other metal working machines used for sale (11,174)

Powerful spray cleaning for a wide range of parts Also for heavy workpieces From lightly oiled to heavily soiled Further data on request

Rollers Bending Machine ZOPF TRENNJAEGER RS 302 ME Year of construction: 1993 Capacity: 1/4'' to 1 1/2'' - Ø 10 mm to Ø 60 mm Rectangular tube 50 x 30 x 3 Square tube 40 x 40 x 3 (see description on photo) 1 set of rollers 1'' - 6/4'' - 1 1/4'' + various (see photos) Voltage: 380 V Dimensions (L x W x H): 1000 x 1000 x 1600 mm Weight: approx 200 kg

saw blade diameter: 1310 mmcutting diameter: 440 mmstroke: / mmweight of the machine ca.: 7,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  CNC controls SIEMENS 840 D SL CHARACTERISTICS HEAT TREATMENT EQUIPMENT  heating method: induction DIMENSIONS / WEIGHTS  space requirements -left/right-: 8044 mm  space requirements -front/back-: 8046 mm  total height: 4000 mmELECTRICAL SPECIFICATIONS  mains power supply: 624 kVAPower Data:Mains connection power: 624 kVAMains voltage: 400 VRated current: 900 AMains frequency: 50 HzTransformer:Power: 560 kVAVoltage: 400 / 580 VCurrent: 809 / 558 AFrequency: 50 HzConverter:Power: 552 kVA / 450 kWVoltage: 750 VCurrent: 667 AFrequency: 6 – 10 kHzStarting:Power: 50 kWVoltage: 400 VCurrent: 90 AFrequency: 50 HzAuxiliary Equipment:Voltage: 400 VCurrent: 25 AFrequency: 50 HzControl Voltage:Voltage: 230 / 24 VCurrent: 5 / 40 AFrequency: 50 Hz / DCAutomation KUKA Roboter

CONTROLS  electronic controls BOSCH REXROTH CML 40.2 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE  length: 50 mm  diameter: 700 mmELECTRICAL SPECIFICATIONS  total power consumption: 100 kWThe machine processes workpieces with an outer diameter of 20–50 mm and lengths between 300 and 700 mm. With a cycle time of approximately 20 seconds, it enables high production speeds whilst maintaining consistent quality.

CNC press brake Type: TrumaBend V 50 Manufacturer: Trumpf Year: 2003 Control: Delem Hours: 6970 Controlled axes: 4 (X, Y1, Y2, R) Pressing force: 50 t Maximum bending length: 1200 mm Ram stroke: 215 mm Shut height: 385 mm Distance between stands: 1040 mm Throat depth: 410 mm Hydraulic working pressure: 290 bar Power consumption: 8 kVA Power supply: 3 × 400 V, 50 Hz Weight: 4,750 kg Machine in very good condition, fully functional, under power Find more here - / Contact us at -

Inv. Num. : 9173 Type: CM-H32Z Producer: CHMER Created: 2001 Parameters: Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 250 mm Maximum workpiece length: 610 mm Maximum workpiece height: 200 mm Maximum workpiece height: 420 mm Maximum table load: 120 kg Length: 1523 mm Width: 1183 mm Height: 2158 mm Weight: 700 kg

Inv. Num. : 9172 Type: EDNC 65 Producer: MAKINO Created: 1998 Parameters: Max. travel length of the X-axis: 650 mm Max. travel length of the Y-axis: 450 mm Max. travel length of the Z-axis: 350 mm Maximum electrode weight: 100 kg

This PROFILATOR VF-320-L was manufactured in 2015. A Modular Gear Machining Center, it features a flexible system for dry machining with multiple process modules tailored to specific needs. Key features include programmable synchronization, modular design, and suitability for dry machining. Ideal for automotive gearbox components and high-precision gear components. If you are looking to get high-quality gear machining capabilities, consider the PROFILATOR VF-320-L machine we have for sale. Contact us for more information.

