subcategories
(3rd category level)
Manufacturer:
(Category: 109)
A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.
Qty. 1 Second-hand extrusion press line Mfc.: Breda Sutton, Cometal, OMS Type: oil hydraulic, Dia.: 7 inch, 178 mm Force: 1600 MT Built: 1977 Fully reconditioned in 1995 Scope of supply: Log feeder Billet Furnace Hot Shear Extrusion Press Run-out Table Puller Cooling Bed Stretcher Finishing saw Aging Furnace Die Furnace
CNC lathe Type: CTX 510 Ecoline Manufacturer: DMG Year: 2011 Control: Siemens Sinumerik 810D Max turning diameter: 465 mm Max swing over bed: 680 mm Max swing over support: 465 mm X: 300 mm Z: 1050 mm 315 mm 3-jaw hydraulic chuck Max spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% DC): 33/22 kW Max spindle torque (40%/100% DC): 33.5%: 630/420 Nm Maximum rotation speed of driven tools: 4000 rpm Programmable tailstock Tool probe Chip conveyor Suction Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions: 5250 x 2300 x 2000 mm Machine weight: 8000 kg In good condition, under power After repairing the linear line Accessories: Both external and internal tool holders Driven tool holders – direct and lateral Drill holders Hard jaws - 1 set Soft jaws - approx. 10 sets Find more here - .ucymachines/ Contact us at - sales@ucym ...
weight of the machine ca.: 6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Various metalworking machines and peripheral equipment are available. 1) 2x B-axes. 2) 2x flat gear motors FH77DER. 3) 3x helical gear brake motors R87DRS132S4BE11. 4) Flat gear motor FH77GDRS. 5) Variable displacement axial piston pump. 6) 2x Eisele saws with roller conveyor. 7) Drilling machine. 8) 2x pallet trucks. Some of the machines are defective. An on-site inspection is possible.
Macsa id K series CO2 laser coding and marking equipment. Manufacturer: Macsa ID Type: SPA K-1030 Power supply: 125V/230V; 50/60 Hz; (1 phase+N) 660VA Marking head: KS2-1000-10.2 μm, CO2 sealed laser tube, RF technology, 10.2 microns Working distance: 85-400 mm Dimensions: 235x193x656 mm Weight: 40 kg IP54
serial number: 1296 : ja changer: ja fachdocumentation: ja control: Heidenhain 426 weight of the machine ca.: 6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: LEINHAAS Model: AR11-160 RH 1 Year of Manufacture: 1991 Mains voltage: 3x400V / PEN / 50Hz Control voltages: 220V AC 50Hz / 24V DC Press connected load: 44 kW Total connected load: 55 kW Machine operating hours: 62,212.3 h Machine type: differential travel press Press force: 1300 kN Additional equipment : The strip feed system can also be purchased separately - Strip feed system from ALBA (Includes coiler, straightener, and roller feed) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Used parts cleaning system MOC 50 for operation with solvent or cold cleaner The machine is equipped with a lifting device with a rotation function, through which a basket is immersed in the degreasing medium using the immersion method, thus cleaning the parts. The heating function of the machine is defective, but this is irrelevant in the case of cold cleaner or solvent-containing medium. The system ran flawlessly until the end. Sale due to new acquisition.
Manufacturer: WMG Model: BMT 105 PTP Year of Manufacture: 2003 Type of Machine : Horizontal Boring Machine Voltage: 400V Frequency: 50Hz Current Rating: 63A Protection Class: IP43 Control Voltage (Uc): 24V DC Machine Specifications: - Control: CNC Heidenhain TNC 124 - Table Size: 1750 mm x 2000 mm - Spindle Diameter: 105 mm - Travel (X/Y/Z/W): - X: 2500 mm - Y: 1850 mm - Z: 1400 mm - W: 700 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines
Hardness Tester WOLPERT Testor - HT 1E Brinell: 250 kg Rockwell: 150 kg Projection: 125 mm Workpiece height - max.: 200 mm Machine weight approx.: 70 kg Approx. space requirement: 400 x 200 x 700 mm Test load: 62.5 / 100 / 150 / 187.5 / 250 kg. Brinell Dto. 100 and 150
Machine with water tank and automatic wire threading, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters, etc.)
