subcategories
(3rd category level)
Manufacturer:
(Category: 109)
Fanuc manipulatierobot die een last van 700 kg kan hanteren Het heeft een bereik van 2832 mm en is gemonteerd op een chassis van ± 18 meter.
used
Picot 2100 x 10 mmNumber of rolls: 3 rolls Roll capacity cold: 2100 x 10 mm Roll dia upside: Ø 240 mm Dia under roll - side rolls: Ø 180 mm Weight: 3200 kg
Manufacturer: ELB Model: Optimal 6375 Year of Manufacture: 1990 Magnet 500 x 350 mm Accesories: Coolant tank 5 grinding wheel flanges Various used grinding wheels Balancing scale with mandrel for grinding wheels Find more here - .ucymachines/ Contact us at - sales@ucymachines
Robot cell including safety enclosure and light curtain 6-axis robot HYUNDAI HH020 Transfer weight/free payload 13 kg Matrix version, material supply using matrices We currently have 2x SherpaLoader 20 in stock, e.g. built in 2018, approx. 7,500 operating hours (of which >70% is waiting time in front of the machine for the next loading request). Component dimensions Ø10 – 200 mm, length 10 – 200 mm; effective payload up to 13 kg, raw parts are supplied to this system via grid matrices. Before sale, the system will be serviced with - Software update for master control and HMI - Gear grease change on axes 1 - 6 - Encoder battery replacement on axes 1–6 and mainboard - Replacement of all energy chain cables on axes 3–6 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Control: Fanuc x-travel: 660 mmweight: 4 t: ja control: Fanuc 10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: KAESER Model: BSD 72 SFC Year of Manufacture: 2012 Machine type: Screw Compressor Rated Power: 37.0 kW Motor Speed: 2960 1/min Max. Operating Pressure: 8.5 bar Ambient Temperature: 3 degrees C / 45 degrees C Until February 2020, this compressor was our main supplier for the system, i.e., between 500 and 700 hours per month. Since February 2020, this compressor has only been used as a backup and during maintenance of the second compressor. The compressor currently has 51,532 operating hours.
Manufacturer: Bystronic Model: BySprint Fiber 3015 Year of Manufacture: 2013 4KW Hours in picture Find more here - .ucymachines/ Contact us at - sales@ucymachines
x-travel: 4500 mmy-travel: 2000 mmz-travel: 1200 mmspindle taper: ISO 50 Cube: 2 weight of the machine ca.: 20.000 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STKThe tool shown in the illustration is a Sandvik Coromant T-Max Q-Cuthead for grooving, identified more precisely by part number 570-40R1513-09-50. Manufacturer: Sandvik Coromant Type: T-Max Q-Cut head for grooving (slotting) Connection: SL head (screw-mounted) - size 40 Hand: Right-hand Maximum cutting depth: 9 mm Coolant supply: Axial concentric inletThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machining sides: 3, workpiece materials: aluminium/steel, travel X: 4000mm, feed rate: 120m/min, A-axis: +/-110°, spindle speed: 18000rpm, tool holder: SK30, tool positions: 8, max. profile dimensions X/Y/Z: 4000mm/250mm/190mm, machine dimensions X/Y/Z: approx. 5750mm/2100mm/2350mm, weight: approx. 4000kg, control: Mecal. Documentation available. On-site inspection is possible.