Manufacturer: Alzmetall Model: AB 4/HST Year of Manufacture: 2001 Voltage: 400 V Speed Range: 60 - 1,530 rpm Motor Power: 2.6 / 3.1 kW (3.5 / 4.2 hp) Tool Holder: MT 4 Throat Depth: 330 mm Spindle Stroke: 200 mm Height: 2,135 mm Weight: 850 kg Find more here - / Contact us at -

Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2003 Operating Hours: approx. 124,705 h (as of May 2026) Total Connected Power: 33 kW Voltage: 400 V / 50 Hz Condition: No known defects. Available for live demonstration. CNC Control - Control: TX8i (64-bit) - Screen: 10.4 inch flat panel display - Interface: V24 RS232 in control cabinet - MDE Interface: Machine running / piece counter - Tool monitoring included - Thread cutting without compensation chuck - Programming: At machine control or via WinFlex IPS software on PC Main Spindle - Spindle Bar Capacity: 36 mm - Max. Speed: 6,300 rpm - Drive Power: AC 6.7 / 10.7 kW - C-axis included - Hainbuch collet chuck system (manual change device included) Counter Spindle - Motor spindle with C-axis - Counter-clamping pressure device - Workpiece ejector - Hainbuch Axfix collet chuck - Upper tool carrier with driven tools and ele ...

Manufacturer: Perndorfer Model: WSS5020/1HD18 5/1ASK Year of Manufacture: 2011 Operating Voltage: 400 VAC Frequency: 50 Hz Back-up Fuse: max. 40 A Control Voltage: 24 VDC BHDT High-Pressure Intensifier - Manufacturer: BHDT - Type: Intensifier - Max. Working Pressure: 400 MPa (4,000 bar) - Max. Flow Rate: 3.8 l/min - Manufacturing Week/Year: 47 / 2011 Find more here - / Contact us at -

Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 4025 mm -Width: 1990 mm -Stamp diameter: 63 mm -Stroke: 110 mm -Lifting capacity: 20 t -Overall dimensions: 1990/4025/H1920 mm -Weight: 5060 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Material: Cast iron -Quantity: 16x mounting cubes available Price: per piece -Dimensions: 500/700/H500 mm -Weight: 277 kg

Number of axes: 4, x-axis: 400mm, y-axis: 300mm, z-axis: 350mm, connected load: 5kVA, equipment: rotary spindle, controlled C-axis, CNC conversational control system, Handy Genius remote hand-held control unit, tool holder: Erowa ITS 007523 quick-clamping chuck, 16-position electrode changer, extraction unit, C-module Z+K, automatic CO₂ fire extinguishing system, paper cartridge filter, electronically controlled heat exchanger, high-pressure flushing system (defective), rotary head up to 750rpm and tube guide. An on-site inspection is possible.

power capacity: kWfeed pressure: 10 barvolume capacity: 5,0 m³/mintotal power requirement: 7,5 kWweight of the machine ca.: 0,4 kgScrew Compressor- Operating hours (readout): 17,442 / 22,500- Sound-dampening enclosureThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of axes: 4, x-axis: 400mm, y-axis: 300mm, z-axis: 350mm, connected load: 8.3kVA, rated current: 12A, weight: 3t, equipment: rotary quill, controlled C-axis, CNC conversational control system with 4 axes, hand-held control unit, tool holder: Erowa ITS quick-clamping chuck, 20-position electrode changer, paper cartridge filter. An on-site inspection is possible.

X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible.

