop liquidation/stock. Note: A visit and a function test on site are possible by arrangement.
cutting diameter: 290 mmcapacity 90 degrees: flat: 320 x 290 mmcapacity 45 degrees: flat: re 240 x 150 mmcapacity 45 degrees: round: re 240 mmcapacity 60 degrees: flat: re 150 x 180 mmcapacity 60 degrees: round: re 150 mmcapacity 45 degrees: flat: li 240 x 100 mmcapacity 45 degrees: round: li 240 mmturning speed range:: 20 - 100 m/minsaw band length: 3100 x 27 x 0.9 mmpower capacity: 2.4 kWweight of the machine ca.: 570 kgrange L-W-H: 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features:- Semi-automatic electro-hydraulic band saw (INDUSTRIE)- Suitable for single-piece and small-batch production- Large, ball-bearing-mounted cast-iron rotary table For miter cuts from 45° left to 60° right- Hydraulic cutting feed Material clamping - Continuously variable band speed (Model F)- Ergonomic control panel- Micro-spray lubrication system (spray oil ...
cutting diameter: 300 mmcapacity 90 degrees: flat: 320 x 290 mmcapacity 45 degrees: flat: re 300 x 280 mmcapacity 45 degrees: round: re 300 mmcapacity 60 degrees: flat: re 190 x 200 mmcapacity 60 degrees: round: re 200 mmcapacity 45 degrees: flat: li 270 x 200 mmcapacity 45 degrees: round: li 270 mmturning speed range:: 20 - 100 m/minsaw band length: 3660 x 27 x 0.9 mmpower capacity: 2.4 kWweight of the machine ca.: 650 kgrange L-W-H: 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features:- Semi-automatic electro-hydraulic band saw (INDUSTRIE)- Suitable for single-piece and small-batch production- Large, ball-bearing-mounted cast-iron turntable For miter cuts from 45° left to 60° right- Hydraulic feed mechanism Material clamping - Ergonomic control panelâfront right, swiveling - Coolant system- Operatoration manual Semi-auto ...
cutting diameter: Ø 255 mmcapacity 90 degrees: square: 230 mmcapacity 90 degrees: flat: 300 x 180 mmdimensions of saw-band: 2765 x 27 x 0,9 mmcapacity 45 degrees: round: 210 mmcapacity 45 degrees: square: 190 mmcapacity 45 degrees: flat: 200 x 160 mmcapacity 60 degrees: round: 135 mmcapacity 60 degrees: square: 110 mmcapacity 60 degrees: flat: 130 x 100 mmcutting speed: 18- 110 m/minpower requirement: 1,5/ 1,8 kWdimensions: 1,7 x 1,95 x 1,83 mweight of the machine ca.: 0,8 tfull automatic one side miter bandsaw NC- controlled- miter cut left 45° full automatic mode- miter cut left 60 half automatic mode- CNC- controll for 10 saw programms and 99 subroutine- automatic lenght movement with ballscrew- roller conveyor feed side- stepless cutting speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting angle: 90 degrees,blade diameter: 650 mm,motor: 9.2 kW,45-degree clamps,machine weight - 1200kgautomatic feeder,the machine includes a roller conveyor. Auction-ID: A7-49398-50
- technically efficient, ready to work – after full service - blade diameter: 350 mm - cutting length: 430 mm - cutting height: 135 mm - horizontal angles: 45°-90°-25° - machine base
workpiece height: 670 mm |throat: 785 mmroll diameter: 800 mmcutting speed: 26- 2000 m/mindimensions of saw-band: 6500 mmpower requirement: 11 kWtable-size: 900 x 900 mmrange L-W-H: 2,24 x 1,1 x 2,9 mmweight of the machine ca.: 2,3 tMachine from a university. Very good conditionEquipment:- welding station- grinding stonesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device Roller conveyors and length stops in different lengths on request
cutting diameter: 250 mmcapacity 90 degrees: flat: 280 x 220 mmcapacity 90 degrees: square: 220 x 220 mmcapacity 45 degrees: flat: 220 x 200 mmcapacity 45 degrees: round: 230 mmcapacity 45 degrees: square: 200 x 200 mmcapacity 60 degrees: flat: 140 x 100 mmcapacity 60 degrees: square: 100 x 100 mmcapacity 60 degrees: round: 150 mmvice: 285 mmturning speed range:: 36/72 m/mindimensions of saw-band: 2950x27x0,9 mmControl: total power requirement: 1,5 / 1,8 kWweight of the machine ca.: 460 kgdimensions of the machine ca.: 1150 x 1970 mmFeatures:- Robust electro-hydraulic semi-automatic band saw (INDUSTRIE)- With miter cuts from 45° right to 60° left Mitre adjustment via a large turntable- MEP EVO microprocessor control for managing all functions Front right, swiveling- Optional manual or automatic lowering of the saw frame Stepless adjustment of the saw frame lowering - Saw blade gui ...
saw blade diameter: 550 mmUnder-table saw for aluminum and PVCHydropneumatic saw blade feedTwo-hand operationMinimum-quantity lubrication systemTable rotates on both sides, with locking positions at +/-45° and +/-60°Mitre cuts up to 60° on both sidesFull protective guardvery good condition!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting speeds: 30/60/130/260m/min, mains connection: 380V/50Hz three-phase, rated supply current: approx. 7.5A, upstream fuse: 20A slow-blow. An on-site inspection is possible.
This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine.
Circular Metal Saw manufactured in 2017. This STEIN BAK10-D features an electrical height adjustment system and individually adjustable caterpillars and saws. It has a maximum saw blade diameter of 400 mm and a regulated saw blade nominal speed ranging from 500 to 4200 rpm. If you are looking to get high-quality cutting capabilities, consider the STEIN BAK10-D machine we have for sale. Contact us for further details.
Serial number: 22602005Workpiece diameter: 10 -76.3 mmMaximum loading length: 6000 mmMaximum loading weight: 2160 kgSaw blade diameter: 285 mmPower: 7,5 kW Auction-ID: A7-40851-1
cutting diameter: 305 mmsaw band length: 3370 mmcutting width: 350 mmdimensions of saw-band: 3370 x 27 x 0,9 mm: 305 mm: 260 mm: 350 x 200 mm: 250 mm: 230 mm: 230 x 200 mm: 175 mm: 155 mm: 170 x 100 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 600 kgdimensions of the machine ca.: 1700 x 1500 x 1950 mmFeatures:- Semi-automatic operation via automatic saw frame lowering- Miters: left 60°, right 45°- 2 speeds: 40 and 80 m/min- Solid material support table- Operatorâs manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: ADIGE Model No.: CM 601 Condition: Used Stock number: 9418 Hours: 14611 h Tube diameter: 12-35 mm Maximum rod length: 4500 mm
150 € 
