Manufacturer:
(Category: 106)
pressure: 100 tthroat: 355 mmstroke: mmtotal power requirement: 11,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3 t, 150 mm
For sale in new condition HYUNDAE CETTA HHP-3 hydraulic press "more pieces" manufacturer: HYUNDAE "Korea" type: HHP-3 year of manufacture: 2018 load range: 1-3 tons Stroke [mm] 150 open height: 250 mm -safety light gate -two-handed operation .-mobile work table Hyundae press control Pressing rod closing speed: 178mm/sec Pressing rod pressing speed: 54mm/sec Opening speed 79 mm/s Table size: 450x360mm Max. Working pressure: 60kg·f/㎠ Hydraulic motor 1,5 kW 3 phase/4P 200v Weight: 350kg machine height "without table": 1415mm machine length: 950mm machine width: ca 700mm working table with casters or level bolts
Key data: 5 t, 150 mm
Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed (Approach Fast Speed: 350 (mm/s) Lower Speed (Under Pressure Slow Speed: 36mm/s Rise Speed 250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size Height (mm) 986 Width (mm) 485 Depth (mm) 920
Key data: 10 t, 200 mm
for sale in new condition ATSUGI 10 Ton Hydraulic Press Atsugi AP-10-KL Dcec N Dov Sd Hto Akrok year of manufacture:2007 Used load range:40-100 (kN) Stroke (mm): 200 Lower speed (approach fast speed: 350 (mm/s) Lower speed (under pressure slow speed:180 mm/s Rise speed 200(mm/s) Operating area: Open height: 350mm Open depth: 225mm Table size: 430x410mm Motor specification 3 phase AC200V 4P 1.5KW Two-hand operation . Mobile workbench Operating oil / quantity Daphni Hydraulic 46/9L Total weight (kg) 500 Body size Height (mm) 1325 Width (mm) 485 Depth (mm) 915
Inv. Num. : 8585 Type: KPRW 160 Producer: Kieserling Created: 1972 Parameters: Compressive force: 160 t
Inv. Num. : 8584 Type: PEDA 160 Producer: IWK Created: 1972 Parameters: Compressive force: 160 t
Inv. Num. : 8583 Type: REP 100 Producer: Heilbronn Created: 1989 Parameters: Compressive force: 100 t Stroke length: 6-100 mm Maximum stroke rate per minute: 100 1/min Total power requirement: 11 kW Machine weight: 7000 kg
Offer 25247 Specifications: - Max. pressing force 50 t - Max. ram stroke approx. 260 mm - Lifting speed fast approx. 1540 mm/min - Lifting speed slowly approx. 210 mm/min - Stand width approx. 770 mm - Stand depth approx. 195 mm - Min. / max. installation height approx. 200 / 1100 mm - Table height-adjustable with 5 plug-in bolt grids each approx. 180 mm - Support plate approx. 450 x 450 mm - Height adjustment of the table with hand crank cable - Drive 400 V / 1.5 kW - Space requirement approx. W 1750 x H 2100 x D 850 mm - Weight approx. 600 kg
pressure: 60 tthroat: 280 mmstroke: 10-140 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 740x560 mmram surface: 380x195 mmhole in the table: 300x200 mmtable height: 760 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 tthroat: 220 mmstroke: 8-96 mmno. of strokes: 120 Hub/minram - range of adjustment: 50 mmtable surface area: 580x440 mmram surface: 305x170 mmhole in the table: 215x175 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 tthroat: 230 mmstroke: 4-80 mmno. of strokes: 120 Hub/minram - range of adjustment: 55 mmtable surface area: 695x455 mmram surface: 365x180 mmhole in the table: 220x180 mmtable height: 890 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tthroat: 300 mmstroke: 10-140 mmno. of strokes: 60 Hub/minram - range of adjustment: 60 mmtable surface area: 800x500 mmram surface: 430x230 mmhole in the table: Ø150 mmtable height: 860 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The Dorst DK 250 is a robust used powder compaction press engineered by DORST, offering a substantial pressing force of up to 2500 kN. It supports operations with a maximum withdrawal force of 150 kN and a supporting force in the pressing position reaching 120 kN. Designed for precision, this model includes a 220 mm upper punch stroke with an adjustable travel of 120 mm. The press accommodates a pressing travel and withdrawal travel, each up to 50 mm, making it versatile for various pressing tasks. Operational performance ranges from 6 to 25 strokes per minute, and it provides a filling height of up to 100 mm. The Dorst DK 250 is efficient, consuming approximately 500 liters of air per minute and demanding a connected load of around 60.0 kW. Its dimensions, at 2500 mm in width, 1900 mm in depth, and 4800 mm in height, alongside a weight of approximately 18,500 kg, underscore its solid co ...
AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(), 30kW - Japanese standard Pgsc N D D Hou Dxb Tjxop Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.
Nominal pressing force ... 100t Table dimensions ... 1000 x 640mm Stroke adjustment ... 125mm Plunger adjustment ... 90mm Number of rams ... 75-150 rpm Main engine power ... 6/10kW L x W x H ... 1725 x 2230 x 2970mm Mechanical weight ... 10100kg
pressure: 25 tthroat: 200 mmstroke: mmpressure: 25 tno. of strokes: 140 Hub/minwindow in frame: 240 mmadjustment of stroke: 8...80 mmram - range of adjustment: 50 mmsurface of ram: 355 x 220 mmtable-size: 560 x 400 mmhole in table: 160 mmtotal power requirement: 3 kWweight of the machine ca.: 2,23 tdimensions of the machine ca.: m- distance table slide: 250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.
Hydraulic 60 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 60 ton Year of manufacturing: 1975
Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Technical data Nominal Power : 30 ton Year of manufacturing: 1973
Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 30 ton Year of manufacturing: 1982
Key data: 75 t, 80 mm, 120 1/min
Pressure 75 t Stroke rate 120-600 / min Sheet width 10-300 mm Table size 1050 x 820 mm Pusher clamping surface 960x820 mm Distance table - UK plunger 380 mm Adjustable stroke - max. 80 mm Feed length 0-150 mm Total power requirement 20 kW Machine weight approx. 13 t Feed unit with max. belt speed 70 m/min Eccentric shaft with 4-fold bearings 2 connecting rods Central lubrication incl. magnetic belt conveyor - in use until 2020 -Operating instructions -Manual - Circuit diagram etc..
used
Bakker horizontal pressLength: 3500 mm Depth: 3100 mm Height: 1600 mm Weight: 6 ton
pressure: 200 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of ram: 274 mmcontrol: Cybelec ModEva Pac total power requirement: kWweight of the machine ca.: 17.000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 62 tdistance between columns: . mmstroke: 360 mmTable area: 2500x580 mmdayligth: 400 mmdiameter - coniflex cutter: Zilinderdurchmesser 200 mm0: 200 barStud passage: 590 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mVideo: https://www.youtube.com/watch?v=gkuLoo7ABkcThe tech. Data aremanufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ...
pressure: 120 tchamfer lenght: . mmdistance between columns: 2550 mmstroke: 200 mmtotal power requirement: 13,2 kVANumber of working hours: 2500 htotal power requirement: kWweight of the machine ca.: 8,3 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 160 t, 3700 mm
Control Delem ... DA - 56 s Thrust... 160t Bending length... 3700mm controlled axes ... 4 Drive... Hydraulic Max. ram stroke... 260mm Main engine power ... 15kW Machine weight ... 10700kg L x W x H ... 4750x1850x2660mm The machine is in good condition, possible to test under power.
: 150 t: 3100 mm: 2600 mm: 400 mm: 200 mm: 600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
