Manufacturer:
(Category: 106)
Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg
pressure: 110 tthroat: 290 mmstroke: 20-124 mmno. of strokes: 60 / 90 Hub/minram adjustment: 85 mmtable surface area: ca. 920 x 590 mmram surface: ca. 530 x 280 mmdistance table to upper part of the press: ca. 450 mmhole in the table: ca. 180 x 300 mm mmtable height: ca. 750 mmtool hole in ram: Ø 50 mmNumber of working hours: 8214 hdistance table to upper part of the press: mmweight of the machine ca.: 5,5 tdimensions: ca. 2000 x 2000 x 2600 mmoverhauled by the manufacturer Helmerding in 2014 including conversion to new onespress safety control.Operating hours read since overhaul in 2014: 8214Documentation of press safety control availableelectrical grease central lubricationHydraulic clutch-brake combinationMechanical break plate in the ramtwo-hand operationfoot controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type: Toggle press Manufacturer: unbek. Condition: used / good Offer will only be sent if a complete imprint is provided! Price 125 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623-6 DESCRIPTION We offer you a used toggle press, see pictures. Another 60 presses on offer. Availability: immediately Our offer is aimed at traders who are registered within the meaning of the trade regulations according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are excepted!
pressure: 100 tchamfer lenght: 2050 mmcontrol: CYBELEC DNC 880S weight: 8000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1100 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 110000
Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg
Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between table and slider: 1500 mm Capacity of the main drive: 220 kW Table size: 2000x4500 mm Machine dimensions: 5910x8700x10355
pressure: 20 tthroat: 185 mmstroke: 100 mmtable surface area: 380 x 350 mmdayligth: 250 mmtable height over floor: 840 mmtotal power requirement: 4 kWweight of the machine ca.: 1,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm
Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s
Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data
Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t
Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg
Press Schüco Model 290124 Type 2 Specifications: •pneumatic • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Enclosed tool: included (see photos)
FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...
Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall ...
pressure: 160 tdistance between columns: 850 mmstroke: 150 mmtable surface area: 850x650 mmtotal power requirement: kWweight of the machine ca.: 7 tdimensions of the machine ca.: 2,5 x 2,5 x 3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump
Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump
Specifications: Capacity: 60 t Passage between stand: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Flow speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design made of welded steel -Manometer - Fine adjustment of pressure - Additional hand pump
Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t
Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.
Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm
Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.
Eccentric Press Brand Ebu Type EP15 Table size 400x430mm Max pressure 15 000kg Table height adjustment Table passage D160mm Stroke adjustment 4-70mm Ram bore 40mm Projection 200mm Max distance table-tappet 320mm Single/Duration Stroke Shield Flywheel D600mm 400V 1.0kW Machine weight ca. 870 kg The purchase price is net. Can be viewed and tested in our warehouse. Delivery is possible at an additional cost. All information without guarantee!
Used press for crown corks CALLAHAN. Very good working condition. Sizes of the sheets 896x734 mm. Short crown corks - 6,00 mm.
