subcategories
(3rd category level)
Manufacturer:
(Category: 109)
- Double hoist 60 + 60 Ton- Lifting class H2- Freqence vario speeds- Hoist ABUS GM 7600U6- FEM Group 1Am- Ikusi remote (TM70 2.13)- Little used / Under power / Direct availebel
- Lifting height 6000 mm- Work load maximum 1000 Kg- Rotation speed 2,5 M/Min- Power 0,4 kW- incl. 2 sling ropes
- High precision accuarcy ( two step proces)- 1e step cutting using skiving knives- 2 step cold-form rollers for highest surface toleraces- For Superfinishing Hydraulic and Pneumatic Cylinders / Rods- ECOROL Boring heads in diameter:- 40/50/63/80/90/100 mm - Maximum out side diameter 250 mm- Swing over bed 700- Center height 350 mm - Drilling carriage- Rapid feed rate both directions 6000 mm/Min- Max. Drilling thrust 35000 N - Feeder carriage- Rapid movement 5000 mm/Min- Thrust against workpiece 35.000 N- Hydraulic approach stroke 150 mm
Number of Spindles8Gun Drilling Diameter Range1.5mm-10mm (Per Spindle)Maximum Drilling Depth150mmDrill Spindle Stroke350mmPellet Die Diameter500mm-1550mmB-Axis Accuracy+/- 6 Arc SecondsY-Axis Vertical Travel400mmGun Drill Speed Range0-14,000 RPM The LD8-150 Pellet Die is a multi-spindle gun drilling machine from Mollart’s line of deep hole drilling machines that provides accurately drilled holes for pellet dies up to 1550mm in diameter. The LD8-150 is an eight spindle (also available in four spindle) deep hole drilling machine for designed for accurately drilling thousands of holes in to pellet dies. The drilling spindles are arranged radially around the work spindle to provide simultaneous drilling on all sides of the die for maximum efficiency. The machine can be outfitted with various workholding options for securing the pellet dies for drilling, providing the ability to thous ...
- Drilling, Milling, Tapping for heatexchanger bases and plates - Swivable A Axis + 25 to - 15 Degrees- Filtration and Coolant system 1000 L- Cip conveyor 2000 x 1200 height out put- Milling tool changer Tower Station 20 positions- Capacity ELB Drilling 3 - 35 mm - Capacity Milling 250 ccm/Min - Feed rates all axis 15.000 mm/Min X-Y-W-Z- Cutting hours ca 15.000- Large tooling package
- 4 side complete machining- Swiveling drilling and milling unit- DCM Dynamic Collison Monitoring- CAM-Model- QCK ( Quick Check Kinematics)- Transfer bore cycle (380-382)- 90 Bar IKZ Coolant system- Extra ATC Tower 24 position (4 x 6) HSK 63- Double ballscrew construction- Clear tank 1650 L and Waste tank 1300 L- Chip conveyor
- Stroke speed slide step 1 : 4 - 20 M/Min- Stroke speed slide step 2 :0,3 - 3 M/Min- Rotation chuck step 1 : 300 Rpm and 320 Nm- Rotation chuck step 2: 100 Rpm and 1290 NmHorizontal deep hole honing machineHorizontal tube honing machineHorizontal cylinder honing machineHorizontal pipe honing machineFine finishing of cylindrical bores
Oven, heating oven, heating chamber, heating cabinet, hardening oven, annealing oven -Manufacturer:Artur Nolzen, Chamber dryer oven type KTS 53/30/70 -Temperature: max. 1100 °C -Chamber size: 710 x 535 x 300 mm -Heating output: 25 kW -Automatic temperature control -Individual components: see photos -Dimensions: 1630/1530/H1700 mm -Weight: 1698 kg
Clamping plate, marking and scribing plate, scribing plate, cutting table, cutting liner -Clamping plate: Cutting table -Support surface: with 5° angle divisions -Sheet thickness: 20 mm -Dimensions: 965/965/H565 mm -Weight: 168 kg
A Deckel engraving and copy milling machine is available. Table dimensions X/Y: 350mm/200mm, travel X/Y: 300mm/150mm, machine dimensions X/Y/Z: approx. 1100mm/1300mm/1500mm, weight: approx. 500kg. An on-site inspection is possible.
A complete Winema CNC rotary transfer production line including interlinking, peripherals and a washing system is available. 1) Winema RV20 Flexmaster rotary transfer machining center, stations: 6, machining positions: 12, max. material passage: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, holes: 8.7mm/15mm/17mm/18mm, reaming: 9mm/15mm/18mm, cycle time: approx. 7s, throughput capacity: approx. 500parts/h, control system: Siemens Sinumerik 840D. 2) Winema bar loading magazine, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Knoll Turbofilter coolant cleaning system, dirty tank volume: 500l, clean tank volume: 150l, filter fineness: 50mm. 4) Knoll cooling unit, cooling capacity: 15kW, max. oil temperature: 30°C. 5) UAS oil mist extraction system, separation efficiency: 96%-98%. 6) Interlinked continuous washing system with automatic parts transf ...
ORT LE60 2-roll lapping-rolling-burnishing machine (of cylindrical surfaces), stainless steel shafts for example This machine can be inspected under power in our warehouse. We can supply the know-how required to run it Mimu Machine Tools
ORT 3RP10 PLC thread rolling machine, inverter (RPM), scaffolding sleeves threading, shelves studs threading Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Thread rolling is a metal forging process that forms threads into the mirror image of a roller die., Number of rollers: 3