3 assen: Y1 / Y2 / X Amada bomberingCapacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6,5 ton

BG 600 Hoogte: 900 mm D: 780 mm d: 360 mm induction heated

length: 2000 mmwidth: 700 mmwork height max.: 900 mmdimensions of the machine ca.: 2,0 x 0,7 x 0,9 mweight: 130 kgWorkbench - Made in GermanyIndustrial quality, particularly robust and durable design for the highest demands!demands!Workbench top 45 mm thick made of high-quality multiplex beechThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mmwidth: 700 mmwork height max.: 900 mmdimensions of the machine ca.: 2,0 x 0,7 x 0,9 mweight: 160 kgWorkbench - Made in GermanyIndustrial quality, particularly robust and durable design for the highest demands!demands!Workbench top 45 mm thick made of high-quality multiplex beechDrawers 1 piece left 1 piece rightCladding right, left rearThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis Brother HS-70A wire EDM machine was manufactured in 2003. It features a CNC-A50 control, working strokes of 410 x 260 x 170 mm, and can handle workpieces up to 350 kg. The wire diameter ranges from 0.1 to 0.3 mm, supporting precise cutting. If you are looking to get high-quality EDM capabilities, consider the Brother HS-70A machine we have for sale. Contact us for more information about this machine.

Coordinate grinding machine Hauser 3 SM BJ 1996 Surface Grinding Machine Okamoto BJ 1996 Cylindrical Grinding Machine White W11 BJ 2009

Hello, For sale is a Keyence IM-8030T digital measurement projector including rotation axis. The measuring machine was purchased in August 2025 and has been used very rarely since then. The complete measuring unit is immediately ready for use and immediately available. Prior sale and errors excepted.

AGIE CHARMILLES FO 350SP die-sinking EDM was built in 2013 in China by Beijing Agie Charmilles Co., Ltd. The machine is in very good condition, fully operational and regularly serviced throughout its service life. The AGIE CHARMILLES FO 350SP is used in the production of precision tools, moulds, dies or punches. The machine uses an electrical erosion method that enables complex shapes to be made in even the hardest materials. This method also minimises or completely eliminates the need to undertake additional finishing processes, such as polishing. The machining process is performed in a dielectric-filled work tank. The use of dielectric increases the surface quality and dimensional accuracy of the workpieces, and its level and working pressure are continuously monitored by an advanced measurement system. The work table, in turn, has T-slots for fast and easy clamping of workpieces. A ...

Schuster VTM 350 Year of manufacture 2005 see pdf on the for specifictions The machine is in working, good condition The 2005 Schuster VTM 350 is a vertical turning lathe designed for precision machining of medium-sized components. This machine integrates advanced features to enhance productivity and accuracy in various industrial applications. Key Specifications: - Maximum Turning Diameter: 200 mm - Maximum Workpiece Height: 350 mm - X-Axis Travel: 200 mm - Z-Axis Travel: 400 mm - Spindle Speed: Up to 8,000 rpm - Tool Turrets: Two turrets, each accommodating 12 tools - Spindle Motor Power: 20 kW - Machine Dimensions (L x W x H): 3,000 mm x 1,700 mm x 3,350 mm - Machine Weight: Approximately 6,000 kg Features: - CNC Control System: Equipped with the Rexroth Indramat System 200 BTV 20, providing precise control over machining operations. - Stepless Feed Rates: Allows feed rates u ...

Futureline 650 2004 Stama MC 021 + Fanuc Robodrill Year of manufacture 09/2004 The machine is in working, good condition The 2004 Stama MC 021 is a vertical machining center equipped with a Fanuc Robodrill system, designed for high-speed, precision milling and drilling operations. This machine is integrated into the Schuster Futureline 650 production line, enhancing its automation capabilities for efficient manufacturing processes. Key Specifications: - Model: Stama MC 021 - Year of Manufacture: 2004 - Control System: Fanuc 16i-MB CNC - Axis Travels: - X-axis: 500 mm - Y-axis: 400 mm - Z-axis: 330 mm - Table Dimensions: 650 mm x 400 mm - Maximum Table Load: 250 kg - Spindle: - Taper: SK 30 - Speed: Up to 20,000 rpm - Motor Power: 7.5 kW - Tool Magazine Capacity: 21 tools - Additional Features: - Integrated chip conveyor - Cooling through spindle (IKZ) - Optional NC dividing head for ...

Hello