Manufacturer:
(Category: 105)
cutting diameter: 320 mmband length: 535 x 40 x 2,0 mmcapacity 90 degrees: square: 300 mmcapacity 90 degrees: flat: mmcutting speed: m/minno. of strokes: 45 - 62 - 90 - 125 Hub/mintotal power requirement: 3,0 kWweight of the machine ca.: 0,35 Kgdimensions: 1,4 x ,4 x 1,2 mHydraulic bow saw with:- Coolant system- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 450 mmsaw band length: 6600 x 41 x 1,3 mmtable height: 800 mm: 450 mm: 450 mm: 450 x 270 mmworkpiece weight: 15 - 95 m/min: 7,5 kWwork height max.: 3000 kgconnected load: 3750 x 1400 x 2100 mmControl: NEW PRICE ~ 40.700 EUROvery good conditionSemi-automatic bandsaw, two-column guidedEquipment:- hydraulic vice- infinitely variable cutting speed- chip conveyor- line laser- driven chip brush- coolant device- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible.
Offer 26014 Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Material replenishment machine - Discharge roller conveyor 4000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2300 x H 1750 x D 2200 mm - Weight approx. 1800 kg
cutting diameter: 220 mmcapacity 90 degrees: square: 220 x 220 mmturning speed range:: 20 - 140 m/minsaw band length: 3720 x 34 x 1.1 mmheight of material-table: 825 mmcoolant capacity: 80.0 ltotal power requirement: 2.5 / 3.5 kWweight of the machine ca.: 1500 kgrange L-W-H: 2350 x 2050 x 1500 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8Equipment:- electro-hydraulic band saw - FULLY AUTOMATIC- for sawing hollow profiles and solid materials made of steel, stainless steel,. tool steel, non-ferrous metals and plastic- control panel on the front right including button for manual operation (setup/individual cut)- electro-hydraulic material clamping- stepless cutting speed .. 20-140 m/min.- electro-motor chip conveyor- manual adjustment of the material feed range via handwheel including analogue value display- automatic height adjustment of the saw fra ...
A precision circular saw Rohbi is available. Solid material cutting range: 50mm, tube and profile cutting range: 50-60mm, max. saw blade diameter: 225mm, bore: 20mm, speed: 1400rpm, max. feed length: 600mm, max. cutting length: 160mm. Machine dimensions X/Y/Z: approx. 1700mm/850mm/1600mm, weight: approx. 400kg. An on-site inspection is possible.
cutting diameter: 325 mmsaw band length: 4200 mmcutting width: 500 mm: 15 - 150 m/min.work height max.: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 4200 x 34 x 1,1 mmcapacity 90 degrees: round: 325 mmcapacity 90 degrees: flat: 500x300 mm: 300 mm: 300x300 mm: 200 mm: 200x200 mmweight of the machine ca.: 1250 kgdimensions of the machine ca.: 2250 x 2100 x 1280 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 90 degrees: flat: 400 x 260 mm: 250 mm: 240 x 240 mm: 240 x 260 mm: 250 mm: 250 x 250 mm: 290 x 250 mmcapacity 60 degrees: round: 160 mmcapacity 60 degrees: square: 160 x 160 mmcapacity 60 degrees: flat: 110 x 260 mm: 190 mm: 190 x 190 mm: 210 x 190 mmdimensions of the machine ca.: 1700x2000x1600 mmweight of the machine ca.: 960 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 1106479 : 400 miter: ja cooling: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 255 mmdimensions of saw-band: 2750 x 27 x 0,9 mmcutting width: 200 x 320 mmcutting speed: 20 bis 80 m/min: 125 mm: 125 x 125 mm: 195 mmImpact energy: 350 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 290 Kgdimensions: 1,1 x 0,8 x 1,75 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 235 mmdimensions of saw-band: 2645 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 45/90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 400 Volttotal power requirement: 1,1 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 510 mmcutting diameter: 150 mmcapacity 90 degrees: flat: 450 x 150 mmcapacity 90 degrees: square: 150 mmturning speeds: 29 / 58 m/min.total power requirement: 4,2 kWweight: 1,55 trange L-W-H: 1,8 x 1,7 x 1,7 mmLong-cut cold circular saw, semi-automatic- with miter adjustment left 50°, right 60°- digital cutting angle display- hydraulically adjustable feed speed- hydraulic workpiece clamping- 4 spare saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,59 tdimensions: 1,9 x 1,4 x 1,8 mHydropneumatic Fully Automatic• Mitering Left/Right• Bevel cuts up to 45° (shifter) a. b.• Pneumatic double clamping device• Pneumatic vertical clamping device• Integrated coolant spray systemMPS control:• Save cutting start/end position• Display of power consumption, piece count, cutting time, etc.• Adjustable water cooling• Cutting pressure regulatorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sawblade width max.: 120 mmWeight: 350 kgMotor output: 1,3 kWWINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-ABPNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness.Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding.Technical specifications:- Band Saw Width 15-120mm- Tooth pitch Max. 60mm Tooth depth 0-30mm- Tooth forms PV,NV,KV,PU,NU- Hook angle -10° to +30°- Feeding rate 0-90 teeth/min.- Motor quantity 2- Grinding wheel motor – 1.1kW, 1400 r.p.m.- Gearbox motor double-rev. – 0.55kW, 1400 r.p.m- Grinding wheel diameter Ø250mm- Grinding wheel bore diameter Ø20mm- Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch)- Operating voltage 400V, 3Ph, 50-60Hz- Total power ~1,3kW- Dimensions 80120175cm- Net/gross weight 350/375kgPNK-AB ...
Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg
Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm
Technical data: - Cutting range at 90° around 260 mm - flat 260 x 260 mm - Material replenishment machine max. single stroke 600 mm - Max. section length in multi-stroke mm - Saw blade dimensions approx. 4100 x 32 x 1.2 mm - Cutting speed infinitely variable 12 - 100 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Chip conveyors - Total drive power 400 V / 8.5 kW - Space requirement approx. W 2350 x H max. 2340 x D 3050 mm - Weight approx. 3000 kg - from location D - 14943 Luckenwalde
Key data: 320 mm
Machine type: Automatic band saw Manufacturer: Jaespa Type: W320AZ Year of Make: 2002 Condition: used / gearbox damage Price Vb Location Warstein , Germany Reference number M-JAE-0226 DESCRIPTION We offer you a used band saw from the manufacturer Jaespa. Gearbox needs to be replaced. Weight approx. 2t Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
A fully automatic hydraulic horizontal band saw Amada in scissor design is available. Round cutting capacity: 254mm, rectangular cutting capacity: 254mm/279mm, saw band dimensions X/Y/Z: 3505mm/27mm/0.9mm, speed: 80m/min, feed: 390mm/stroke, max. cutting length: 3500mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/1500mm, weight: approx. 1250kg. An on-site inspection is possible.
cutting diameter: 320 mmsaw band length: 3400 x 27 x 0.9 mmcapacity 90 degrees: flat: 320 x 400 mmcapacity 45 degrees: flat: LI 320 x 280 mmcapacity 45 degrees: flat: RE 320 x 260 mmcapacity 60 degrees: flat: RE 320 x 140 mmband speed: 35 + 70 m/minwork height max.: 930 mmvoltage: 400 Vtotal power requirement: 2.67 kWweight: 950 + 250 kgrange L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on requestEquipment:- electro-hydraulic vertical mitre bandsaw- with large cutting range and small footprint- Robust material support table- miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right- Up to 99 cutting programs- Central operation of all machine functions from the front- Loading also possible from above- Precise positioning thanks to accurate measuring system- electro-hydraulic miter adjustment lef ...
KNUTH VB 510 Metal Band Saw, BJ 2018 Operating voltage:400 V Frequency: 50 Hz Connection: 1.5 kW Table dimensions:600x500 mm Incl. whetstone and sanding belt device Dimensions set-up:1150x700x2000 mm Weight:approx. 400 KG
Hacksaw RUCOCO RSR 500-4 -Saw diameter 500mm -Stroke rates 34-48-60-85 strokes /min -Mitre cutting device -Replacement saw blade 850x75mm -Machine feet -Roller conveyor Hjbkn Au Ssvc Dnxo Tsl -Coolant device -Documentation Dimensions: LxWxH 2.2x1.1x1.5 meters / Weight 2750Kg
Band Saw FORTE F320 -Cutting range 90 degrees / Round - 320mm -Cutting Area / Square - 300mm -Cutting area 45 degrees 220x200mm -Cutting speed 20-100 mm/min -Cutting pressure hydraulically adjustable -Material length stop -Motor 1.5 KW -Saw blade dimensions 3660x25x0.9mm -Roller conveyors -Various replacement saw blades Dimensions: LxWxH 2.2x1.2x1.6 meters / Weight 700Kg
Cutting range at 90° Round: 210 mm Square: 210 mm Flat: 240 x 190 mm Cutting range at 45° Round: 150 mm Square: 150 x 100 mm flat: 150 x 100 mm Saw blade dimensions: 400 x 30 x 1.5 mm 2 lifting speeds by pole switching. Motor: 16 & 32 m/min Drive motor: 380 V, 0.9 kW Weight: 170 kg Space requirement: 1190 x 480 x 1300 mm
This JAESPA W 440 HA Metal Band Saw was manufactured in 2015. It features a saw band length of 4,900 mm and operates on 400 V / 25 A. Certified with CE standards, consider the opportunity to buy this JAESPA W 440 HA Metal Band Saw. Contact us for more information.
This Emmegi Luna 450 TU/5 Circular Metal Saw was manufactured in 2008. It features a saw blade diameter of 450 mm and a spindle diameter of 32 mm. The saw blade motor operates at 2.2 kW with a speed of 2800 rpm. It supports cutting lengths from 310 mm to 5000 mm and has a weight of 1400 kg. Dimensions are 9400x1400x1838H. Contact us for more information about this machine.
Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details.
This Behringer VAL350NC Circular Metal Saw was manufactured in 2008. It features a cutting capacity for round materials of 115 mm and rectangular materials of 200 Ã 70 mm. The saw blade diameter is 350 mm, powered by a robust 6.5 / 8.0 kW drive. With a weight of approximately 2.3 tons, this machine is equipped with a BEHRINGER PLC control system and a micro spray lubrication system. Consider the opportunity to buy this Behringer VAL350NC Circular Metal Saw. Contact us for further details.