workpiece weight per basket: 0basket dimensions: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece weight per basket: 0basket dimensions: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
12 assen: Y1 / Y2 / X1 / X2 / X3 / R1 / R2 / R3 / Z1 / Z2 / Z3 / V 5 plaatsteunen aan de voorkant Willa hydraulische gereedschapsadapter 3 achteraanslageenheden Achteraanslagbereik: 1250 mmCapacity: 400 ton x 7100 mm Backgauge: CNC Control: Cadman Passage between uprights: 6050 mm Max stroke: 300 mm Max distance between table -- ram: 550 mm Depth of throat: 300 mm Table width: 250 mm Locking speed: 90 mm/sec Working speed: 9,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 37kW Weight: 38 ton
clamping plate: 595 x 445 mmdrawing length: 400 mmstroke: 400 mmweight of the machine ca.: 1.600 tdimensions of the machine ca.: 1.400 x 1.200 x 1.500 mmMinimum/maximum cutting speed: 0 - 20 m/minMinimum/maximum return speed: 40 m/minMaximum workpiece diameter according to DIN6885 (bore): 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
voltage: 110 - 230 Vfrequency range: 50 - 60 HzPower connection: 0,5 kVADimensions (HxWxD): 1000 x 800 x 1750 mmweight: 150 kgMeasuring machine for bar knives.Equipment/accessories: -Measuring tools -Clamping devices -Computer -Monitor -Printer -Cabin -Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Herding Extraction System COMP 1500-8/9 SB Manufacturer: Herding GmbH Filtertechnik Model: Herding COMP 1500-8/9 SB Year of manufacture: 2018 Type: Industrial Extraction System / Filter System Air volume flow: 2000 m³/h Weight: 1000 kg Control: Herding MP 12 Filter cleaning: pneumatic pulse cleaning Machine ID: 28694 Machine ID: 28695 CE marking: available Number of units: 2
GEKA HYDRACROP 55/S hydraulic ironworker machine was built in Spain in 2022 by MAQUINARIA GEKA S.L.U. This machine, distinguished by its extensive machining capabilities, is intended for precise hole and corner punching as well as shearing flat bars, angles and solid bars. Each of the 5 work stations is controlled by two hydraulic cylinders, which enable independent or parallel operation at two stations simultaneously. All this makes the offered GEKA HYDRACROP 55 S ironworker machine the perfect choice to significantly increase the productivity of any industrial plant. GEKA HYD 55 S weighs 1200 kg. Technical specifications of the GEKA HYDRACROP 55/S 2-cylinder ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - total power: 5.5 kW - power supply: 400 V; 50 Hz - weight of ...
sheet width: 3000 mmplate thickness: 8,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 6,80 tdimensions of the machine ca.: mMotorized backgauge with fine adjustment via handwheel up to 1000 mmCutting length limiterSharpened bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 6 St.: 70/100 kg: ca. 820 x 740x 560 mmweight: ca.110 kgdrawer measurements: 450 x 600 mmColour: 7035/5012 RALThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
8 assen: Y1 / Y2 / X1 / X2 / R1 / R2 / Z1 / Z2 4 plaatsteunen aan de voorkant laserveilige beveiliging Willa gereedschapCapacity: 220 ton x 6100 mm Backgauge: CNC Control: Cadman-B Touch Passage between uprights: 5050 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 120 mm/sec Working speed: 21 mm/sec Returning speed: 200 mm/sec Electric motor (power): 42 kW Weight: 24 ton
LVD MVS 6200 x 6,35 mmCutting length: 6200 mm Max sheet thickness st 45: 6,35 mm Passage between uprights: 6400 mm Depth of throat: 60 mm Strokes/min: 10 > 465 str/min Adjustable cutting device: 0,05 > 0,7 Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 11 kW Weight: 17,5 ton
water cooling unit: ja ampere: 250 weight of the machine ca.: 200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 3 multifix: ja weight: 2 t: 500 centre distance: 1300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 600-500 mmweight of the machine ca.: 300 kgdimensions of the machine ca.: 1400 x 1100 x 1700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
LVD PPNMZ 1200 ton x 12 meter CNCCapacity: 1200 ton x 12 meter Backgauge: CNC Passage between uprights: 5050 mm Max stroke: 300 mm Max distance between table -- ram: 600 mm Depth of throat: 350 mm Table width: 300 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 46 mm/sec Electric motor (power): 44 kW
taper MK: 2 Dimensions (L/W/H): 800 x 400 x 1500 mmweight: 300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
current intensivity: 475 Awater cooling unit: ja weight of the machine ca.: 300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible.
A Welter slotting machine for gear and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm, weight: approx. 12500kg, control: Siemens. The machine was retrofitted in 2011. Documentation available. On-site inspection is possible.
